Download for TL-WR802N
Vx.0=Vx.6/Vx.8/Vx.9(eg:V1.0=V1.6/V1.8/V1.9)
Vx.x0=Vx.x6/Vx.x8/Vx.x9 (eg:V1.20=V1.26/V1.28/V1.29)
Vx.30=Vx.32/Vx.33 (eg:V3.30=V3.32/V3.33)
- Product Overview
- Manual
Setup Video
-
How to Resolve Double NAT using Starlink
-
How to Configure a TP-Link Router with Starlink
-
What should I do if I cannot access the internet? - Using a DSL modem and a TP-Link router
If you can’t access the internet using a DSL modem and TP-Link router, this video can help you solve the problem.
More Fold -
What should I do if I cannot access the internet? - Using a cable modem and a TP-Link router
If you can’t access the internet using a cable modem and TP-Link router, follow this video step by step to solve your problem.
More Fold
FAQs
- How to share network on Tether App
- Brief introduction of Wireless Channel, Channel Width and DFS
- What if I forget my wireless password of TP-Link Wi-Fi router?
- How to setup TP-Link Wi-Fi Router on web management page
- How to choose right TP-Link product for your internet service
- Should I use Dynamic IP or PPPoE？
- How to setup TP-Link Wi-Fi Router with Singtel on web management page
- How to setup TP-Link Wi-Fi Router with Singtel on Tether App
- How to connect TP-Link router with Starlink
- What should I do if my internet connection is slow?
- What should I do if the LED of TP-Link router is abnormal?
- What should I do if wireless connection cannot work on TP-Link Wi-Fi router?
- How to Avoid Double NAT When DSL Modem Router and Wireless Router are Used Together
- Why My TP-Link Router Can Not Get WAN Parameters From My Modem?
- How to Setup DDNS(DynDNS) on Wireless Router
- How to Configure MAC Address Clone on TP-Link Mini Pocket Router
- How to Setup DDNS (No-IP) on TP-Link Wireless Router
- How to select the operating mode of TP-Link wireless multiple modes devices
- How to install TP-Link wireless router to work with a DSL Modem (PPPoE)
- How to choose the right working mode for the Nano pocket routers
- How to Configure the Wireless Router Mode on TL-WR802N/TL-WR810N
- How to Configure the AP Mode on the TL-WR802N/TL-WR810N
- How to Configure the Client Mode on TL-WR802N/TL-WR810N
- How to Configure the Range Extender/Repeater Mode on the TL-WR802N/TL-WR810N
- How to Configure the Hotspot Router Mode on the TL-WR802N
- What should I do if I can’t log into web-based interface of my TP-Link device?
- What should I do if I cannot find my wireless network or I cannot connect the wireless network ?
- Application Requirement/Choose WAN Connection Type on my TP-Link router
- How do I install TP-Link router to work with a Cable Modem? (Old UI)
- What should I do if my Nano or Travel router cannot work well?
- How do I use the WDS Bridging function to extend my wireless network?
- Why cannot I access the Internet after successfully connected to the TP-Link router’s wireless network(Windows OS)?
- Why my TP-Link Router gets a WAN IP from the modem but no internet access？
- Why cannot I access the Internet after successfully connected to the TP-Link router's wireless network(MAC OS)?
- How to configure Address Reservation on TP-Link wireless router
- Application Requirement/Internet Access Control
- How do I install a TP-Link router to work with a DSL modem (Dynamic IP)?
- How do I install TP-Link wireless router to work with a Modem (Static IP)?
- Application Requirement/ Parental Control
Firmware
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty.
How to find the hardware version on a TP-Link device - Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
TL-WR802N_V1_150717 |
Download | |
|---|---|---|
| Published Date: 2015-07-17 | Language: English | File Size: 3.39 MB |
|
Modifications and Bug Fixes: New Features/Enhancement： Notes: 1.For TL-WR802N 1.0 |
||
|
TL-WR802N_V1_150109 |
Download | |
|---|---|---|
| Published Date: 2015-01-09 | Language: English | File Size: 3.29 MB |
|
Modifications and Bug Fixes: The first firmware released. Notes: For TL-WR802N |
||
To Use Third Party Firmware In TP-Link Products
Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.
Apps
- TP-Link Tether
TP-Link Tether provides the easiest way to access and manage your network with your iOS or Android devices. Learn more about TP-Link Tether and Compatible Devices
Note: To use Tether, please update your TP-Link device's firmware to the latest version.
GPL Code
Emulators
Firmware Version |
Working Mode |
Language |
|
|---|---|---|---|
150109 |
- |
English |
Note:
1. The emulator is a virtual web GUI where you can experience the TP-Link product management panel.
2. The listed emulators might not have the latest firmware.
3. The features displayed are for reference, and their availability may depend on local regulations. For more information, please refer to the datasheet or product page.