How to Configure Bridge Mode on TL-WR700N

User Application Requirement
Updated 05-25-2016 02:58:41 AM FAQ view icon33049
This Article Applies to: 

Definition:The TL-WR700N borrows existing wireless Internet and broadcasts it using a different network name(SSID) and password. This application can create two individual networks for two groups of users sharing one Internet. 

Application: Small restaurant,shop,bar,home,office and others where Internet service needs to be provided for guests without revealing the password of the existing network for hosts.
 
Physical Connection
 
Step 1:
Connect the WR700N directly to your computer’s Ethernet port by an Ethernet cable;
 
Step 2:
Power on the WR700N
 
Initial Computer Setup– For Windows 7, Vista & XP (For Mac OS X, please go to page3)
 
Step 1:
Windows 7&Windows Vista: Go to Start->Control Panel ->Network and Sharing Center
Windows XP: Go to Start->Control Panel->Network Connections
 
Step 2:
Windows 7: Go to Network andSharing Center->Change Adapter settings
Windows Vista: Go to Network andSharing Center->Manage Network Connections
Windows XP: (Go to Next Step)
 
Step 3:
Windows 7, Vista and XP: Right Click Local Area Connection ->Select Properties -> Double Click Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol (TCP/IP) for Windows XP.
 
Step 4:
Windows 7, Vista and XP: Select “Use the Following IP address:
Type the following information:
IP address: 192.168.0.10
Subnet mask: 255.255.255.0
Click OK to exit
Click OK again to apply the settings.
Windows 7, Vista & XP
 
Initial Computer Setup– For Mac OS X
Go to the Apple->System Preferences>Network-> Highlight Ethernet ->Configure IPv4: Using DHCP with manual address
Input the IPv4 Address: 192.168.0.10
Click Apply
 
Access the Management Page
 
Open a Web Browser -> Type 192.168.0.254 in the address bar -> Press Enter
 
Enter the default User Name: admin
Enter the default Password: admin
Click OK
 
Run Quick Setup
 
Step 1:
Go to Quick Setup-> Click Next
 
Step 2:
Select Bridge-> Click Next
 
Step 3:
Click Survey
 
Locate your router network name under the SSID column, remember the Channel (The channel your wireless network is using)-> Click Connect
 
Channel: Please select the same channel that your existing wireless network is using too
Security Options: (Please match Security Options with your existing router)
Please refer to Original Equipment Manufacturer for details
Password:  (Please match Security Password with your existing router)
 
Step 4:
Click: Next
 
If you want to provide an open network to your guest, please select Disable Security. Otherwise, select: Enable Securityand input the PSK Password.
PSK Password: Create a new security password for the guest wireless network
 
Step 5:
Click Next
 
Step 6:
Click: Reboot, and wait until it goes to 100%
 
Relocate the WR700N
 
You may now relocate the WR700N to a centralized location in order to broadcast a guest network.
Congratulations! You have created a temporary guest wireless network which shares the internet without exposing your wireless password.
 
Final Computer Reversion– For Windows 7, Vista & XP (For Mac OS X, please go to page 9)
 
Step 1:
Windows 7&Windows Vista: Go to Start->Control Panel ->Network and Sharing Center
Windows XP: Go to Start->Control Panel->Network Connections
 
 
Step 2:
Windows 7: Go to Network andSharing Center->Change Adapter settings
Windows Vista: Go to Network andSharing Center->Manage Network Connections
Windows XP: (Go to Next Step)
 
Step 3:
Windows 7, Vista and XP: Right Click Local Area Connection ->Select Properties -> Double Click Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol (TCP/IP) forWindows XP.
 
Step 4:
Windows 7, Vista and XP: Select “Obtainan IP address automatically” and “Obtain DNS server address automatically
Click OK to exit
Click OK again to apply the settings.
Windows 7, Vista & XP
Final Computer Reversion – For Mac OS X
Go to the Apple>System Preferences->Network-> Highlight Ethernet ->Configure IPv4: Using DHCP
Click Apply.
 
Get to know more details of each function and configuration please go to Download Center to download the manual of your product.

Is this faq useful?

Your feedback helps improve this site.

Community

TP-Link Community

Still need help? Search for answers, ask questions, and get help from TP-Link experts and other users around the world.

Visit the Community >