How to install LTE external antennas on Archer NX200

When working in the MBB(mobile broadband) interface type, you can manually install LTE external antennas (not included in the product package) to strengthen the LTE signals of your router.

Before You Start

• Make sure your antennas support the working band.

• Make sure your antennas have the same connector type (SMA Male).

• Make sure your router is working using the MBB interface type. If not, open the web interface and go to Quick Setup to reconfigure the interface type.
• How to log into the web-based management interface of TP-Link Wireless 4G LTE Router

Follow the steps below to install your external antennas:

1. Remove the antenna cover on the back of your Archer NX200

2. Connect your 5G external antennas to the antenna ports.

Note: The image of antennas is for reference only and may differ from actual products. We cannot guarantee the performance while using any third-party 5G external antennas.

3. log in to the web interface, go to Advanced > Network > Mobile WAN and enable External Antennas. When enabled, the external antennas will replace part of the internal antennas.

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.