How to fill the water tank for the Robot Vacuum
26589 Before You Start
• Fill with cool/room temperature water only. Be careful not to wet the metal contacts.
• Use only cleaning agents specified by Tapo. Others may corrode the water tank.
1. Take out the dustbin and water tank.
2. Remove the rubber plug and add water to the water tank.
3. Re-install the dustbin and water tank.
1. Take out the dustbin and water tank.
2. Remove the rubber plug and add water to the water tank.
3. Re-install the dustbin and water tank.
1. Take out the dustbin and water tank.
2. Remove the rubber plug and add water to the water tank.
3. Re-install the dustbin and water tank.
1. Take out the dustbin and water tank.
2. Remove the rubber plug and add water to the water tank.
3. Re-install the dustbin and water tank.
1. Take out the dustbin and water tank.
2. Remove the rubber plug and add water to the water tank.
Note: To prevent corrosion, do NOT add any cleaning agents. Only use cool or room temperature water and be careful not to wet the metal contacts.
3. Wipe the water tank with a clean, dry cloth.
4. Re-install the dustbin and water tank.
1. Take out the dustbin and water tank.
2. Remove the rubber plug and add water to the water tank.
Note: To prevent corrosion, do NOT add any cleaning agents. Only use cool or room temperature water and be careful not to wet the metal contacts.
3. Wipe the water tank with a clean, dry cloth.
4. Re-install the dustbin and water tank.
¿Es útil esta pregunta frecuente?
Sus comentarios nos ayudan a mejorar este sitio.
