Descarga para TL-SG2210MP
1.0_normal_1594869351357s.png)
Switch Smart Gigabit JetStream de 10 puertos con 8 puertos PoE +Setup Video
-
How to Set Up the Whole Network of Gateway, Switches, and EAPs Using Omada SDN Controller
This video will demonstration how to do a full configuration with TP-Link Omada products including gateway, switches and EAPs. As an example, we are going to build the wired and wireless networks from scratch at our TP-Link Office. The setup consists of 7 steps: Step 1. Log in to the Controller Step 2. Adopt Devices Step 3. View Dashboard and Menus Step 4. Set up WAN Step 5. Set up LAN and VLANs Step 6. Set up Wi-Fi Step 7. Set up ACL
More Fold -
How to Adopt Omada Devices via Omada Controller
This video will show you how to adopt Omada devices and configure a gateway network via the Omada SDN Controller (Omada Software Controller is used as an example).
More Fold -
How to add devices with Zero-Touch Provisioning (ZTP) via Could-Based Controller
This video will show you How to add devices with Zero-Touch Provisioning (ZTP) via Could-Based Controller.
More Fold -
How to Monitor and Manage Devices via Omada SDN Controller
This video will show you how to monitor and manage devices via Omada SDN Controller.
More Fold -
How to Configure Schedules to Automate Network Control via Omada SDN Controller
This video shows how to configure WLAN Schedule, Port Schedule (PoE Schedule, Port Schedule), Upgrade Schedule, and Reboot Schedule to help you easily manage your network using the Omada Software Controller for demonstration.
More Fold -
How to Monitor and Manage Clients via Omada SDN Controller
This video will show you how to monitor and manage clients via Omada SDN Controller.
More Fold -
How to Check the Clients Signal Strength and Estimate the Actual Speed
This video will show you how to check the client signal strength and estimate actual network speeds.
More Fold -
How to Create User Accounts on Omada SDN Controller
This video shows how to create custom roles, local user accounts and cloud user accounts of different levels on the Omada SDN Controller.
More Fold
Preguntas Frecuentes
- Troubleshooting multicast video issues on Omada switches
- How to configure Switch Port Mirroring on Omada Controller
- How to configure 802.1Q VLAN on Smart and Managed switches using the new GUI
- How to configure IGMP Snooping for IPTV network on L2 Managed switches using the new GUI
- Troubleshooting guide for TACACS+ Authentication Fails on Omada Switch
- Troubleshooting guide for ARP Learning Failure
- How to configure Storm Control on Omada Switch via Omada Controller
- How to configure Class of Service (CoS) through Omada Controller
- Troubleshooting for abnormal SNMP interactions on Omada switch
- How to configure Jumbo Frame on Omada Controller
- Suggested configurations for AVoIP protocols on Omada Switches
- How to configure MLD Snooping on Omada Switches
- How to configure Auto-VoIP on Omada Switches via Omada Controller
- Troubleshooting of Layer 2 Multicast Failure
- How to configure IGMP Snooping on Omada switches for hotel IPTV scenario
- How to configure 802.1X VLAN Assignment on Omada Controller
- Recommended ACL configuration on Omada Switch for common scenarios
- How to configure AAA to assign different privileges for radius users to login on Omada Switch
- ¿Cuál es la diferencia entre la cuenta de administrador maestro, administrador y espectador en Omada Controller?
- Cómo usar la herramienta Ping en la aplicación Omada
- What should I do when the Omada Software Controller (V4) fails to discover the devices?
- Getting started without an Omada Controller
- How to configure Management VLANs for Omada Switches and APs (for SOHO scenario)
- How to configure Management VLANs for Omada Switches and APs (for Business scenario)
- How to configure Voice VLAN on Omada Switches using Omada Controller
- How to configure 802.1Q VLAN on Omada Switches when used with a third-party router
- What should I do if my switch has no Internet access?
- What should I do if my Internet from switch is unstable?
- How to setup Switch as DHCP server on Omada Controller
- How to configure DHCP Auto Install to let switch get configuration file and image from TFTP server
- How to configure Optical Line Terminal (OLT) and Omada Switch with XM60A
- How to configure LAG (LACP) on Omada Switches via Omada Controller
- How to configure VLAN Interfaces and Static Routes on Omada Switches
- Troubleshooting for Voice VLAN and Auto VoIP
- Troubleshooting for 802.1X (Dot1X) Authentication Fails on Omada Switch
- Troubleshooting for RADIUS Authentication Failure
- What to do if devices in the same VLAN fail to communicate with each other when connected to TP-Link switch
- What to do if Omada Device Adoption Failure
- Best practice to prevent network loops with Omada SDN solution
- Using Omada controller to configure multiple SSIDs with different VLANs on TP-Link Omada EAPs and Switches to work with a non-Omada gateway(Multi-Net NAT supported)
- What should I do if I cannot start the Omada Controller in windows system (Controller 4.1.5 or above)
- How to Configure Management VLAN on TP-Link Smart and Managed Switches Using the New GUI
- How to Manage Omada Devices at Different Sites Using Omada SDN Controller via Port Forwarding (Controller 5.0 or Above)
- How to Manage Omada Devices at Different Sites Using Omada SDN Controller via VPN (Controller 5.0 or Above)
- Qué es 2FA y cómo usarlo en la plataforma Omada
- Typical CLI Configuration Examples for TP-Link JetStream Switch
- How to check and modify VLANs on a TP-Link JetStream switch via SNMP
- How to achieve AAA Authentication through TACACS + server on the switch
Apps
- Omada APP
TP-Link Omada lets you configure settings, monitor network status and manage clients, all from the convenience of a smart phone or tablet. Learn more about Compatible Devices.
Note: SDN switch/router is compatible with Omada App only in controller mode. To use Omada, please update your device's firmware to the latest version.