Descarga para CPE510
Software de control
Pharos Control_2.0.0-1_Linux |
Descarga | |
---|---|---|
Fecha de Publicación: 2017-12-14 | Idioma: Inglés | Tamaño de Archivo: 47.68MB |
Sistema Operativo: Linux (Debian/Ubuntu) |
||
Modifications and Bug Fixes: 1. Use the B/S structure and inherit the functions of PharOS Control v1.2. Add the Google Map and some other new functions. Notes: 1. For PharOS CPE/WBS series wireless broadband products(including v1 devices). |
Setup Video
-
Video tutorial de instalación y configuración punto a punto de TP-Link CPE
-
How to Log into the CPE Management Page
This video demonstrates how to log into TP-Link Pharos CPE. The process consists of three steps:
• Connect the PoE adapter
• Assign a static IP address for the computer
• Log into the CPE
THIS VIDEO APPLIES TO:
• All TP-Link CPE models.
FIND US AND FOLLOW US:
Facebook: https://www.facebook.com/TPLINKUSA/
Twitter: https://twitter.com/tplinkna, @TPLINKNA
LinkedIn: https://www.linkedin.com/company/tp-link-technologies-co-ltd
Website: https://www.tp-link.com/support/
Community: https://community.tp-link.comMás Carpeta
Preguntas Frecuentes
- ¿Por qué mis dispositivos no detectan el SSID de CPE/WBS en modo AP?
- Instrucciones antes de instalar los productos para exteriores Pharos (CPE/WBS)
- ¿Cómo elegir productos Pharos para Wi-Fi exterior?
- Cómo restaurar los productos de la serie Pharos de TP-Link a los valores predeterminados de fábrica
- Breve introducción del modo de prueba
- Cómo configurar el valor de distancia en los productos Pharos
- Cómo configurar la VLAN de administración en los productos de la serie Pharos
- Breve introducción del aislamiento de AP
- ¿Cómo seleccionar el modo de funcionamiento de los productos de la serie Pharos?
- How to adjust orientation of outdoor AP for better signal coverage
- ¿Cómo puedo configurar con éxito la topología AP + Cliente?
- Cómo solucionar problemas del CPE en modo AP y Cliente cuando la velocidad inalámbrica es lenta
- ¿Por qué no puedo acceder a la página web de gestión del CPE?
- How to build a Wireless Broadband Network for Remote Village using tp-link products
- How to build a Network for LAN-LAN Wireless Connection using tp-link products
- Cómo construir una red inalámbrica entre el hogar y la granja usando productos tp-link
- Cómo utilizar Iperf para probar la velocidad en CPE exterior en una red PtP
- PoE Guide to TP-Link Access Points
- What should I do if I got a certificate error?
- What if my TP-Link Outdoor Access Points fails to connect to the Ubiquiti access point?
- Pharos MAXtream introduction
- Cómo utilizar la recuperación de firmware en los productos Pharos
- Cómo utilizar los CPE para crear un túnel LAG (Agregación de enlaces)
- Cómo configurar el modo de punto de acceso en el dispositivo Pharos
- Cómo iniciar sesión en la página de administración web de Pharos-Series
- Cómo configurar el modo cliente en el dispositivo Pharos
- How to Configure the AP Router Mode on the Pharos device
- How to Configure the Bridge Mode on the Pharos device
- How to Configure the Repeater Mode on the Pharos device
- How to Configure the AP Client Router Mode on the Pharos device
- How to Configure Multi-SSID on the Pharos device
- How to Upgrade the Firmware of Pharos Series Product
- Long distance wireless connection concerns when using outdoor access point
- Brief introduction of DFS function
Firmware
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty.
Cómo encontrar la versión de hardware en un dispositivo de TP-Link - Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
CPE510(UN)_v3.0_20171228 |
Descarga | |
---|---|---|
Fecha de Publicación: 2018-01-26 | Idioma: Inglés | Tamaño de Archivo: 4.98 MB |
Modifications and Bug Fixes: Modifications and Bug Fixes: Notes: Note: |
To Use Third Party Firmware In TP-Link Products
Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.
Emulators
Versión de firmware |
Modo en Uso |
Idioma |
|
---|---|---|---|
170609. |
- |
Inglés |
Nota:
1. El emulador es una GUI web virtual donde puede experimentar el panel de administración de productos TP-Link.
2. Es posible que los emuladores enumerados no tengan el firmware más reciente.
3. Las funciones que se muestran son para referencia y su disponibilidad puede depender de las regulaciones locales. Para obtener más información, consulte la hoja de datos o la página del producto.
Q&A
Feature Configuration Guide
- Common Applications for Pharos Products
- Using the System Tools (CPE and WBS)
- Quick Start Guide (CPE and WBS)
- Monitoring the Network ( CPE and WBS)
- Managing the device (CPE and WBS)
- Introduction to Operation Modes (CPE and WBS)
- Configuring the System (CPE and WBS)
- Configuring the Network (CPE and WBS)
- Configuring the Wireless Parameters (CPE and WBS)