CPE210

2.4GHz 300Mbps 9dBi Outdoor CPE

  • Built-in 9dBi 2x2 dual-polarized directional MIMO antenna
  • Adjustable transmission power from 0 to 25dBm/500mw
  • System-level optimizations for more than 5km long range wireless transmission
  • TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications
  • Centralized Management System – Pharos Control
  • AP / Client / AP Router / AP Client Router (WISP) operation modes
  • Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely

Learn more about Pharos Control >

Learn more about Pharos Long-Range Outdoor Wireless Broadband>​

Learn more about Omada Outdoor WiFi Solution>​

 

2.4GHz 300Mbps 9dBi Outdoor CPE

 

TP-Link’s 2.4GHz 300Mbps 9dBi Outdoor CPE, the CPE210 is dedicated to cost effective solutions for outdoor wireless networking applications. With its centralized management application, it is flexible and ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications.  Professional performance, coupled with user-friendly design, makes CPE210 an ideal choice for both business and home users.

Enterprise Hardware

With Qualcomm Atheros level chipsets, high gain antennas and high
quality material, specially designed enclosure, and PoE power supply, CPE210 is
specially designed for outdoor use and can operate flawlessly in almost any climate,
with operating temperatures ranging from -40℃ (-40℉) to +70℃ (158℉).

Qualcomm Atheros 650MHz CPU

High power Tx and high sensitivity Rx radio front-end design

Advanced Antenna System

  • Built-in High Gain Dual-Polarized Antenna
  • Dedicated metal reflector ensures higher gain
    and lower noise interference

Horizontal Elevation

Horizontal Azimuth

Vertical Elevation

Vertical Azimuth

5km+ Wireless Data Transmission

Specially designed for outdoor uses, ideal for long distance wireless data transmission over 5km+, tested in the field.

5km+

TP-Link MAXtream TDMA Technology

As network scale increases, wireless competition and collisions among CPEs and base stations will be
so enormous that the real throughput of the network will drop, resulting in a serious impact on end-user
experience. To mitigate these effects, the CPE210 uses MAXtream TDMA Technology.

Total Throughput*

MAXtream TDMA Mode

802.11 CSMA Mode

Real throughput depends on the actual application environment.

Quantity of Clients

Pharos Control – Centralized Management System

CPE210 also comes equipped with centralized management software that helps users easily
manage all the devices in their network from a single PC - Pharos Control. Functions like device discovery,
status monitoring, firmware upgrading, and network maintenance can be managed using Pharos Control.

PharOS

User-friendly web-based
management system allows
professionals to do more specific
configurations.

Emulator

2.4GHz 300Mbps 9dBi Outdoor CPE CPE210

  • AP / Client / AP Router /
    AP Client Router (WISP) operation modes
  • Weather Proof Enclosure
  • Passive PoE Adapter
  • Built-in 9dBi Dual-polarized
    Directional Antenna
  • 6kV Lightning Protection
  • 15kV ESD Protection
   CPE510  CPE220  CPE210
Wireless Performance      
Wireless Speed 5GHz 300Mbps 2.4GHz 300Mbps 2.4GHz 300Mbps
Transmit Power 23dBm 30dBm 27dBm
Antenna 13dBi 12dBi 9dBi
MIMO
Coverage Range 15km+ 13km+ 5km+
Hardware      
Compatibility 802.11a/n 802.11b/g/n 802.11b/g/n
Weatherproof Enclosure √(IPX5) √(IPX5) √(IPX5)
Dual Ethernet Ports - -
Grounding Terminal
ESD Protection 15kV 15kV 15kV
Lightning Protection 6kV 6kV 6kV
Power Supply 24V Passive PoE
Adapter
24V Passive PoE
Adapter
24V Passive PoE
Adapter
Software      
Operation Modes AP / Client / AP Client Router (WISP Client) / AP Router Mode
Channel Bandwidth 5/10/20/40MHz 5/10/20/40MHz 5/10/20/40MHz
Transmit Power Control Stepping 1dBm Stepping 1dBm Stepping 1dBm
MAXtream TDMA Mode
Throughtput Monitors
Spectrum Analyzer
Iperf Speed Test Tool
Pharos Control Supported
(Central Network Management Application)
HARDWARE-FUNKTIONEN
Prozessor Qualcomm Atheros 560MHz CPU, MIPS 74Kc
Speicher 64MB DDR2 RAM, 8MB Flash
Schnittstelle 1 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in)
1 Grounding Terminal
1 Reset Button
Spannungsversorgung Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins)
Voltage range: 16-27VDC
Energieverbrauch 5 Watts Max
Note: When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable.
Abmessungen (B*T*H) 224 x 79 x 60 mm
Antennentyp Built-in 9dBi 2x2 Dual-polarized Directional Antenna
Beam Width: 65° (H-Plane) / 40° (E-Plane)
Note: For more details, please refer to datasheet
Schutz 15KV ESD Protection
6KV Lightning Protection
Abdeckung Outdoor ASA stabilized plastic material
IPX5 waterproof Certification
WLAN-FUNKTIONEN
WLAN-Standards IEEE 802.11b/g/n (with Pharos MAXtream disabled)
Proprietäres Protokoll TDMA Mode (with Pharos MAXtream enabled)
WLAN-Geschwindigkeiten Up to 300Mbps (40MHz,Dynamic)
Up to 144.4Mbps (20MHz,Dynamic)
Up to 72.2Mbps (10MHz,Dynamic)
Up to 36.1Mbps (5MHz,Dynamic)
Frequenz 2.4~2.483GHz
Note: Available operating frequency may vary depending on the limitations of the countries or regions in which the device is used.
Sendeleistung 25dBm/316mw (Adjustable power by 1dBm)
Note: Maximum transmission power may vary across different channels depending on the limitations of the countries or regions in which the device is used.
SOFTWARE-FUNKTIONEN
WLAN-Konfiguration Pharos MAXtream TDMA Technology
802.11b/g/n Modes
Selectable Channel Width: 5/10/20/40MHz
Automatic Channel Selection
Transmission Power Control
Dynamic Frequency Selection (DFS)
WDS Enable/Disable
Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption
SSID Broadcast Enable/Disable
Multi-SSID with VLAN Tagging (AP mode only)
Distance/ACK Timeout Setting
Wireless MAC Address Filter
Wireless Advanced:
> Beacon Interval/RTS Threshold/Fragmentation
>Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia
Verwaltung Discovery and Remote Management via Pharos Control application
HTTP/HTTPS Web-based management
System Log
SNMP Agent(v2c)
Ping Watch Dog
Dynamic DDNS
SSH Server
Systemtools Wireless Signal Quality Indicators:
Signal Strength/Noise/Transmit CCQ/CPU/Memory
Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP
Spectrum Analyzer
Speed Test
Ping
Traceroute
Optimierungen auf Systemebene Optimized IGMP Snooping/Proxy for multicast applications
Hardware watch dog
FUNKTIONEN VON POE-ADAPTERN
Abmessungen (B*T*H) 85.8×43.9×29.7 mm
Schnittstellen 1 AC Jack with Earth Ground
1 10/100Mbps Shielded Ethernet Port (Power + Data)
1 10/100Mbps Shielded Ethernet Port (Data)
Taste Remote Reset Button
Power-Status-LEDs Green
Eingang 100-240VAC, 50/60Hz
Ausgang • V2.0: 24VDC, 0.6A Max
• V3.0: 24VDC, 0.5A Max
• V3.20: 24VDC, 0.25A Max

+4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet)
Effizienz >80%
Zertifizierungen CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark
SONSTIGES
Zertifizierung CE, FCC, RoHS, IPX5
Verpackungsinhalt Outdoor Wireless CPE
24V 0.25A Passive PoE Adapter
Pole Mounting Straps
AC Power Cord
Installation Guide
Systemanforderungen Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux.
Note: We recommend you to use one of following Web browsers for an improved user experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended.
Umgebung Operating Temperature: -40℃~70℃ (-40℉~158℉)
Storage Temperature: -40℃~70℃ (-40℉~158℉)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~95% non-condensing

*Maximum wireless transmission rates are the physical rates derived from IEEE Standard 802.11 specifications. Range and coverage specifications along with the number of connected devices were defined according to test results under normal usage conditions. Actual wireless transmission rate, wireless coverage, and number of connected devices are not guaranteed, and will vary as a result of 1) environmental factors, including building materials, physical objects and obstacles, 2) network conditions, including local interference, volume and density of traffic, product location, network complexity, and network overhead and 3) client limitations, including rated performance, location, connection quality, and client condition.
*Protection against lightning and electro-static discharge may be achieved through proper product setup, grounding and cable shielding. Refer to the instruction manual and consult an IT professional to assist with setting up this product.
*Power supply distances are based on test results under normal usage conditions. Actual power supply distance will vary as a result of 1) AP status, including transmit power, connected devices and network traffic, 2) cable properties, including type and texture and 3) environmental factors, which include temperature and humidity.

Von United States?

Erhalten Sie Produkte, Events und Leistungen speziell für Ihre Region