TL-FC111A-20
New10/100 Mbps WDM Media Converter
- Complies with 802.3u 10/100Base-TX, 100Base-FX standards
- Auto-negotiation of Half-Duplex/Full-Duplex transfer mode
- Adopts WDM technology, transmitting and receiving data on one single fiber
- Extends fiber distance up to 20km
What This Product Does
How This Product Works
TL-FC111A-20 adopts WDM (wavelength division multiplexing) technology, helping send and receive data at a distance of up to 20 km with only a single mode fiber, which saves half of the cable deployment cost for customers. TL-FC111A-20 transmits data at 1550nm wavelength and receives data at 1310nm wavelength on optical fiber. Therefore, the terminal device used in conjunction with the TL-FC111A-20 should send data at a wavelength of 1310nm and receive data at a wavelength of 1550nm. TP-Link another media converter TL-FC111B-20 is one of the products that can cooperate with TL-FC111A-20.
Other Features
Besides, this media converter can be used as a standalone device (no rack required) or used with TP-Link’s TL-FC1420 rack for auto MDI/MDI-X in TX port in which duplex mode is automatically negotiated.
NETWORK | |
---|---|
Standards and Protocols | IEEE802.3, IEEE802.3i, IEEE802.3u |
ENVIRONMENT | |
---|---|
Operating Temperature | 0˚C to 50˚C (32˚F to 122˚F) |
Storage Temperature | -40˚C to 70˚C (-40˚F to 158˚F) |
Operating Humidity | 10% to 90% RH non-condensing |
Storage Humidity | 5% to 90% RH non-condensing |
HARDWARE FEATURES | |
---|---|
Interface | • 1× 100 Mbps SC Fiber Port• 1× 10/100 Mbps RJ45 Port (Auto MDI/MDIX) |
Network Media | 100BASE-Tx: 2-pair UTP/STP of Cat. 5 or above (≤100 m) |
Power Supply | External Power Adapter: 5 V/0.6 A |
LED | PWR, Link/Act |
Dimensions ( W x D x H ) | 94.5*73*27 mm |
Wave Length | 1550 nm TX, 1310 nm RX |
MEDIA CONVERTER & MODULE | |
---|---|
Fiber Type | 9/125 μm single-mode fber (≤20 km) |
OTHERS | |
---|---|
Package Contents | • Media Converter TL-FC111A-20• Power Adapter• Installation Guide |