How to set up a Dynamic DNS service account on High Power Wireless N Router (Router mode--new logo)

Most ISPs assign a dynamic IP address to the router and you can use this IP address to access your router remotely. However, the IP address can change from time to time and you don’t know when it changes. In this case, you might apply the DDNS (Dynamic Domain Name Server) feature on the router to allow you and your friends to access your router and local servers (FTP, HTTP, etc.) using a domain name without checking and remembering the IP address.

Note: DDNS does not work if the ISP assigns a private WAN IP address (such as 192.168.1.x) to the router.

Here we take TL-WR941HP for demonstration.

1. This feature is only available when the router is set to Router mode. Please make sure you have configured the router correctly according to the instructions below.

How to configure Router Mode of High Power Wireless N Router? (new logo)

2. Go to Advanced > Network > Dynamic DNS.

3. Select the DDNS Service Provider: NO-IP or DynDNS. If you don’t have a DDNS account, you have to register first by clicking Go to register. Then enter the username, password and domain name of your account.

4. Enable WAN IP binding.

5. Click Login and Save.

Tips: If you want to use a new DDNS account, please click Logout first, and then log in with a new account.

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.