How to configure Access Control on Archer C50/C20/A5 (new logo)

Access Control is used to deny or allow specific client devices to access your network with access time and content restrictions.

I want to: Deny or allow specific client devices to access my network with access time and content restrictions.

For example, if you want to forbid host with MAC address 00-11-22-33-44-AA on the LAN to access www.microsoft.com, while allow all the other computers to access the internet freely all the time, please follow the steps below:

Here takes Archer C20_V4 as demonstration:

1. Log in the router’s management interface. If you don’t know how to do that, please refer to How do I log into the web-based Utility (Management Page) of TP-Link wireless router?

2. Go to Access Control > Host and configure the host settings:

1) Click Add New.

2) Select MAC Address as the mode type. Create a unique description (e.g. host_1) for the host in the Description field and enter 00-11-22-33-44-AA in the MAC Address filed.

3) Click Save.

3. Go to Access Control > Target and configure the target settings:

1) Click Add New.

2) Select URL Address as the mode type. Create a unique description (e.g. target_1) for the target in the Target Description field and enter the domain name, either the full name or the keywords (for example microsoft) in the Add URL Address field.

Note: Any URL address with keywords in it (e.g. www.microsoft.com) will be blocked or allowed.

3) Click Save.

4. Go to Access Control > Schedule and configure the schedule settings:

1) Click Add New.

2) Create a unique description (e.g. schedule_1) for the schedule in the Schedule Description field and set the day(s) and time period.

3) Click Save.

5. Go to Access Control > Rule and add a new access control rule.

1) Click Add New.

2) Give a name for the rule in the Description field. Select host_1 from the LAN host drop-down list; select target_1 from the target drop-down list; select schedule_1 from the schedule drop-down list.

3) Select Deny as Rule.

4) Leave the status as Enabled and click Save.

6. Select Enable Internet Access Control to enable Access Control function.

7. Select Allow the packets not specified by any filtering rules to passthrough this device as the default filter policy and click Save.

Now the specific host(s) cannot visit the target(s) within the scheduled time period while other websites will still be accessible and other hosts will not be affected.

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.