How to Configure Load Balance on Omada Controller

Configuration Guide
Updated 06-27-2022 07:01:35 AM FAQ view icon133328
This Article Applies to: 

Load Balance is to avoid a single EAP having overloaded clients while other EAPs are idle. In the topology below, we have an EAP, because of the random distribution of wireless clients, there may be too many clients connected with this EAP. At this time, we want to “Balance” and “Guide” weaker signal clients to connect to other EAPs.

https://static.tp-link.com/image001_1518511361028j.png

This document will introduce how to configure the load balance function on Omada Controller.

Based on the topology above: we can see that

  1. A newly added client is trying to connect to EAP A.
  2. EAP A is almost overloaded with 20 clients connected, while EAP B is idle with only 3 clients connected.
  3. At this time, we want the client with a weaker signal to connect to EAP B.

Here are the configuration methods of the Load Balance function on TP-Link EAP/Omada Controller:

For V3 controller :

Go to Access Points. Choose one of the EAPs that you want to enable Load balance on. Then select Configuration->Load Balance->Enable Max Associated Clients, RSSI Threshold, and click Apply.

You can set the Load Balance function in 2.4G and 5G radio separately.

https://static.tp-link.com/image002_1518511371017x.jpg

For V4 controller :

Go to Devices----APs. Choose one of the EAPs that you want to enable Load balance on. Then select Config -> Advanced -> Load Balance -> and Enable Max Associated Clients, RSSI Threshold and click Apply.

You can set the Load Balance function in 2.4G and 5G radio separately.

Explanations:

  1. Threshold means the “maximum number of clients for each EAP” before the Load Balance function is triggered. In this instance, we set it as “20”, which means each EAP can have 20 clients at most before the Load Balance function is triggered. Here EAP A already reaches this limitation (20 clients). In other words, EAP A already has overloaded clients so the Load Balance function may be effective to disconnect clients with weaker signals. Then those clients will connect to another EAP.

RSSI Threshold: Enable this function and enter the threshold of RSSI (Received Signal Strength Indication). When the clients' signal is weaker than the RSSI Threshold you've set, the clients will be disconnected from the EAP

Related Articles:

How to Configure Band Steering on TP-Link Omada Controller?

What is Fast Roaming of TP-Link Business Wi-Fi Products?

What is TP-Link EAP/CAP Airtime Fairness?

Is this faq useful?

Your feedback helps improve this site.

Recommend Products

Community

TP-Link Community

Still need help? Search for answers, ask questions, and get help from TP-Link experts and other users around the world.

Visit the Community >