How to find Pre-encryption wireless password for TL-MR3020 without Password stick
User Application Requirement
Updated 06-29-2022 01:58:21 AM
135484
135484 This Article Applies to:
After TL-MR3020 is upgraded to new firmware 120817 from older version, the wireless network would be secured by the default pre-encryption password. Below are the steps about how to find and change the default password.
Step 1
Connect your computer to TL-MR3020’s Ethernet Port with an Ethernet cable. Then open your web browser and type in http://192.168.0.254. A window will pop up and ask for username and password. By default, they are both admin.
.jpg){kind=small}
.jpg)
Step 2
After Login, you will see TP-Link Management Page. Please go to Wireless->Wireless Security. On this page, the pre-encryption will be found. See below:
.png)
Step 3
Change this wireless password to your favorite one then Click Save. Reboot is needed to take effect.
Note: if you reset the device to factory default, you will have to do all the above steps again to change the wireless password to your own one.
Полезен ли беше този ЧЗВ?
Вашите отзиви помагат за подобряване на този сайт.
