Download for T2600G-28TS
Vx.0=Vx.6/Vx.8/Vx.9(eg:V1.0=V1.6/V1.8V1.9)
Vx.x0=Vx.x6/Vx.x8/Vx.x9 (eg:V1.20=V1.26/V1.28/1.29)
Vx.30=Vx.32/Vx.33 (eg:V3.30=V3.32/V3.33)
- Product Overview
JetStream 24-Port Gigabit L2 Managed Switch with 4 SFP SlotsMIBs Files
|
T2600G-28TS(UN)_V1_MIB_160412 |
Download | |
|---|---|---|
| Published Date: 2016-04-12 | Language: English | File Size: 181 KB |
Operating System: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux |
||
|
Notes: For T2600G-28TS(UN)_v1 |
||
|
T2600G-28TS_V1_MIB_151216 |
Download | |
|---|---|---|
| Published Date: 2015-12-16 | Language: English | File Size: 175 KB |
Operating System: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux |
||
|
Notes: For T2600G-28TS_V1. |
||
|
T2600G-28TS_V1_MIBs_150604 |
Download | |
|---|---|---|
| Published Date: 2015-10-14 | Language: English | File Size: 144 KB |
Operating System: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux |
||
|
Notes: For T2600G-28TS_V1_150604 |
||
802.1X Client
|
TP-LINK_802.1X_Client_Software |
Download | |
|---|---|---|
| Published Date: 2017-09-05 | Language: English | File Size: 5.5MB |
Operating System: Win2000/XP/2003/Vista/7/8/8.1/10 |
||
|
|
||
Driver
|
TP-LINK_USB_Console_Driver |
Download | |
|---|---|---|
| Published Date: 2019-03-13 | Language: English | File Size: 3.10 MB |
Operating System: Win2000/XP/2003/Vista/7/8/8.1/10 |
||
|
Notes: For TP-LINK switches with USB Console port |
||
|
TP-LINK_USB_Console_Driver |
Download | |
|---|---|---|
| Published Date: 2016-06-16 | Language: English | File Size: 3.02 MB |
Operating System: Win2000/XP/2003/Vista/7/8/8.1/10/ |
||
|
Notes: USB Console Driver for TP-LINK Managed Switch with USB Console port. |
||
FAQs
- How to configure LACP on our Smart/ Managed Switch
- How to Block Unknown Devices to Access the Switch by Using IP Source Guard
- Why the firmware version does not change after upgrading in T Series switches?
- How to configure the default gateway of the smart and managed switches using the old GUI
- What is the Console Cable and the line sequence of it?
- How to build a Campus Network using TP-LINK products
- The difference between the Voice VLAN feature and Auto VOIP feature
- What should I do if I cannot access the web management page of my TP-Link switch?
- Do you still have any doubt about the effect of QoS on the Switch of TP-Link?
- How to block an illegal client with Certain IP address from getting access to the network using TP-Link Managed Switches
- How to access TP-Link JetStream Managed Switch via the Console port
- How to configure 802.1Q VLAN on L2 Managed switches using the old GUI
- How to Configure Port Isolation Function on Our Layer 2 Manage switches through Web Browser
- How to limit the port rate of the incoming traffic via ACL function
- How to test the Jumbo Frame pass-through feature on TP-Link switches
- How to build up a multi-nets network via Multi-Nets NAT feature on TP-Link router with L2+/L3 switches
- How to change the IP address of the smart and managed switches using the old GUI and CLI
- How to configure MAC ACL on Smart/Managed switch
- How to configure the DHCP Relay in TP-Link Switch
- How to configure Voice VLAN to optimize the transmission of voice traffic on TP-Link Smart and Managed Switches using the new GUI
- How to configure OpenSSH 7.0(and above) to login smart and managed switches?
- The nodes that TP-Link T1600/T2600 series switch use to display the CPU and Memory utilization through SNMP
- How to configure Extended IP ACL
Firmware
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （ Normally V1.x=V1）
It is NOT suggested to upgrade firmware which is not for your region. Please click here to choose your own region and download the most suitable firmware version. ( eg. the firmware of EU and US are different hardware versions) - Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- Do NOT upgrade the firmware through wireless connection unless the TP-Link device only has wireless connection.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
T2600G-28TS_V1_151216 |
Download | |
|---|---|---|
| Published Date: 2015-12-16 | Language: English | File Size: 14.22 MB |
|
Modifications and Bug Fixes: New Features/Enhancement:1. IPv6 static routing, IPv6 ACL and DHCPv6 snooping are supported. 2. Added new features Serial Port Settings, Password Recovery and User Account Setting 3. New features L2PT, sFlow, OAM, VLAN VPN, DHCP relay, PPPoE Circuit ID are supported. 4. Enhanced ACL, Multicast, 802.1x. Notes: 1. For T2600G-28TS_V1.2. As many features have been enhanced, the configuration may be lost after upgrading, and it is not suggested to import the old config file to the device after upgrading. |
||
|
T2600G-28TS_V1_150604 |
Download | |
|---|---|---|
| Published Date: 2015-10-14 | Language: English | File Size: 14.00 MB |
|
Modifications and Bug Fixes: First firmware release of T2600G-28TS Notes: For T2600G-28TS V1 |
||
To Use Third Party Firmware In TP-Link Products
Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.
Open Source Code For Programmers (GPL)
Please note: The products of TP-LINK partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence termshere. You receive the GPL source codes of the respective software used in TP-LINK products for direct download and further information, including a list of TP-LINK software that contain GPL software code under GPL Code Center.
The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.
GPL Code
Emulators
Firmware Version |
Working Mode |
Language |
|
|---|---|---|---|
151216 |
- |
English |
Note:
1. The emulator is a virtual web GUI where you can experience the TP-Link product management panel.
2. The listed emulators might not have the latest firmware.
3. The features displayed are for reference, and their availability may depend on local regulations. For more information, please refer to the datasheet or product page.