T1700G-28TQ
DescatalogadoSwitch Smart Apilable de 24 Puertos Gigabit JetStream con 4 Ranuras SFP+ 10GE
- Apilamiento físico que permite hasta 6 unidades y 40Gbps de ancho de banda bidireccional para alta escalabilidad y redundancia eficiente
- Puertos SFP+ 10G para apilamiento y/o uplink, que ofrece soporte para aplicaciones de alto ancho de banda evitando congestión y repartiendo datos de manera fluida
- Funcionalidades L2+, Enrutamiento Estático que ayuda al tráfico interno para mayor eficiencia de uso y recursos de red
- Funcionalidades de seguridad avanzada incluyendo Vinculación IP-MAC-Puerto, ACL, Seguridad por Puerto, Defensa DoS, Control de Tormentas, DHCP Snooping, Autenticación 802.1X y Radius
- Soporta IPv6 permitiendo apilamiento dual IPv4/IPv6, MLD snooping e IPv6 neighbor discovery
- Modos de gestión WEB/CLI, SNMP, RMON e Imagen Dual para mejorar la gestión
Solución de Switching Económica 10-Gigabit para SMBs en Crecimiento
Serie de Switches Smart 10G T1700
En un mundo de empresas en expansión y virtualización en crecimiento, los servicios y aplicaciones basados en cloud, como VoIP, streaming de vídeo HD y vigilancia IP, las redes SMB necesitan evolucionar más allá de la simple fiabilidad para proporcionar escalabilidad y ancho de banda mayor y rendimiento mejorado. La nueva Serie de Switches Smart 10G T1700 representa la solución ideal que reúne estas características. La serie incluye el Switch Smart 10-Gigabit T1700X-16TS y el Switch Smart Gigabit Apilable con 10G de Uplink T1700-28TQ, ambos proporcionan altos niveles de rendimiento, escalabilidad y económicos que requieren las SMBs en sus soluciones de red de 10G.
GIGABIT APILABLE
SMART SWITCH
Switch Smart Gigabit Apilable de 12 Puertos
Con 4 Ranuras SFP+ 10GE
Future-Proof
10GBase-T Technology
Until recently, 10-Gigabit connectivity was available only in the expensive fiber based technology that supports high-speed access to the network backbone or data center environment.
Today, 10GBase-T Technology is becoming more common and affordable. Low-Latency, Line-Rate 10G Copper Base-T is backward compatible with Fast Ethernet and Gigabit Ethernet and can automatically negotiate between higher and lower speed connections. Most importantly, 10GBase-T provides a cost-effective method for migrating from your current network to 10G Ethernet by utilizing your existing CAT5e/CAT6 RJ-45 short connections (up to 55m) and CAT6A/CAT7 connections (up to 100m). This reduces cabling complexity and ultimately results in significant savings for customers.
16 10-Gigabit Ports,
320Gbps Switching Capacity
The T1700X-16TS features 12 10GBase-T RJ45 ports and four dedicated SFP+ fiber slots, which can support up to 320Gbps of combined switching bandwidth. This provides great resiliency, relieves congestion associated with bandwidth-intensive applications, and guarantees smooth data transmission.
GIGABIT STACKABLE
WITH 10G UPLINK
24-Port Gigabit Stackable Smart Switch
with 4 10GE SFP+ Slots
Physical Stacking
With True Physical Stacking Technology, up to six T1700G-28TQ units can be stacked with a single IP address.
This provides enhanced scalability, simple management, and increased redundancy for high-density deployment. It also supports efficient network expansion in the future.
-
6 Units
True Physical Stacking Technology of up to six units supports network simplification
-
144 GE Ports
Up to 144 Gigabit Ethernet ports per stack
-
24 10G SFP+
Up to 24 10G SFP+ slots per stack
-
768 Gbps
Up to 768Gbps of switching capacity for aggregated networks
-
1 Management IP
With all units identified by a single IP address, configuring and monitoring the stack is easy
Fanless Design for Silent Operation
The T1700G-28TQ utilizes a fanless design, which reduces the amount of ambient noise in your office. Removing the fan also reduces power consumption and helps you build a more cost-effective network.
Software Features
-
L2+ Static Routing
Simple network segmentation, with internal routing through the switch, allows devices in different VLANs/subnets to communicate with each other and makes the flow of network traffic more efficient.
-
Abundant L2 Features
T1700 Series devices are equipped with a full lineup of L2 features that meet your current and future needs for unified networking and mobility.
802.1Q/MAC/Protocol/Private VLAN1
Link Aggregation Group (LAG)
IGMP & MLD Snooping
Multicast VLAN
-
Robust Security Strategies
Support for numerous security strategies allow you to create a secure, unified network by preventing unauthorized access, external attacks, and malware infiltration.
Access Control List (ACL)
DHCP Snooping
802.1x Authentication
IP-MAC-Port Binding
-
Comprehensive QoS Features
Advanced controls provide optimized network performance and efficient delivery of time-sensitive traffic.
Port-Based or 802.1p-Based Prioritization
Layer 3-Based (DSCP) Prioritization
Rate Limit
Voice VLAN
-
IPv6 Support
The T1700 Series offers comprehensive IPv6 features, including IPv6 management, Static Routing, ACL, and QoS2, which ease the transition to an IPv6-based network and protect the value of your investment.
-
Dual Image
Dual image firmware reduces downtime when the firmware is being updated. The backup image will also be activated in the event that any error occurs on the active image.
1 Only T1700X-16TS supports Private VLAN
2 IPv6 Static Routing/ACL/QoS will be supported in a future firmware release
Hardware Specifications
| T1700X-16TS | T1700G-28TQ | |
|---|---|---|
| 10/100/1000Mbps RJ45 Ports | - | 24 |
| 10GBase-T RJ45 Ports | 12 | - |
| Uplink | 4 Dedicated 10G SFP+ | 4 Dedicated 10G SFP+ |
| Switching Capacity | 320Gbps | 128Gbps |
| Dimensions(W×D×H) | 17.3×8.7×1.73 in. (440×220×44mm) |
17.3×7.1×1.73 in. (440×180×44mm) |
| Fan Quatity | Two Smart Fans | Fanless |
| Find More Details | Go> | Go> |
Accessories
-
10GBase-SR SFP+ LC Transceiver
850nm multi-mode transceiver
300m max distance
LC/UPC ConnectorTXM431-SR
-
10GBase-LR SFP+ LC Transceiver
1310nm single-mode transceiver
10km max distance
LC/UPC ConnectorTXM431-LR
-
1M/3M Direct Attach SFP+ Cable
1M/3M cable length
SFP+ connector on both sidesTXC432-CU1M / TXC432-CU3M
Casos relacionados
-
Soborka ISP
TP-Link Helps ISP Soborka Provide Better Service for Subscribers
Soborka ISP
TP-Link Helps ISP Soborka Provide Better Service for Subscribers
“TP-Link’s products offer tremendous value, which allowed us to reduce the cost of updating our large network without compromising performance. Our customers are much more satisfied with the network since the upgrade. It has done a lot to improve our reputation.” —Soborka's CEO
| CARACTERÍSTICAS DE HARDWARE | |
|---|---|
| Estándares y Protocolos | IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE802.3z, IEEE 802.3ae, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1x, IEEE 802.1p |
| Interfaz | 24 Puertos RJ45 10/100/1000Mbps 4 Ranuras SFP+ 10G fijas |
| Medios de Red | 10BASE-T: Cable UTP categoría 3, 4, 5 (máximo 100m) 100BASE-TX/1000Base-T: Cable UTP categoría 5, 5e o superior (máximo 100m) 1000BASE-X: MMF, SMF 10GBASE-LR 10GBASE-SR |
| Cantidad de Ventiladores | Sin ventilador |
| Bloqueo de Seguridad Físico | Yes |
| Fuente de Alimentación | 100-240V, 50/60Hz |
| Consumo de Potencia | 21.8W |
| Peso | 2.8kg |
| Dimensiones | 440 * 180 * 44 mm. (17.32 * 7.1 * 1.73 in) |
| Montaje | Rack Mountable |
| Consumo de Potencia Máximo | 21.8W (220V/50Hz) |
| Disipación máxima de calor | 74.38 BTU/h |
| APILAMIENTO FÍSICO | |
|---|---|
| Transceiver SFP+ Instalables y Cables (DAC) de Cobre de Conexión Directa | TXM431-SR TXM432-LR TXC432-CU1M TXC432-CU3M |
| Máximo Número de Puertos Apilables Instalables | 2 SFP+ |
| Velocidad de Apilamiento (por Puerto) | 20Gbps (Full-Duplex) |
| Nº de Unidades por Apilamiento | Hasta 6 unidades |
| RENDIMIENTO | |
|---|---|
| Capacidad de Conmutación | Hasta 128Gbps para un switch individual |
| Tasa de Reenvío de Paquetes | Hasta 95.2Mpps para un switch individual |
| Tabla de Direcciones MAC | 16K |
| Memoria del Buffer de Paquete | 1.5MB |
| Jumbo Frame | 9KB |
| Número de Rutas Estáticas | 32 IPv4 |
| Número de Interfaces IP | 16 |
| CARACTERÍSTICAS DE SOFTWARE | |
|---|---|
| Calidad de Servicio | Soporta prioridad 802.1p CoS/DSCP Soporta 8 colas de prioridad Programación de colas: SP, WRR, SP+WRR Port/Flow - basado en Limitación de Tasa IPv6 QoS* VLAN de Voz |
| Características L2 y L2+ | Rutas Estáticas DHCP Relay* IGMP Snooping V1/V2/V3 802.3ad LACP (Hasta 14 grupos de agregación, conteniendo 8 puertos por grupo) Spanning Tree STP/RSTP/MSTP BPDU Filtering/Guard TC/Root Protect Loopback detection 802.3x Flow Control LLDP, LLDP-MED* |
| VLAN | Soporta hasta 4K VLANs simultáneamente (hasta 4K IDs de VLAN) VLAN basada en MAC/Protocolo |
| Lista de Control de Acceso | Filtrado de paquetes L2～L4 basado en dirección MAC origen y destino, dirección IP, puertos TCP/UDP IPv6 ACL* |
| Seguridad | AAA* Seguridad por Puerto DHCP Snooping Vinculación IP-MAC-Puertp Inspección ARP 802.1x and Radius Authentication SSH v1/v2 SSL v3/TLSv1 Control de Tormentas Broadcast/Multicast/Unknown-unicast Defensa Dos |
| IPv6 | Apilamiento dual IPv4/IPv6 Multicast Listener Discovery (MLD) Snooping IPv6 neighbor discovery (ND) Path maximum transmission unit (MTU) discovery Internet Control Message Protocol (ICMP) versión 6 TCPv6/UDPv6 |
| Aplicaciones IPv6 | Cliente DHCPv6 Ping6 Tracert6 Telnet (v6) IPv6 SNMP IPv6 SSH IPv6 SSL Http/Https IPv6 TFTP |
| Gestión | Gestión Web basada en GUI y CLI SNMP v1/v2c/v3,compatible con MIBs públicas y privadas de TP-Link RMON (grupos 1, 2, 3, 9) Monitorización de CPU Port Mirroring Actualización de Firmware: TFTP & Web Diagnóstico de Sistema: VCT SYSLOG & MIBS Públicas Dual Image *Estas funcionalidades serán soportadas en una futura actualización de firmware. |
| Otros | |
|---|---|
| Certificaciones | CE, FCC, RoHS |
| Contenido del Paquete | T1700G-28TQ Cable de Alimentación Guía de Instalación CD de Recursos Kit de Montaje en Rack Pies de Goma |
| Requisitos del sistema | Microsoft® Windows® XP, Vista™ or Windows 7, Windows 8/8.1/10, MAC® OS, NetWare®, UNIX® o Linux. |
| Factores Ambientales | Operating Temperature: 0℃~40℃ (32℉~104℉); Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90%RH non-condensing Storage Humidity: 5%~90%RH non-condensing |