Download for T1500G-8T | TP-Link Denmark

MIBs Files

T1500G-8T(UN)_V2_MIB_20180416

Download

Published Date: 2018-10-29

Language: English

File Size: 199.67 KB

Operating System: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux

802.1X Client

TP-LINK_802.1X_Client_Software

Download

Published Date: 2017-09-05

Language: English

File Size: 5.5MB

Operating System: Win2000/XP/2003/Vista/7/8/8.1/10

FAQs

How to configure MSTP on L2 Managed switches using the new GUI 10-29-202464396
How to configure STP/RSTP on L2 Managed switches using the new GUI 10-29-202482318
How to configure 802.1Q VLAN on Smart and Managed switches using the new GUI 10-29-2024165230
How to configure LACP on our Smart/ Managed Switch 10-29-2024238491
How to configure IGMP Snooping for IPTV network on L2 Managed switches using the new GUI 10-29-2024176492
Why the firmware version does not change after upgrading in T Series switches? 08-09-202463380
How to configure the default gateway of the smart and managed switches using the old GUI 08-09-2024261183
What is the function we can configure when the switch is managed by Omada SDN Controller? 07-23-202468954
The difference between the Voice VLAN feature and Auto VOIP feature 07-23-202481032
What should I do if I cannot access the web management page of my TP-Link switch? 07-23-2024352987
Do you still have any doubt about the effect of QoS on the Switch of TP-Link? 07-23-202490139
How to block an illegal client with Certain IP address from getting access to the network using TP-Link Managed Switches 07-01-202479949
What are the differences in features and application scenarios among various serial switches? 07-01-2024232215
How to Setup TP-Link AP’s Multi-SSID (VLAN) to Work with TP-Link Switch 06-29-2022574455
How to Configure Port Isolation Function on Our Layer 2 Manage switches through Web Browser 06-29-2022129765
How to Configure Port Mirror on TP-Link Smart Switches and L2 Managed Switches 06-29-202283648
How to configure 802.1q VLAN on Smart Switches 06-29-2022149295
How to configure Getting Time from NTP Server on TP-Link Smart & Managed Switch 06-28-2022230373
How to configure RSTP on TP-Link switches using the old GUI 06-28-2022110821
How to change the IP address of the smart and managed switches using the old GUI and CLI 06-28-2022329293
How to configure MAC ACL on Smart/Managed switch 06-28-202286036
How to change the IP address of the smart and L2 managed switches using the new GUI and CLI 06-27-2022184666
How to configure the default gateway of the smart and L2 managed switches using the new GUI 06-27-2022166126
How to configure Voice VLAN to optimize the transmission of voice traffic on TP-Link Smart and Managed Switches using the new GUI 06-27-2022112050
How to configure backup image when upgrading a firmware on TP-Link Smart/Managed Switches using the new GUI 06-27-202259984
How to configure Access Control to block users' access to the switch using the new GUI 06-27-202271838
How to configure Port Isolation on Smart and L2 Managed Switches using the new GUI 06-27-202263300
How to configure 802.1Q VLAN for LAG ports on Smart and Managed switches using the new GUI 06-27-202291010
How to achieve AAA Authentication through TACACS + server on the switch 11-22-202160815
Why are some functions lost after I log in to the switch? 07-20-202149819
How to configure MAC ACL on Smart and L2 Managed switches using the new GUI 06-06-201861132
How to configure OpenSSH 7.0(and above) to login smart and managed switches? 04-17-2018134851

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （ Normally V1.x=V1）
It is NOT suggested to upgrade firmware which is not for your region. Please click here to choose your own region and download the most suitable firmware version. ( eg. the firmware of EU and US are different hardware versions)
Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
Do NOT upgrade the firmware through wireless connection unless the TP-Link device only has wireless connection.
It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

T1500G-8T(UN)-V2-20200109

Download

Published Date: 2020-04-20

Language: English

File Size: 9.10 MB

New Features/Enhancements:
1. Add the feature that needs to change the password when login for the first time.
2. Add the feature that can choose not to change the IP address when resetting the switch.
3. Add "service reset-disable" for removing reset option from Bootutil.
4. Add built-in Telnet client which allows the switch can telnet other devices.
5. Allow disabling HTTP and HTTPS for access types at the same time.
6. Optimize the password character set to support more special characters.
7. Optimize the BPDU Filter feature to make ports not send out BPDU packets when BPDU Filter is enabled.
8. Optimized the CLI display of MVR configurations.
9. Support to display MVR members of inactive and active groups.
10. Support to view/clear mac-address table on port/VLAN.
11. Support to fill in file name with folder path when using SNMP or CLI to upgrade firmware or restore config file through TFTP.
Notes:
1. For T1500G-8T(UN) V2.0
2. Your device's configuration will not be lost after upgrading, which means you don't need to configure your device again after upgrading.

3. After upgrading, it cannot downgrade to the old version firmware because of the encryption rule has changed.

T1500G-8T(UN)_v2_190509

Download

Published Date: 2019-07-25

Language: English

File Size: 8.81 MB

Modifications and Bug Fixes:
1. Enhanced the MVR function.
2. Support TLS 1.2.
3. Fix the bug that NTP server will be changed when set up only one NTP server and fail to get the time.
4. Fix the bug that cannot set up auto mode for fiber ports which in portchannel.
5. Fix the bug that access control entries will not take effect when two or more entries are added for port binding.

Notes:
1. For T1500G-8T(UN) 2.0.
2. If your device's Hardware Version is 1.0, after upgrading to this firmware, the old configuration will be lost.

To Use Third Party Firmware In TP-Link Products

Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.

Open Source Code For Programmers (GPL)

Please note: The products of TP-LINK partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.

You can review, print and download the respective GPL licence termshere. You receive the GPL source codes of the respective software used in TP-LINK products for direct download and further information, including a list of TP-LINK software that contain GPL software code under GPL Code Center.

The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.

Download for T1500G-8T V2

MIBs Files

802.1X Client

FAQs

Firmware

To Upgrade

To Use Third Party Firmware In TP-Link Products

Open Source Code For Programmers (GPL)

Q&A

Feature Configuration Guide