How to Configure the Repeater Mode on the TL-MR3020 and TL-MR3040
User Application Requirement
Updated 05-25-2016 05:51:47 AM
158684
158684 This Article Applies to:
Definition:The TL-MR3020/MR3040 copies and reinforces the existing wireless signal to extend the coverage of the signal. So the network name(SSID) and password don't change. This mode is especially useful for a large space to eliminate signal-blind corners.
Application: Large house,office,warehouse or other spaces where the existing signal is weak.
Access web interface
Run Quick Setup
Go to Quick Setup-> Click Next
Select Repeater-> Click Next
Select the Region,click Survey
Locate your router network name under the SSID column -> Click Connect
Security Settings: (Please match Security Settings with your existing router)
Please refer to Original Equipment Manufacturer for details
Password: (Please match Security Password with your existing router)
Click: Next
Click Reboot, and wait until it goes to 100% percent.
Relocate the TL-MR3020/TL-MR3040
You may now relocate the TL-MR3020/TL-MR3040 to a centralized location in order to make the most of Repeater Mode.
Congratulations! Your wireless signal has been enhanced.
Computer Setup Reversion
After the configuration, we need change the TCP/IP settings back on the computer.
If it doesn't work, please feel free to contact us(support@tp-link.com).
Get to know more details of each function and configuration please go to Download Center to download the manual of your product.
Byla tato FAQ užitečná?
Vaše zpětná vazba nám pomůže zlepšit naše webové stránky