Contents

Objective

Requirements

Introduction

What is AFC?

How does AFC Work?

Why is AFC necessary for Wi-Fi 6E / Wi-Fi7?

Which Countries/Regions require AFC?

What Frequency Bands Require AFC Coordination?

Which Omada APs support AFC?

Configuration

Configuration for Controller Management

Configuration for Standalone Management

Conclusion

Related Articles

Objective

This article briefly introduces the basic concepts of AFC, technical implementation, and compliance with Omada AP products. It gives a detailed description of how to configure AFC under both Controller management and Standalone management.

Requirements

• Omada 6GHz Wi-Fi 7 AP

• Omada Controller (Software Controller / Hardware Controller / CBC, v5.15.20 or above)

Introduction

What is AFC?

AFC (Automated Frequency Coordination) is a spectrum management system designed to enable the safe coexistence of unlicensed devices and incumbent users in the 6GHz frequency band. It is a critical regulatory mechanism that allows Wi-Fi 6E and Wi-Fi 7 devices to operate at a higher power level while preventing harmful interference with licensed services, such as fixed microwave links, satellite communications, and radio astronomy.

How does AFC Work?

• Device Query: The access point determines its geolocation (via GPS or other means) and device parameters to the AFC system.

• Spectrum Availability Computation: The AFC system cross-references the device’s location with a database of incumbent services (e.g., fixed microwave links, satellite stations) and calculates available channels and maximum allowable transmit power, ensuring compliance with regulatory constraints.

• Authorization Response: The AFC system provides the device with a list of approved frequencies and power levels for operation.

• Periodic Revalidation: Devices periodically re-query the AFC system to accommodate changes in incumbent spectrum usage.

Why is AFC necessary for Wi-Fi 6E / Wi-Fi7?

• Prevention of Interference with Incumbent Users: The 6GHz band has been historically used by licensed incumbent services, including fixed microwave links, satellite communications, and public safety networks. Without AFC, uncontrolled transmissions from newly licensed devices could cause harmful interference, disrupting critical operations such as emergency response, broadcasting, and telecommunications.

• Enabling Standard Power Wi-Fi in Outdoor and High-Power Environments: Unlike low-power indoor devices, which can operate without AFC but are restricted to indoor environments and low power levels, standard power Wi-Fi APs require AFC to ensure safe coexistence with incumbent users. AFC allows higher-power Wi-Fi deployments in outdoor and enterprise settings, essential for applications like campus-wide connectivity, industrial automation, and smart city infrastructure.

• Maximizing Spectrum Utilization: The 6 GHz band is a significant, underutilized spectrum resource for Wi-Fi expansion. AFC allows dynamic and efficient frequency allocation, ensuring unlicensed devices can use available spectrum without unnecessary restrictions while avoiding occupied frequencies. This results in better spectrum efficiency and higher overall network capacity.

Which Countries/Regions require AFC?

Regulatory bodies such as the FCC (Federal Communications Commission) in the United States and ISED (Innovation, Science and Economic Development) in Canada require AFC systems for standard power Wi-Fi devices operating in the 6GHz band. Other regions are also exploring similar frameworks to optimize spectrum usage while safeguarding incumbent services.

What Frequency Bands Require AFC Coordination?

The United States and Canada have similar AFC implementations, covering the UNII-5 (5945-6425 MHz) band and the UNII-7 (6525-6875 MHz) band for Standard Power 6GHz Wi-Fi. More countries/regions are expected to adopt AFC as demand for high-power Wi-Fi 6E and Wi-Fi 7 increases, but it is not yet finalized and is still a work in progress.

Which Omada APs support AFC?

Currently, only EAP772-Outdoor supports AFC; all the other 6GHz Wi-Fi7 models will support it in the future. (The support plan may be fine-tuned; please pay attention to the firmware’s release note, which will introduce the specific changes.)

Configuration

This article will elaborate on configuring AFC under both stand-alone and controller management, using the EAP772-Outdoor, Omada's first tri-band Outdoor AP supporting AFC, as a case in point.

Configuration for Controller Management

Step 1. Log in to Omada Controller and go to the Site’s Devices page, click the target AP to open its property window, then go to Config > Radios to enable AFC and tick the Apply button. Then, the AFC feature will adjust the transmission power of the 6GHz band according to your geographic location to meet regulatory requirements.

Note: With AFC disabled, the Outdoor AP will stop to work in the 6GHz band. The other models’ 6GHz radio will operate in Low Power mode.

Step 2. Then, you can go to the Details > AFC to check the configuration results.

• AFC Status: The current status of AFC is “Active,” which means that the last query was successful and that the AP successfully applied the power meter; “Inactive” means that the query is wrong, which may be due to the abnormality of the AFC server or the fluctuation of the local network, etc.

• Expiration Time: The expiration time of the last query result. When it reaches this date, the AFC module will make a new query.

• Last Response: Was the previous query successfully received with the data returned by the AFC server?

• Last Response Time: the date and time when the previous query was successful.

Configuration for Standalone Management

Step 1. Open a browser on your PC or mobile phone and access the AP’s GUI by entering its IP address. Then, go to Wireless > Wireless Settings > 6GHz to enable AFC.

Conclusion

The above is the entire Introduction and configurations of the AFC feature; please configure it according to your needs.

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.