Download for Festa F65
Vx.0=Vx.6/Vx.8/Vx.9(eg:V1.0=V1.6/V1.8V1.9)
Vx.x0=Vx.x6/Vx.x8/Vx.x9 (eg:V1.20=V1.26/V1.28/1.29)
Vx.30=Vx.32/Vx.33 (eg:V3.30=V3.32/V3.33)
- Product Overview
- Manual
-
- Indoor&Outdoor&Wall&Extender AP(EU1_12 Languages)
- Indoor&Outdoor&Wall&Extender AP(America_4 Languages)
- Indoor&Outdoor&Wall&Extender AP(Middle-East-Africa_2 Languages)
- Indoor&Outdoor&Wall&Extender AP(EU2_16 Languages)
- Indoor&Outdoor&Wall&Extender AP(Asia-Pacific_7 Languages)
- SSH Commands Guide for EAPs
- Festa Cloud-Based Controller_User Guide
- Festa F65_V1_Installation Guide
- Festa AP_Ceiling Mount_Regulatory Compliance
- Ceiling Mount AP(EU1_12 Languages)_Installation Guide
- Ceiling Mount AP(EU2_16 Languages)_Installation Guide
- Ceiling Mount AP(Asia-Pacific_7 Languages)_Installation Guide
AX3000 Ceiling Mount WiFi 6 Access PointSetup Video
FAQs
- How to troubleshoot Festa access points in the Standalone mode
- Getting started with Festa Cloud-Based Controller
- Festa device adoption guidance
- Troubleshooting: AP goes offline abnormally
- Troubleshooting guide of common wireless issues
- Why my clients don't roam or connect to the nearest AP
- Troubleshooting for Wireless Client Cannot Access the Internet
- Unable to connect to EAP WiFi
Firmware
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty.
How to find the hardware version on a TP-Link device - Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
Festa F65(EU)_V1_1.0.2 Build 20240428 |
Download | |
|---|---|---|
| Published Date: 2024-07-02 | Language: English | File Size: 11.72 MB |
|
Recommended Controller Software Version: Festa Controller v1.0.0 or above
New Features/Enhancements: 1. Added an anti-brute-force mechanism when logging in through the app 2. Improved stability
Bug Fixed: 1. Fixed the issue that the number of IPv6 addresses of clients connected to the Mesh AP was displayed incorrectly 2. Fixed the issue that the channel jumped abnormally after a radar signal was detected 3. Fixed the issue that the client could obtain the IP address of the default vlan when the MAC address authentication was not passed 4. Fixed the issue that the client could not access the web interface of the device after passing the portal authentication 5. Fixed the issue that in the dynamic VLAN + Portal authentication scenario, if the client does not authenticate for a period of time after connecting, the Portal page cannot be popped up normally |
||
|
Festa F65(EU)_V1_1.0.1 Build 20240313 |
Download | |
|---|---|---|
| Published Date: 2024-03-27 | Language: English | File Size: 11.57 MB |
|
Recommended Controller Software Version: Festa Controller v1.0.0 or above
Bug Fixed: 1. Fixed the bug of memory leak when using IPv6 dialup. |
||
To Use Third Party Firmware In TP-Link Products
Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.
Apps
- Festa
GPL Code
Emulators
Firmware Version |
Working Mode |
Language |
|
|---|---|---|---|
20240319 |
- |
English |
Note:
1. The emulator is a virtual web GUI where you can experience the TP-Link product management panel.
2. The listed emulators might not have the latest firmware.
3. The features displayed are for reference, and their availability may depend on local regulations. For more information, please refer to the datasheet or product page.