Descarga para OC200 V1

IMPORTANTE : La disponibilidad de modelos y versiones de hardware varía según la región. Consulta el sitio web regional de TP-Link para determinar la disponibilidad del producto.
Manual

Utilidad de descubrimiento de Omada

Omada Discovery Utility_v2.0.0_Mac

Descarga
Fecha de Publicación: 2018-07-24 Idioma: Inglés Tamaño de Archivo: 84.16 MB
Sistema Operativo: Mac OS X 10.7/10.8/10.9/10.10/10.11

New Feature/Enhancement:
1. Change name to "Omada Discovery Utility".
2. Update background picture during installation.
3. Limit the maximum length of controller hostname to 79.
 
Bug Fixed:
Fix the bug that searching in the search box will cause the software to hang.
 
Note:
Operating System: Mac OS X 10.7/10.8/10.9/10.10/10.11.

Setup Video

  • Cómo configurar toda la red de puertas de enlace, conmutadores y EAP mediante el controlador Omada SDN

    Este video demostrará cómo realizar una configuración completa con los productos TP-Link Omada, que incluyen puertas de enlace, conmutadores y EAP. Como ejemplo, vamos a construir las redes alámbricas e inalámbricas desde cero en nuestra oficina de TP-Link. La configuración consta de 7 pasos: Paso 1. Iniciar sesión en el controlador Paso 2. Adoptar dispositivos Paso 3. Ver panel y menús Paso 4. Configurar WAN Paso 5. Configurar LAN y VLAN Paso 6. Configurar Wi-Fi Paso 7. Configurar ACL

    Más Carpeta
  • How to configure Omada Hardware Controller via Omada App

    This videos shows how you to set up the Omada Hardware Controller (OC200 is used as an example) via Omada app locally and remotely.

    Más Carpeta
  • How to configure Omada Hardware Controller via a Web Browser

    This videos shows how you to set up the Omada Hardware Controller (OC200 is used as an example) via a web browser locally and remotely.

    Más Carpeta
  • How to Choose an Omada SDN Controller

    This video will show you how to choose an Omada SDN Controller and its management interface.

    Más Carpeta
  • How to setup the Omada Hardware Controller (OC200/OC300) via web browser

    This video will demonstrate how to set up OC200/OC300 via web browser. The setup consists of four steps: • Connect the controller to your local network. • Log in with your TP-Link ID. • Add the controller to your TP-Link ID. • Set up the controller THIS VIDEO APPLIES TO: • All TP-Link EAP models (except EAP120 and EAP220) • Omada Hardware Controller (OC200/OC300) • Mass EAPs (usually more than three)

    Más Carpeta
  • How to setup the Omada Hardware Controller (OC200/OC300) via your mobile phone

    This video will demonstrate how to set up OC200/OC300 via your mobile phone. The setup consists of four steps: • Connect the controller to your local network. • Log in with your TP-Link ID. • Add the controller to your TP-Link ID. • Set up the controller THIS VIDEO APPLIES TO: • All TP-Link EAP models (except EAP120 and EAP220) • Omada Hardware Controller (OC200/OC300) • Mass EAPs (usually more than three)

    Más Carpeta
  • A Quick Overview of EAP Management Methods

    This video introduces how to choose the optimum method to manage TP-Link EAPs in your scenario.
    Here are 3 most common scenarios and their corresponding methods:
    • Manage 1 or 2 EAPs locally
    • Manage 3 or more EAPs locally
    • Manage 3 or more EAPs remotely
    When choosing the method, consider the following questions:
    1. Standalone Mode or Controller Mode?
    2. In Controller mode, what kind of controller will you use, an OC200 or a PC with Omada Software Controller?
    3. What kind of user interface will you use, a web browser or the Omada app?

    Más Carpeta

Preguntas Frecuentes

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

  • Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
  • Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. 
    Cómo encontrar la versión de hardware en un dispositivo de TP-Link
  • Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
  • To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
  • It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
  • Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

OC200(UN)_V1_1.8.0 Build 20210406

Descarga
Fecha de Publicación: 2021-04-28 Idioma: Inglés Tamaño de Archivo: 120MB

Build-in Omada SDN Controller v4.3.5

If you are planning to upgrade from the old controller(v3.2.14 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

Some new functions of the Controller require device firmware support, and the supporting firmware for routers and switches will be released soon.

OC200(UN)_V1_1.0.3 Build 20181016

Descarga
Fecha de Publicación: 2018-11-08 Idioma: Inglés Tamaño de Archivo: 108.89MB

OC200(UN)_V1_1.0.1 Build 20180803

Descarga
Fecha de Publicación: 2018-08-22 Idioma: Inglés Tamaño de Archivo: 108.91MB

Bundle Omada Controller 3.0.2, click HERE for Controller release notes.

To Use Third Party Firmware In TP-Link Products

Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.

Open Source Code For Programmers (GPL)

Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.

You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.

The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.

GPL Code

Emulators

Versión de firmware
Modo en Uso
Idioma
Omada Controller 3.0
-
Inglés

Nota:

1. El emulador es una GUI web virtual donde puede experimentar el panel de administración de productos TP-Link.

2. Es posible que los emuladores enumerados no tengan el firmware más reciente.

3. Las funciones que se muestran son para referencia y su disponibilidad puede depender de las regulaciones locales. Para obtener más información, consulte la hoja de datos o la página del producto.

De United States?

Obtener productos, eventos y servicios para su región.