Download for SG3210
Vx.0=Vx.6/Vx.8/Vx.9(eg:V1.0=V1.6/V1.8/V1.9)
Vx.x0=Vx.x6/Vx.x8/Vx.x9 (eg:V1.20=V1.26/V1.28/V1.29)
Vx.30=Vx.32/Vx.33 (eg:V3.30=V3.32/V3.33)
- Manual
Controller Software
|
Omada_SDN_Controller_v5.13.30.8_linux_x64.deb |
Download | |
|---|---|---|
| Published Date: 2024-02-27 | Language: Multi-language | File Size: 189.79 MB |
Operating System: Ubuntu 16.04/18.04/20.04/22.04, Debian 8/9/10 |
||
|
As this version optimizes the WAN/LAN port configuration of Omada Gateway, it will cause some WAN ports to be enabled by default and cannot be disabled. This may result in changes to the load balance configuration, you can make the changes manually. |
||
|
Omada_SDN_Controller_v5.13.30.8_linux_x64.tar.gz |
Download | |
|---|---|---|
| Published Date: 2024-02-27 | Language: Multi-language | File Size: 202.04 MB |
Operating System: Ubuntu 16.04/18.04/20.04/22.04, Debian 8/9/10 |
||
|
As this version optimizes the WAN/LAN port configuration of Omada Gateway, it will cause some WAN ports to be enabled by default and cannot be disabled. This may result in changes to the load balance configuration, you can make the changes manually. |
||
Setup Video
FAQs
- How do I know the type of my Omada switch?
- What should I do if I forget my Omada switch’s login username or password?
- How to configure Voice VLAN on Omada Switches using Omada Controller
- Troubleshooting for Voice VLAN and Auto VoIP
- How to Configure Management VLAN on TP-Link Smart and Managed Switches Using the New GUI
- Troubleshooting multicast video issues on Omada switches
- How to configure Switch Port Mirroring on Omada Controller
- How to configure 802.1Q VLAN on Smart and Managed switches using the new GUI
- How to configure LACP on our Smart/ Managed Switch
- How to configure IGMP Snooping for IPTV network on L2 Managed switches using the new GUI
- Troubleshooting guide for ARP Learning Failure
- How to configure Storm Control on Omada Switch via Omada Controller
- How to configure Class of Service (CoS) through Omada Controller
- How to configure Jumbo Frame on Omada Controller
- Troubleshooting Guide: Failing to detect OAM link fault
- Suggested configurations for AVoIP protocols on Omada Switches
- How to configure Auto-VoIP on Omada Switches via Omada Controller
- How to configure LLDP & LLDP-MED on Omada Switches via Omada Controller
- Troubleshooting of Layer 2 Multicast Failure
- How to configure TACACS+ Authentication on switches via Omada Controller
- How to configure IGMP Snooping on Omada switches for hotel IPTV scenario
- How to configure 802.1X VLAN Assignment on Omada Controller
- Recommended ACL configuration on Omada Switch for common scenarios
- What is the Console Cable and the line sequence of it?
- How to configure AAA to assign different privileges for radius users to login on Omada Switch
- What's the difference between Master Administrator, Administrator and Viewer account in Omada Controller?
- How to use the Ping tool in Omada APP
- What should I do when the Omada Software Controller (V4) fails to discover the devices?
- Do you still have any doubt about the effect of QoS on the Switch of TP-Link?
- Getting started without an Omada Controller
- How to configure Management VLANs for Omada Switches and APs (for SOHO scenario)
- How to configure Management VLANs for Omada Switches and APs (for Business scenario)
- What should I do if my switch has no Internet access?
- What should I do if my Internet from switch is unstable?
- How to configure DHCP Auto Install to let switch get configuration file and image from TFTP server
- How to build an 802.1X access authentication system using Switches on Omada Controller
- How to block an illegal client with Certain IP address from getting access to the network using TP-Link Managed Switches
- What are the differences in features and application scenarios among various serial switches?
- How to configure Optical Line Terminal (OLT) and Omada Switch with XM60A
- How to configure LAG (LACP) on Omada Switches via Omada Controller
- What to do if devices in the same VLAN fail to communicate with each other when connected to TP-Link switch
- Best practice to prevent network loops with Omada SDN solution
- How to enter the BootUtil Menu to factory reset the switch with the console cable
- How to configure switch as DHCP server on Standalone mode
- Using Omada controller to configure multiple SSIDs with different VLANs on TP-Link Omada EAPs and Switches to work with a non-Omada gateway(Multi-Net NAT supported)
- How to Manage Omada Devices at Different Sites Using Omada SDN Controller via Port Forwarding (Controller 5.0 or Above)
- How to Manage Omada Devices at Different Sites Using Omada SDN Controller via VPN (Controller 5.0 or Above)
- What is 2FA and how to use it in Omada platform
- Typical CLI Configuration Examples for TP-Link JetStream Switch
- How to access TP-Link JetStream Managed Switch via the Console port
- How to configure 802.1Q VLAN on L2 Managed switches using the old GUI
- How to reset JetSteam (TM) series switches to factory default by using Hyper Terminal
- How to configure port security function
- How to Configure Port Isolation Function on Our Layer 2 Manage switches through Web Browser
- How to Configure Port Mirror on TP-Link Smart Switches and L2 Managed Switches
- How to test the Jumbo Frame pass-through feature on TP-Link switches
- How to configure RSTP on TP-Link switches using the old GUI
- How to change the IP address of the smart and managed switches using the old GUI and CLI
- How to configure MAC ACL on Smart/Managed switch
- How to manage the switch with Mac via Micro USB cable
- How to check and modify VLANs on a TP-Link JetStream switch via SNMP
- How to achieve AAA Authentication through TACACS + server on the switch
- How to configure Extended IP ACL
Firmware
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （ Normally V1.x=V1）
It is NOT suggested to upgrade firmware which is not for your region. Please click here to choose your own region and download the most suitable firmware version. ( eg. the firmware of EU and US are different hardware versions) - Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- Do NOT upgrade the firmware through wireless connection unless the TP-Link device only has wireless connection.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
SG3210(UN)_V3.26_3.20.1 Build 20240115 |
Download | |
|---|---|---|
| Published Date: 2024-03-08 | Language: English | File Size: 10.23 MB |
|
Bug Fixed: Notes: |
||
|
SG3210(UN)_V3.26_3.20.0 Build 20230818 |
Download | |
|---|---|---|
| Published Date: 2023-12-27 | Language: English | File Size: 11.17 MB |
|
This firmware is fully adapted to Omada SDN Controller v5.9 and above. Notes: |
||
To Use Third Party Firmware In TP-Link Products
Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.
Open Source Code For Programmers (GPL)
Please note: The products of TP-LINK partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence termshere. You receive the GPL source codes of the respective software used in TP-LINK products for direct download and further information, including a list of TP-LINK software that contain GPL software code under GPL Code Center.
The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.
Apps
- Omada APP
TP-Link Omada lets you configure settings, monitor network status and manage clients, all from the convenience of a smart phone or tablet. Learn more about Compatible Devices.
Note: SDN switch/router is compatible with Omada App only in controller mode. To use Omada, please update your device's firmware to the latest version.