Download for T2600G-28TS V4

Please choose hardware version:

>How to find the hardware version on a TP-Link device

IMPORTANT: Model and hardware version availability varies by region. Please refer to your TP-Link regional website to determine product availability.
Vx.0=Vx.6/Vx.8 (eg:V1.0=V1.6/V1.8)
Vx.x0=Vx.x6/Vx.x8 (eg:V1.20=V1.26/V1.28)
Vx.30=Vx.32 (eg:V3.30=V3.32)

Product Overview

T2600G-28TS(UN)_V4_Datasheet

Manual

MIBs Files

T2600G-28TS(UN)_v4_MIB_20190530		Download
Published Date: 2019-09-25	Language: English	File Size: 200.33 KB
Operating System: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux

T2600G-28TS(UN)_V4_MIB_20181010		Download
Published Date: 2019-05-13	Language: English	File Size: 206.12 KB
Operating System: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux

802.1X Client

TP-LINK_802.1X_Client_Software		Download
Published Date: 2017-09-05	Language: English	File Size: 5.5MB
Operating System: Win2000/XP/2003/Vista/7/8/8.1/10

Driver

TP-LINK_USB_Console_Driver		Download
Published Date: 2019-03-13	Language: English	File Size: 3.10 MB
Operating System: Win2000/XP/2003/Vista/7/8/8.1/10
Notes: For TP-LINK switches with USB Console port

FAQs

How to configure LACP on our Smart/ Managed Switch 10-29-2024233378
How to Block Unknown Devices to Access the Switch by Using IP Source Guard 08-09-202475027
Why the firmware version does not change after upgrading in T Series switches? 08-09-202461817
How to configure IGMP Snooping for IPTV network using L2 switch 08-09-2024221916
How to configure the default gateway of the smart and managed switches using the old GUI 08-09-2024255290
What is the Console Cable and the line sequence of it? 08-02-2024126651
How to build a Campus Network using TP-LINK products 08-02-202492885
The difference between the Voice VLAN feature and Auto VOIP feature 07-23-202478799
What should I do if I cannot access the web management page of my TP-Link switch? 07-23-2024344396
Do you still have any doubt about the effect of QoS on the Switch of TP-Link? 07-23-202488289
How to block an illegal client with Certain IP address from getting access to the network using TP-Link Managed Switches 07-01-202478055
How to access TP-Link JetStream Managed Switch via the Console port 06-29-2022360256
How to configure 802.1Q VLAN on L2 Managed switches using the old GUI 06-29-2022419542
How to Configure Port Isolation Function on Our Layer 2 Manage switches through Web Browser 06-29-2022126510
How to limit the port rate of the incoming traffic via ACL function 06-28-202258427
How to test the Jumbo Frame pass-through feature on TP-Link switches 06-28-2022183366
How to build up a multi-nets network via Multi-Nets NAT feature on TP-Link router with L2+/L3 switches 06-28-2022321954
How to change the IP address of the smart and managed switches using the old GUI and CLI 06-28-2022323695
How to configure MAC ACL on Smart/Managed switch 06-28-202283907
How to configure the DHCP Relay in TP-Link Switch 06-27-2022254444
How to configure Voice VLAN to optimize the transmission of voice traffic on TP-Link Smart and Managed Switches using the new GUI 06-27-2022109812
How to configure 802.1Q VLAN for LAG ports on Smart and Managed switches using the new GUI 06-27-202289083
How to configure OpenSSH 7.0(and above) to login smart and managed switches? 04-17-2018132222
The nodes that TP-Link T1600/T2600 series switch use to display the CPU and Memory utilization through SNMP 12-26-201667936
How to configure Extended IP ACL 04-28-201284189

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty.
How to find the hardware version on a TP-Link device
Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

T2600G-28TS(UN)_V4_20200110		Download
Published Date: 2020-04-15	Language: English	File Size: 17.14 MB
Modifications and Bug Fixes: Fix the bug that CPU will reach 90% if close the telnet connection when changing the password for first logining switch through telnet. Notes: 1. For T2600G-28TS(UN) V4.0. 2. Your device's configuration will not be lost after upgrading, which means you don't need to configure your device again after upgrading.

T2600G-28TS(UN)_V4_20190530		Download
Published Date: 2019-07-11	Language: English	File Size: 17.10 MB
Modifications and Bug Fixes: 1. Update HTTPS to support TLS1.2. 2. Fix the bug that the settings of SNMP Community/Notification/Trap will lose after rebooting the switch when turning off the global switch of SNMP function. 3.Fix the bug that the IP in circuit-ID is wrong when the VLANs which the port belong to does not set up the interface and PPPoE IP insertion is IP mode. 4. Fix the bug that NTP server will be changed when setting up only one NTP server and fail to get the time. 5. Fix the bug that cannot set up auto mode for fibre ports which in the port channel. 6. Fix the bug that access control entries will not take effect when two or more entries are added for port binding. Notes: For T2600G-28TS(UN) V4.0.

To Use Third Party Firmware In TP-Link Products

Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.

Open Source Code For Programmers (GPL)

Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.

You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.

The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.

GPL Code

T2600G-28TS(UN)_V4_GPL

Emulators

Firmware Version	Working Mode	Language
180322(UN)	-	English	Browse

Note:

1. The emulator is a virtual web GUI where you can experience the TP-Link product management panel.

2. The listed emulators might not have the latest firmware.

3. The features displayed are for reference, and their availability may depend on local regulations. For more information, please refer to the datasheet or product page.