The lighting rules of Gigabit GPON Terminal Products.
7998 Note: This Article Applies to:
- Archer XR500v
- TX-6610
- TX-W6961N
Example: Sample picture of Archer XR500v:
Example: Sample picture of TX- 6610
Example: Sample picture of TX- W6961N
Part I. LED lighting rules during power on start process
- All LED lights will come on in at the moment the power is turned on, and the LOS lights turned red, while the rest remained green for 0.5s. Then the Power light remain green and all the other lights go out.
- In the start-up process, the LOS light starts flashing red (bright 0.5s/ off 0.5s).
- The whole system is started and all LED lights are working normally.
Example: Sample LED lights picture of Archer XR500v
Part II. LED lighting rules after start-up
- Power LED:
• Single color(GREEN)
|
Status |
Description |
|
Green On |
Power on |
|
Off |
Power off |
- PON(GPON/EPON) LED:
• Single color(GREEN)
|
Status |
Description |
|
Green On |
The router is registered with the OLT |
|
Off |
The router is not yet registered with the OLT. |
|
Green Flashing |
The router is trying to register with the OLT. |
- LOS LED:
• Single color(RED)
|
Status |
Description |
|
Red On |
The router is unable to transmit optical signal. |
|
Off |
The router is receiving optical signal properly. |
|
Red Flashing |
No optical signal is received or the received signal is too weak. |
- Internet LED:
• Dual color(GREEN/RED)
|
Status |
Description |
|
Green On |
Internet connection on but no traffic |
|
Off |
No Internet connection or device is in Bridge mode |
|
Green Flashing |
Internet activity present (traffic in either direction) |
- WLAN(2.4GHz/5GHz) LED:
• Single color(GREEN)
|
Status |
Description |
|
Green On |
Wireless radio is enabled |
|
Off |
Wireless radio is disabled |
|
Green Flashing |
Wireless activity present (traffic in either direction) |
- WPS LED:
• Single color(GREEN)
|
Status |
Description |
|
Green On |
This may remain on for 5 minutes when a WPS connection is established, then turn off |
|
Off |
No WPS connection |
|
Green Flashing |
WPS connection is in progress. This may take up to 2 minutes |
- LAN(1\2\3\4) LED:
• Single color(GREEN)
|
Status |
Description |
|
Green On |
Powered device is connected to the associated port but no traffic |
|
Off |
No powered device is connected |
|
Green Flashing |
LAN activity present (traffic in either direction) |
- Phone LED:
• Single color(GREEN)
|
Status |
Description |
|
Green On |
The SIP account register successfully |
|
Off |
The SIP account does not register or registration failed. |
|
Green Flashing 2Hz, 50% duty cycle |
on-hook and there are voice messages |
|
Green Flashing 4Hz, 50% duty cycle |
One or more FXS ports are ringing |
- USB LED:
• Single color(GREEN)
|
Status |
Description |
|
Green On |
At least one USB external device has been connected and identified |
|
Off |
Both USB ports are not connected to external devices or cannot be recognized by external devices |
|
Green Flashing |
Identifying USB external devices |
Is this faq useful?
Your feedback helps improve this site.
TP-Link Community
Still need help? Search for answers, ask questions, and get help from TP-Link experts and other users around the world.