What to do if there is no history data from the Tapo temperature and humidity sensor
Q&A of functional explanation or specification parameters
Atualizado em: 06-29-2024 03:52:22 AM24189
Este Artigo se aplica a:
Tapo T315 , Tapo T310
Recent updates may have expanded access to feature(s) discussed in this FAQ. Visit your product's support page, select the correct hardware version for your device, and check either the Datasheet or the firmware section for the latest improvements added to your product. Please note that product availability varies by region, and certain models may not be available in your region.
As an owner of the Tapo temperature and humidity sensor T310 or T315, not only can you observe real-time temperature and humidity within the app, but you can also review the historical data to understand the daily, monthly, and yearly changes.
If you notice there is no history data recorded in the Tapo App, or the data stops uploading, the following tips may help to resolve the concerns.
Note: Tapo hub should remain connected to the internet to upload and store Tapo T310/T315’s history data. Data from any power outage period will be lost.
Attempt to manually alter the temperature or humidity in the sensor's surroundings to observe real-time changes in the app. For example, cover the sensor’s top vent hole with your hand, or blow air towards the vent.
Go to Device Settings in the Tapo App -> Device Info -> Tap the signal icon to check the Signal Strength value (RSSI rate).
Strong: more than -50 dBm
Good to Average: among -70 dBm to-50 dBm
Poor: less than -70 dBm
Note: the signal is too weak when it is less than -70dBm, and it is likely to cause a disconnection problem.
Restart the router, wait for 30 minutes then check if the data in the Tapo App has resumed normal recording.
Check if the router has any firewall or ad-blocker settings that might block access to TP-Link servers, preventing the hub from uploading data to the cloud. Disable or remove these settings then monitor future data records.
Change router DNS to 8.8.8.8 and 8.8.4.4.
Restart the Tapo hub.
(Note: unuploaded history data will be deleted after rebooting the tapo hub.)
Esta FAQ é útil?
Seu feedback ajuda a melhorar este site.
Qual é a sua preocupação com este artigo?
Insatisfeito com o produto
Muito complicado
Título confuso
Não se aplica a mim
Muito vago
Outros
Obrigado, senhor
Agradecemos o seu feedback. Clique aqui para contatar nosso Suporte Técnico.
Os cookies de análise nos permitem analisar suas atividades em nosso site para melhorar e adaptar a funcionalidade do mesmo.
Os cookies de marketing podem ser definidos por meio de nosso site por nossos parceiros publicitários para criar um perfil de seus interesses e exibir anúncios relevantes em outros sites.