Download for TL-SG2424 V2

Feature Filter: All User Application RequirementTroubleshootingConfiguration Guide

FAQs

• How to configure LACP on our Smart/ Managed Switch 10-29-2024235167
• How to configure IGMP Snooping for IPTV network using L2 switch 08-09-2024223533
• What should I do if my switch has no Internet access? 07-08-202422324
• What should I do if my Internet from switch is unstable? 07-08-202416254
• How to block an illegal client with Certain IP address from getting access to the network using TP-Link Managed Switches 07-01-202478739
• What are the differences in features and application scenarios among various serial switches? 07-01-2024229221
• Typical CLI Configuration Examples for TP-Link JetStream Switch 12-13-2022106844
• How to configure 802.1Q tag VLAN on Web Smart Switch 06-29-2022131028
• How to Setup TP-Link AP’s Multi-SSID (VLAN) to Work with TP-Link Switch 06-29-2022568404
• How to Configure Port Isolation Function on Our Layer 2 Manage switches through Web Browser 06-29-2022127681
• How to Configure Port Mirror on TP-Link Smart Switches and L2 Managed Switches 06-29-202282227
• How to configure 802.1q VLAN on Smart Switches 06-29-2022147732
• How to test the Jumbo Frame pass-through feature on TP-Link switches 06-28-2022184592
• How to configure RSTP on TP-Link switches using the old GUI 06-28-2022109478
• How to change the IP address of the smart and managed switches using the old GUI and CLI 06-28-2022325620
• How to configure MAC ACL on Smart/Managed switch 06-28-202284590

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

• Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
• Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. 
  How to find the hardware version on a TP-Link device
• Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
• To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
• It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
• Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

To Use Third Party Firmware In TP-Link Products

Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.

Open Source Code For Programmers (GPL)

Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.

You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.

The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.

Emulators