Stáhnout pro T2600G-28MPS V3

Prosím zvolte si hardwarovou verzi:

>Jak zjisti hardwarovou verzi vašeho TP-Link zařízení?

Modely a hardwarové verze se liší v závisloti na regionu. Prosím ujistěte se o detailech pokud zvažujete nákup.

Product Overview

T2600G-28MPS(UN)_V3_Datasheet

Dokument

Gigabitový switch JetStream s 24 porty, Smart PoE a 4 SFP sloty
T2600G-28MPS

MIBs Files

T2600G-28MPS(UN)_V3_MIB_20180301		Stáhnout
Datum vydání: 2018-03-14	Jazyk: Angličtina	Velikost souboru: 200.26 KB
Operační systém: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux

802.1X Client

TP-LINK_802.1X_Client_Software		Stáhnout
Datum vydání: 2017-09-05	Jazyk: Angličtina	Velikost souboru: 5.5MB
Operační systém: Win2000/XP/2003/Vista/7/8/8.1/10

Driver

TP-LINK_USB_Console_Driver		Stáhnout
Datum vydání: 2019-03-13	Jazyk: Angličtina	Velikost souboru: 3.10 MB
Operační systém: Win2000/XP/2003/Vista/7/8/8.1/10
Notes: For TP-LINK switches with USB Console port

FAQ

How to configure MSTP on L2 Managed switches using the new GUI 10-29-202462506
How to configure STP/RSTP on L2 Managed switches using the new GUI 10-29-202479951
How to configure 802.1Q VLAN on Smart and Managed switches using the new GUI 10-29-2024160411
How to configure DHCP Interface Relay on L2 Managed switches using the new GUI 10-29-202480982
How to configure IGMP Snooping for IPTV network on L2 Managed switches using the new GUI 10-29-2024172693
Troubleshooting Instruction of TP-Link switch’s SFP port 07-23-202484803
The difference between the Voice VLAN feature and Auto VOIP feature 07-23-202478975
How to configure DHCP VLAN Relay on L2 Managed switches using the new GUI 07-23-2024144714
What should I do if I cannot access the web management page of my TP-Link switch? 07-23-2024345006
Do you still have any doubt about the effect of QoS on the Switch of TP-Link? 07-23-202488463
Jak lze přistupovat k řízenému přepínači L2 prostřednictvím konzolového portu? 10-08-2011360714
How to build up a multi-nets network via Multi-Nets NAT feature on TP-Link router with L2+/L3 switches 06-28-2022322475
How to configure Getting Time from NTP Server on TP-Link Smart & Managed Switch 06-28-2022226974
How to configure the DHCP Relay in TP-Link Switch 06-27-2022254691
How to configure the default gateway of the smart and L2 managed switches using the new GUI 06-27-2022161652
How to configure Voice VLAN to optimize the transmission of voice traffic on TP-Link Smart and Managed Switches using the new GUI 06-27-2022109979
How to configure backup image when upgrading a firmware on TP-Link Smart/Managed Switches using the new GUI 06-27-202258509
How to configure VLAN VPN on L2 Managed switches using the new GUI 06-27-202265161
How to configure Access Control to block users' access to the switch using the new GUI 06-27-202270126
How to configure Port Isolation on Smart and L2 Managed Switches using the new GUI 06-27-202261460
How to configure 802.1Q VLAN for LAG ports on Smart and Managed switches using the new GUI 06-27-202289241
Why are some functions lost after I log in to the switch? 07-20-202148644
How to configure MAC ACL on Smart and L2 Managed switches using the new GUI 06-06-201859577
How to configure OpenSSH 7.0(and above) to login smart and managed switches? 04-17-2018132417
The nodes that TP-Link T1600/T2600 series switch use to display the CPU and Memory utilization through SNMP 12-26-201668083

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty.
Jak zjisti hardwarovou verzi vašeho TP-Link zařízení?
Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

T2600G-28MPS(UN)_V3_20181101		Stáhnout
Datum vydání: 2018-12-11	Jazyk: Angličtina	Velikost souboru: 10.90 MB
Modifications and Bug Fixes: 1. Enhanced the MVR function. 2. Add the CLI command of "switchport general allowed vlan all/no switchport general allowed vlan all". 3. Support EtherLike-Mib. 4. Fix the bug that the IP in circuit-ID is wrong when the VLANs which the port belong to does not set up interface and PPPoE IP insertion is IP mode. 5. Fix the bug that NTP server will be changed when set up only one NTP server and fail to get the time. 6. Fix the bug that cannot set up auto mode for fiber ports which in portchannel. 7. Fix the bug that access control entries will not take effect when two or more entries are added for port binding. Notes: 1. For T2600G-28MPS(UN) V3.0. 2. If your device's Hardware Version is 2.0, after upgrading to this firmware, the old configuration will be lost.

T2600G-28MPS(UN)_V3_20180301		Stáhnout
Datum vydání: 2018-03-14	Jazyk: Angličtina	Velikost souboru: 10.88 MB
Modifications and Bug Fixes First firmware released Notes 1. For T2600G-28MPS(UN) V3.0 2. If your device's Hardwaer Version is 2.0, after upgrading to this firmware, the old configuration will be lost.

To Use Third Party Firmware In TP-Link Products

Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.

Open Source Code For Programmers (GPL)

Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.

You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.

The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.

Emulátory

Verze firmwaru	Working Mode	Jazyk
180301(UN)	-	Angličtina	Prohlížet

Poznámka:

1. Emulátor je virtuální webové grafické uživatelské rozhraní, ve kterém lze programovat firmware produktů TP-Link. Podrobnosti o vlastnostech a technických údajích jednotlivých produktů získáte prostřednictvím funkce vyhledávání a na stránkách produktů.

2. Ověřte, zda verze firmwaru souhlasí s verzí zobrazenou v rozhraní emulátoru. Každá verze firmwaru má vlastní grafické uživatelské rozhraní a funkčnost.

3. Mějte na paměti, že v emulátoru nejsou zastoupeny všechny verze firmwaru.

Q&A

Feature Configuration Guide

From United States?

Get products, events and services for your region.

HLEDAT Other Option