CPE520
Descatalogado5GHz 300Mbps 16dBi Outdoor CPE
- Built-in 16dBi 2x2 dual-polarized directional MIMO antenna
- Adjustable transmission power from 0 to 27dBm/500mw
- System-level optimizations for more than 20km long range wireless transmission
- TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications
- Centralized Management System – Pharos Control
- AP / Client / Bridge / Repeater / AP Router / AP Client Router (WISP) operation modes
- Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely
Point-to-Multi-Point Connections
TP-LINK’s 5GHz 300Mbps 16dBi Outdoor CPE, the CPE520 is dedicated to cost effective solutions for outdoor wireless networking applications. With its centralized management application, it is flexible and ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications. Professional performance, coupled with user-friendly design, makes CPE520 an ideal choice for both business and home users.
Enterprise Hardware
With Qualcomm Atheros enterprise level chipsets, high gain antennas and high quality material, specially designed enclosure, and PoE power supply, CPE520 is specially designed for outdoor use and can operate flawlessly in almost any climate, with operating temperatures ranging from -40℃ (-40℉) to +70 ℃ (158℉).
Qualcomm Atheros enterprise 560MHz CPU
High power Tx and high sensitivity Rx radio front-end design
Advanced Antenna System
Built-in High Gain Dual-Polarized Antenna
Dedicated metal reflector ensures higher gain
and lower noise interference
V-Pol Co-polarization Pattern
H-Pol Co-polarization Pattern
20km+ Wireless Data Transmission
Specially designed for outdoor uses, ideal for long distance wireless data transmission over 20km+, tested in the field.
20km+
TP-LINK MAXtream TDMA Technology
As network scale increases, wireless competition and collisions among CPEs and base stations will be
so enormous that the real throughput of the network will drop, resulting in a serious impact on end-user
experience. To mitigate these effects, the CPE520 uses MAXtream TDMA Technology.
Pharos Control – Centralized Management System
CPE520 also comes equipped with centralized management software that helps users easily manage all the devices in their network from a single PC - Pharos Control. Functions like device discovery, status monitoring, firmware upgrading, and network maintenance can be managed using Pharos Control.
PharOS
User-friendly web-based management system allows professionals to do more specific configurations.
5GHz 300Mbps 16dBi Outdoor CPE CPE520
Built-in 16dBi Dual-polarized
Directional Antenna
AP / Client / Bridge / Repeater / AP Router /
AP Client Router (WISP) operation modes
6KV Lightning Protection
Weather Proof Enclosure
15KV ESD Protection
Passive PoE Adapter
CPE520 | CPE510 | CPE220 | CPE210 | TL-WA7210N | |
---|---|---|---|---|---|
Wireless Performance | |||||
Wireless Speed | 5GHz 300Mbps | 5GHz 300Mbps | 2.4GHz 300Mbps | 2.4GHz 300Mbps | 2.4GHz 150Mbps |
Transmit Power | 27dBm | 23dBm | 30dBm | 27dBm | 27dBm |
Antenna | 16dBi | 13dBi | 12dBi | 9dBi | 12dBi |
MIMO | √ | √ | √ | √ | - |
Coverage Range | 20km+ | 15km+ | 13km+ | 5km+ | 5km+ |
Hardware | |||||
Compatibility | 802.11a/n | 802.11a/n | 802.11b/g/n | 802.11b/g/n | 802.11b/g/n |
External Antenna Interface | - | - | - | - | 1 * RP-SMA |
Weatherproof Enclosure | √(IPX5) | √(IPX5) | √(IPX5) | √(IPX5) | √ |
Dual Ethernet Ports | √ | √ | √ | √ | - |
PoE Passthrough | √ | √ | √ | √ | - |
Grounding Terminal | √ | √ | √ | √ | √ |
Lightning Protection over Ethernet Cable |
√ | √ | √ | √ | - |
ESD Protection | 15kV | 15kV | 15kV | 15kV | 15kV |
Lightning Protection | 6kV | 6kV | 6kV | 6kV | 4kV |
Power Supply | 24V Passive PoE Adapter |
24V Passive PoE Adapter |
24V Passive PoE Adapter |
24V Passive PoE Adapter |
12V Power Adapter + Passive PoE Injector |
Software | |||||
Operation Modes | AP / Client / Bridge / Repeater / AP Client Router (WISP Client) / AP Router Mode | ||||
Channel Bandwidth | 5/10/20/40MHz | 5/10/20/40MHz | 5/10/20/40MHz | 5/10/20/40MHz | 20/40MHz |
Transmit Power Control | Stepping 1dBm | Stepping 1dBm | Stepping 1dBm | Stepping 1dBm | Stepping 3dBm |
MAXtream TDMA Mode | √ | √ | √ | √ | - |
Throughtput Monitors | √ | √ | √ | √ | - |
Spectrum Analyzer | √ | √ | √ | √ | - |
Iperf Speed Test Tool | √ | √ | √ | √ | - |
Pharos Control Supported (Central Network Management Application) |
√ | √ | √ | √ | - |
Soluciones relacionadas
-
Wireless Networking for Elevators
TP-Link offers wireless point to point link delivering up to 300 Mbps throughput. The point to point link provides wireless coverage to the entire shaft, and delivers network to the elevator car, connecting the surveillance cameras or digital signage. So that real time video can be recorded to a DVR without hard wiring coax cable directly from the camera to the recorder.
- Easy, Flexible Installation
- Stable Connections at High-Speeds
- Ideal for Elevator Camera
- No Complex Cabling
- PoE Support
Casos relacionados
-
Peru WISP
TP-Link Helps WISP to Provide Reliable Wireless Connectivity in Peru
Peru WISP
TP-Link Helps WISP to Provide Reliable Wireless Connectivity in Peru
“The performance of CPE was better than expected, working stable even with -85 dBm of received power.” —David Grillo, Engineer, Kroton -
ADINET WISP in Indonesia
TP-Link Helps Local WISP Provide Long Distance Wireless Connectivity in Indonesia
ADINET WISP in Indonesia
TP-Link Helps Local WISP Provide Long Distance Wireless Connectivity in Indonesia
“Amazing! The performance of the Pharos Wireless Broadband Solution has exceeded even our wildest expectations.” —Bagus Prakoso, Owner of ADINET
CARACTERÍSTICAS DE HARDWARE | |
---|---|
Procesador | Qualcomm Atheros Enterprise 560MHz CPU, MIPS 74Kc |
Memoria | 64MB DDR2 RAM, 8MB Flash |
Interfaz | 1 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in)1 10/100Mbps Shielded Ethernet Port (LAN1)1 Grounding Terminal1 Reset Button |
Fuente de Alimentación | Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins) Voltage range: 16-27VDC |
Consumo de Potencia | 14 Watts Max Note: When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable. |
Dimensiones | 11×3.1×2.4 inch (276×79×60mm) |
Tipo de Antena | Built-in 16dBi 2x2 Dual-polarized Directional Antenna Beam Width: 45° (H-Plane) / 30° (E-Plane) Note: For more details, please refer to datasheet |
Protección | 15KV ESD Protection 6KV Lightning Protection |
Carcasa | Outdoor ASA stabilized plastic material IPX5 waterproof Certification |
CARACTERÍSTICAS INALÁMBRICAS | |
---|---|
Estándares Inalámbricos | IEEE 802.11a/n (with Pharos MAXtream disabled) |
Protocolo Propietario | TDMA Mode (with Pharos MAXtream enabled) |
Velocidad Inalámbrica | Up to 300Mbps (40MHz,Dynamic) Up to 144.4Mbps (20MHz,Dynamic) Up to 72.2Mbps (10MHz,Dynamic) Up to 36.1Mbps (5MHz,Dynamic) |
Frecuencia | 5.15~5.85GHz Note: Available operating frequency may vary depending on the limitations of the countries or regions in which the device is used. |
Potencia de Transmisión | 27dBm/500mw (Adjustable power by 1dBm) Note: Maximum transmission power may vary across different channels depending on the limitations of the countries or regions in which the device is used. |
CARACTERÍSTICAS DE SOFTWARE | |
---|---|
Configuraciones Inalámbricas | Pharos MAXtream TDMA Technology 802.11a/n Modes Selectable Channel Width: 5/10/20/40MHz Automatic Channel Selection Transmission Power Control Dynamic Frequency Selection (DFS) WDS Enable/Disable Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption SSID Broadcast Enable/Disable Multi-SSID with VLAN Tagging (AP mode only) Distance/ACK Timeout Setting Wireless MAC Address Filter Wireless Advanced: > Beacon Interval/RTS Threshold/Fragmentation >Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia |
Gestión | Discovery and Remote Management via Pharos Control application HTTP/HTTPS Web-based management System Log SNMP Agent(v2c) Ping Watch Dog Dynamic DDNS SSH Server |
Herramientas Del Sistema | Wireless Signal Quality Indicators: Signal Strength/Noise/Transmit CCQ/CPU/Memory Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP Spectrum Analyzer Speed Test Ping Traceroute |
Optimizaciones Nivel de Sistema | Optimized IGMP Snooping/Proxy for multicast applications Hardware watch dog |
CARACTERÍSTICAS ADAPTADOR POE | |
---|---|
Dimensiones(W*D*H) | • V1.0: 110×57×33.5 mm• V2.0: 85.8×43.9×29.7 mm |
Interfaces | 1 AC Jack with Earth Ground1 10/100Mbps Shielded Ethernet Port (Power + Data)1 10/100Mbps Shielded Ethernet Port (Data) |
Botón | Remote Reset Button |
LEDs de Estado Power | Green |
Entrada | 100-240VAC, 50/60Hz |
Salida | • V1.0: 24VDC, 1A Max• V2.0: 24VDC, 0.6A Max+4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet) |
Eficiencia | >80% |
Certificaciones | CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark |
Otros | |
---|---|
Certificaciones | CE, FCC, RoHS, IPX5 |
Contenido del Paquete | Outdoor Wireless CPE24V 0.6A Passive PoE AdapterPole Mounting StrapsAC Power CordInstallation Guide |
Requisitos del sistema | Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux. Note: We recommend you to use one of following Web browsers for an improved user experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended. |
Ambiente | Operating Temperature: -40℃~70℃ (-40℉~158℉)Storage Temperature: -40℃~70℃ (-40℉~158℉)Operating Humidity: 10%~90% non-condensingStorage Humidity: 5%~95% non-condensing |