How to configure 802.1Q tag VLAN on Web Smart Switch

User Application Requirement
Updated 06-29-2022 02:21:43 AM 131580
This Article Applies to: 

A Virtual Local Area Network (VLAN) is a network topology configured according to a logical scheme rather than the physical layout. Hosts in the same VLAN communicate with each other as if they are in a LAN. However, hosts in different VLANs cannot communicate with each other directly.

Now let´s learn how to configure the tag VLAN on Web Smart Switch by the following example:

Network Topology:

Here we take TL-SG2216WEB which has 16 ports as an example.

Switch A connects to Switch B with an Ethernet cable in port 1.Switch A connects to the Internet via TL-R480T in port 16.

The computers of Finance Dept. connect to port2-8 of switch A and port2-8 of switch B. The Sales Dept. connect to port 9-14 of switch A and port 9-14 of switch B.

Purpose:

1 The computers from Finance Dept. can communicate with each other.

2 The computers from Sales Dept. can communicate with each other.

3 The computers of Finance Dept. and Sales Dept. can´t communicate with each other.

4 Both the Finance Dept. and Sales Dept. can go to Internet through TL-R480T.

VLAN Configuration parameters:

To achieve the purpose, we configure 3 VLANs:VLAN2,VLAN3,VLAN4.

To achieve Purpose 1, we create the VLAN2 (VID=2):

Switch A:

Port:port1-8,16.

The egress frame of Port 1 is Add Tag, The rest are Drop Tag.

VIDs are 2 as default. PVIDs of Port 2-8 are 2

Switch B:

Port :port1-8

The egress frame of Port 1 is Add Tag, The rest are Drop Tag.

VIDs are 2 as default. PVIDs for Port 2-8 are 2

To achieve Purpose 2, we create the VLAN3(VID=3):

Switch A:

Port:port1,9-14,16

The egress frame of Port 1 is Add Tag, The rest are Drop Tag.

VIDs are 3 as default. PVIDs of Port 9-14 are 3.

Switch B:

Port :port1,9-14.

The egress frame of Port 1 is Add Tag, The rest are Drop Tag.

VIDs are 3 as default. PVIDs of Port 9-14 are 3.

In fact, we have already achieved the Purpose 3 by setting VLAN2 and VLAN3.

To achieve Purpose 4, we create the VLAN4(VID=4).PVID of Port 16 is 4.

Switch A:

Port:port1-14,16.

The egress frame of Port 1 is Add Tag, The rest are Drop Tag. VIDs are 4 as default.

Switch B:

Port :port1-14.

The egress frame of Port 1 is Add Tag, The rest are Drop Tag. VIDs are 4 as default.

Now ,let’s start to configure Switch A:

Part I:Defining VLAN Mode:

Please go to VLAN Setting->VLAN Mode to choose the Tag VLAN(802.1Q Tag VLAN).

Part II: Setting VLANs:

Please go to VLAN Setting->Tag VLAN Setting to set the parameters of VLAN.

The Tag VLAN Setting page contains a table that maps VLAN parameters to ports. A port becomes a member of a certain VLAN when it is ticked.

Step 1:Choose the VLAN 2.

Step 2:Tick the port which is assigned to VLAN 2.Then click submit.

Step 3:Set the parameters for VLAN 3 and VLAN 4.Don’t forget to submit.

Part III: Tag VLAN Global Setting

Please go to VLAN Setting->tag VLAN Global Setting to set the PVID parameters.

PVID assigns a VLAN ID to untagged packets. Please set the PVID for ports in the Tag VLAN Global Setting page.

Until now, we have finished the configuration for Switch A.

Configure Switch B

Please configure Switch B in the same way. Here is a screen shot of Tag VLAN Global Setting of Switch B.

Now, the network will work as described in Purpose.

Is this faq useful?

Your feedback helps improve this site.

Recommend Products

Community

TP-Link Community

Still need help? Search for answers, ask questions, and get help from TP-Link experts and other users around the world.

Visit the Community >

From United States?

Get products, events and services for your region.