Изтеглете за TL-R600VPN

FAQs

Why virtual server (port forwarding) feature is not working on your TP-Link Business router? 07-23-2024103335
What to do if you cannot access the remote network through Client-to-LAN/Site VPN tunnel 07-23-2024114972
How to check the link status and data traffic statistics of TP-Link Business Routers with SNMP 07-23-202475053
How to access the internet by using VPN Server as a proxy gateway 07-23-2024193460
Why cannot I get multi-wan bandwidth aggregation test effect via speedtest.net by SMB router? 07-23-2024123010
How to limit specific IP to access to internal server by TP-LINK SMB router 07-23-2024130213
Why your tested throughput is different from our NAT Throughput? 07-01-202477083
How to set up Port Forwarding feature on TP-Link SMB Router (new UI) 01-19-2024155143
How to configure PPTP/L2TP client on remote PC 01-10-2024208499
How to configure Policy Routing on Dual WAN Router using the new GUI 12-27-2023141402
How to setup your SafeStream router in standalone mode 12-27-202396998
How to configure Link Backup on Dual WAN Router using the new GUI 12-27-2023253007
How to Set Up Port Forwarding Feature on My TP-Link SMB Router? 06-29-20221057532
How to set Session Limit on TP-Link Router 06-29-2022315006
How to configure Web Filtering (blocking) on TP-Link SafeStream Routers using the new GUI 06-29-2022303264
How to configure Online Detection for WAN link testing using the new GUI 06-28-202294172
How to configure IPSec LAN to LAN VPN for multiple subnets using the new GUI 06-27-2022109780
How to configure remote management on SMB router using the new GUI 06-27-2022114984
How to configure One-to-One NAT on Safestream routers using the new GUI 06-27-2022111205
How to configure Session Limit and Bandwidth Control to control traffic on SafeStream routers using the new GUI 06-27-202288884
How to establish PPTP Server by SMB VPN Router using the new GUI 06-27-202281636
How to establish L2TP Server by SMB VPN Router using the new GUI 06-27-202297394
How to configure WOL (Wake On LAN) on TP-Link SafeStream Router using the new GUI 06-27-2022226865
How to configure LAN-to-LAN IPsec VPN on TP-Link Router using the new GUI 06-27-2022256632
How to configure GreenBow IPsec VPN Client with a TP-Link VPN Router using the new GUI 06-27-202276814
How to configure Shrew Soft VPN Client with a TP-Link VPN Router using the new GUI 06-27-202278822
How to configure 802.1Q VLAN on TP-Link Load Balance and VPN routers using the new GUI 06-27-2022197853
How to set up access rules for TP-Link SMB router? 09-28-2021100560
How to configure MAC Filtering on TP-Link SMB Routers (New UI) 09-26-202147963
How to configure MAC Filtering on TP-Link SMB Router (Old UI) 09-26-2021434615
Source code template for External Web Portal (Business Router) 03-15-202150470

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty.
How to find the hardware version on a TP-Link device
Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

TL-R600VPN(UN)_v4_4.0.4 Build 20200313

Изтеглете

Дата на пускане: 2020-05-12

Език: English

Размер на файла: 9.99 MB

New Feature/Enhancement:

1. Add DHCP Option 66, Option 150, Option 159, Option 160, Option 176 and Option 242.

2. One-to-One NAT supports the loopback function of the WAN port.

3. Support to obtain SNMP information through WAN port and VPN connection.

4. Support IPv4 Local Scope IP address 239.255.0.0/16.

5. Optimize the mechanism of the session limit function.

6. Firewall optimization for PCI DSS vulnerability scanning.

7. Optimize the DHCP Server mechanism, LAN devices can obtain IP addresses faster.

8. UPnP supports adding random codes to URL to prevent DNS Rebinding attacks.

9. Daylight saving time is adjusted from GMT to UTC.

10. Security vulnerability optimization.

Bug Fixed:

1. Fix the bug that URL Filtering is unsuccessful when accessing a website subdirectory with“/”.

2. Fix the bug that the backup WAN port will not restore PPPoE dialing automatically when deleting the Link Backup entries.

3. Fix the bug that VPN cannot be used after creating multiple IPSec VPN entries.

4. Fix the bug that LAN PC may not be able to upload data to an external server.

5. Fix the bug that the VPN clients at both ends of the IPSec VPN may not be able to communicate with each other after restarting the router or modifying the WAN mode.

6. Fix the bug that the VPN cannot be used normally after opening the DMZ function.

7. Fix the bug that the UPnP NewExternalIPAddress interface cannot correctly obtain the IP address of WAN port.

Notes:

1. For TL-R600VPN (UN) 4.0 only.

2. Your device's configuration won't be lost after upgrading.

TL-R600VPN(UN)_v4_20190227

Изтеглете

Дата на пускане: 2019-03-22

Език: English

Размер на файла: 9.98 MB

1. Update HTTPS encryption suite to TLS1.2
2. Support PCI DSS Scanning
3. Support enable and disable HTTPS Server.
4. Disable telnet function in default Setting.
5. Increase Apple Time Server to default NTP Server.
6. Optimize session limit function
7. Optimize the rules for modifying the MAC address of router when exporting or importing configuration file.
8. Fix the problem that the Rate Control function does not work after the router is restarted;
9. Fix the problem that the link backup function does not work when working in Timing mode;
10. Fix abnormal routing problem in Link Backup function;
11. Fix the problem that can not build Client to LAN and LAN to LAN IPSec VPN when configuring the same Local Subnet.

TL-R600VPN(UN)_v4_20180530

Изтеглете

Дата на пускане: 2018-06-28

Език: English

Размер на файла: 9.93 MB

Modifications and Bug Fixes:
1. Fix DHCP server will hang when modifying it after assigning IP to clients with the same name;
2. Enhance the Firewall module for VPN;
3. Fix bugs that it cannot establish L2TP over IPsec VPN connection when NAT exists;
4. Enhanced contents of System Log module;
5. Improve Dynamic DNS could create multi domain entries for one account;
6. Enhance the stability and speed up the dial process of WAN;
7. Add multi WANs selection for NAT/Policy Routing/primary WAN of Link Backup;
8. Add Only, Priority two modes for Policy Routing feature;
9. Add two sub-modes of Failover mode for Link Backup feature;
10. IP-MAC Binding entries will no longer take effect when ARP Spoofing Defense is disabled.
Notes:
For TL-R600VPN V4.0

To Use Third Party Firmware In TP-Link Products

Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.

Open Source Code For Programmers (GPL)

Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.

You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.

The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.

GPL Code

TL-R600VPN(UN)_V4_GPL

Emulators

Версия на фърмуера	Working Mode	Език
171128	-	English	Browse

Note:

1. The emulator is a virtual web GUI where you can experience the TP-Link product management panel.

2. The listed emulators might not have the latest firmware.

3. The features displayed are for reference, and their availability may depend on local regulations. For more information, please refer to the datasheet or product page.

Изтеглете за TL-R600VPN V4

FAQs

Firmware

To Upgrade

To Use Third Party Firmware In TP-Link Products

Open Source Code For Programmers (GPL)

GPL Code

Emulators

Feature Configuration Guide