Download for TL-SG2210P
Vx.0=Vx.6/Vx.8/Vx.9(eg:V1.0=V1.6/V1.8V1.9)
Vx.x0=Vx.x6/Vx.x8/Vx.x9 (eg:V1.20=V1.26/V1.28/1.29)
Vx.30=Vx.32/Vx.33 (eg:V3.30=V3.32/V3.33)
- Product Overview
- Manual
Setup Video
-
How to Set Up the Whole Network of Gateway, Switches, and EAPs Using Omada SDN Controller
This video will demonstration how to do a full configuration with TP-Link Omada products including gateway, switches and EAPs. As an example, we are going to build the wired and wireless networks from scratch at our TP-Link Office. The setup consists of 7 steps: Step 1. Log in to the Controller Step 2. Adopt Devices Step 3. View Dashboard and Menus Step 4. Set up WAN Step 5. Set up LAN and VLANs Step 6. Set up Wi-Fi Step 7. Set up ACL
More Fold
FAQs
- Troubleshooting for Voice VLAN and Auto VoIP
- How to Configure Management VLAN on TP-Link Smart and Managed Switches Using the New GUI
- Troubleshooting multicast video issues on Omada switches
- How to configure Switch Port Mirroring on Omada Controller
- How to configure 802.1Q VLAN on Smart and Managed switches using the new GUI
- How to configure LACP on our Smart/ Managed Switch
- How to configure IGMP Snooping for IPTV network on L2 Managed switches using the new GUI
- Troubleshooting guide for ARP Learning Failure
- How to configure Storm Control on Omada Switch via Omada Controller
- How to configure Class of Service (CoS) through Omada Controller
- How to configure Jumbo Frame on Omada Controller
- Suggested configurations for AVoIP protocols on Omada Switches
- How to configure Auto-VoIP on Omada Switches via Omada Controller
- Configuration guide of DHCP Options on Omada Switch
- Troubleshooting of Layer 2 Multicast Failure
- How to configure IGMP Snooping on Omada switches for hotel IPTV scenario
- How to configure 802.1X VLAN Assignment on Omada Controller
- Recommended ACL configuration on Omada Switch for common scenarios
- What's the difference between Master Administrator, Administrator and Viewer account in Omada Controller?
- How to use the Ping tool in Omada APP
- What should I do if I cannot access the web management page of my TP-Link switch?
- Do you still have any doubt about the effect of QoS on the Switch of TP-Link?
- Getting started without an Omada Controller
- How to configure Management VLANs for Omada Switches and APs (for SOHO scenario)
- How to configure Management VLANs for Omada Switches and APs (for Business scenario)
- What should I do if my switch has no Internet access?
- What should I do if my Internet from switch is unstable?
- How to configure DHCP Auto Install to let switch get configuration file and image from TFTP server
- How to build an 802.1X access authentication system using Switches on Omada Controller
- Why my PoE powered device cannot work properly when connected to the PoE Switch？
- How to block an illegal client with Certain IP address from getting access to the network using TP-Link Managed Switches
- What are the differences in features and application scenarios among various serial switches?
- How to configure Optical Line Terminal (OLT) and Omada Switch with XM60A
- How to configure LAG (LACP) on Omada Switches via Omada Controller
- How to configure VLAN Interfaces and Static Routes on Omada Switches
- What to do if devices in the same VLAN fail to communicate with each other when connected to TP-Link switch
- Best practice to prevent network loops with Omada SDN solution
- How to configure switch as DHCP server on Standalone mode
- Using Omada controller to configure multiple SSIDs with different VLANs on TP-Link Omada EAPs and Switches to work with a non-Omada gateway(Multi-Net NAT supported)
- How to Manage Omada Devices at Different Sites Using Omada SDN Controller via Port Forwarding (Controller 5.0 or Above)
- How to Manage Omada Devices at Different Sites Using Omada SDN Controller via VPN (Controller 5.0 or Above)
- What is 2FA and how to use it in Omada platform
- Typical CLI Configuration Examples for TP-Link JetStream Switch
- How to test the Jumbo Frame pass-through feature on TP-Link switches
- How to configure RSTP on TP-Link switches using the old GUI
- How to change the IP address of the smart and managed switches using the old GUI and CLI
- How to configure MAC ACL on Smart/Managed switch
- How to choose PoE switch
- How to check and modify VLANs on a TP-Link JetStream switch via SNMP
- How to achieve AAA Authentication through TACACS + server on the switch
- How to configure OpenSSH 7.0(and above) to login smart and managed switches?
Firmware
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty.
How to find the hardware version on a TP-Link device - Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
TL-SG2210P(UN)_V3.2_3.20.2_20210806 |
Download | |
|---|---|---|
| Published Date: 2021-08-26 | Language: English | File Size: 8.81 MB |
|
This firmware is fully adapted to the Omada SDN platform but only compatible with Omada controller v4.3.5 or above. If you are using an old Omada controller and plan to upgrade firmware for EAP, then you must upgrade the Omada controller as well. Please follow the Upgrade Guide to upgrade the Omada Controller.
Enhancement/Bug Fixed: 1. Fully adapt to Omada SDN Controller 4.3.5. 2. Improved the stability of the Layer-3 interface. 3. Fixed the bug of invalid traffic statistics. 4. Fixed the bug when forwarding bi-directional traffic with specific applications.
Notes: 1. For TL-SG2210P(UN) 3.0,3.20 and 3.26. 2. This firmware is applied to Omada APP of version 3.0.x or above. 3. Please upgrade the switch to the middle firmware Build 20210407 first before upgrading to this firmware or later one. |
||
|
TL-SG2210P(UN)_V3_20210407 |
Download | |
|---|---|---|
| Published Date: 2021-05-26 | Language: English | File Size: 8.61 MB |
|
New Feature/Enhancement: |
||
|
TL-SG2210P(UN)_V3_20200106 |
Download | |
|---|---|---|
| Published Date: 2020-03-26 | Language: English | File Size: 9.04 MB |
|
Notes: |
||
To Use Third Party Firmware In TP-Link Products
Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.
Apps
- Omada APP
TP-Link Omada lets you configure settings, monitor network status and manage clients, all from the convenience of a smart phone or tablet. Learn more about Compatible Devices.
Note: SDN switch/router is compatible with Omada App only in controller mode. To use Omada, please update your device's firmware to the latest version.