Descarga para OC300 V1

Vídeo de configuración

• Cómo configurar toda la red de puertas de enlace, conmutadores y EAP mediante el controlador Omada SDN

  Este video demostrará cómo realizar una configuración completa con los productos TP-Link Omada, que incluyen puertas de enlace, conmutadores y EAP. Como ejemplo, vamos a construir las redes alámbricas e inalámbricas desde cero en nuestra oficina de TP-Link. La configuración consta de 7 pasos: Paso 1. Iniciar sesión en el controlador Paso 2. Adoptar dispositivos Paso 3. Ver panel y menús Paso 4. Configurar WAN Paso 5. Configurar LAN y VLAN Paso 6. Configurar Wi-Fi Paso 7. Configurar ACL

  Más Carpeta

• How to configure Omada Hardware Controller via Omada App

  This videos shows how you to set up the Omada Hardware Controller (OC200 is used as an example) via Omada app locally and remotely.

  Más Carpeta

• How to configure Omada Hardware Controller via a Web Browser

  This videos shows how you to set up the Omada Hardware Controller (OC200 is used as an example) via a web browser locally and remotely.

  Más Carpeta

• How to Choose an Omada SDN Controller

  This video will show you how to choose an Omada SDN Controller and its management interface.

  Más Carpeta

• How to setup the Omada Hardware Controller (OC200/OC300) via web browser

  This video will demonstrate how to set up OC200/OC300 via web browser. The setup consists of four steps: • Connect the controller to your local network. • Log in with your TP-Link ID. • Add the controller to your TP-Link ID. • Set up the controller THIS VIDEO APPLIES TO: • All TP-Link EAP models (except EAP120 and EAP220) • Omada Hardware Controller (OC200/OC300) • Mass EAPs (usually more than three)

  Más Carpeta

• How to setup the Omada Hardware Controller (OC200/OC300) via your mobile phone

  This video will demonstrate how to set up OC200/OC300 via your mobile phone. The setup consists of four steps: • Connect the controller to your local network. • Log in with your TP-Link ID. • Add the controller to your TP-Link ID. • Set up the controller THIS VIDEO APPLIES TO: • All TP-Link EAP models (except EAP120 and EAP220) • Omada Hardware Controller (OC200/OC300) • Mass EAPs (usually more than three)

  Más Carpeta

Filtro de funciones: Todo Guía de configuraciónSolución de problemasAntes de comprarRequisito de la aplicación de usuarioCuando se configuraAviso de seguridadMás asistenciaPreguntas y respuestas sobre la explicación funcional o los parámetros de especificaciónDeclaración oficial

Preguntas Frecuentes

• Introducción a la página de estadísticas y la función de exportación de datos en el controlador Omada 11-13-20241844
• Cómo configurar una cuenta en el controlador Omada 11-06-20241888
• Cómo eliminar la alerta de puerto bloqueado 11-06-20242767
• ¿Qué debo hacer si no quiero recibir alertas de ataques detectados en Gateway? 10-29-20242707
• Introducción a Omada 09-02-20246141
• Puesta en marcha del Controlador Omada y adopción de dispositivos [v.1.0.2.4 ] 09-30-2024191
• Cómo se crea una cuenta TP Link Cloud y cuáles son los modos de añadir un Controlador Omada [v.1.0.2.4 ] 09-30-2024234
• Configuración para añadir perfiles en el controlador Omada [v.1.0.2.4 ] 09-30-2024150
• Ejemplo de código y API para servidor de portal externo (Omada Controller 5.0.15 o superior) 04-26-202469050
• Cómo agregar el controlador Omada a través de la aplicación Omada 06-25-202410976
• Cómo descubrir dispositivos Omada a través del controlador de software y el controlador de hardware 09-04-202410916
• ¿Qué puedo hacer cuando el controlador Omada se muestra sin conexión desde Omada Cloud? 09-04-202410139
• ¿Qué debo hacer si el controlador de hardware Omada no puede detectar la unidad USB? 09-03-20245147
• Nombres de dominio de Omada Cloud 04-02-202434740
• Declaración sobre la vulnerabilidad Spring Framework RCE (para el controlador de software Omada) 04-15-202448705
• Cómo convertir el formato de certificado SSL usando OpenSSL (para el controlador Omada SDN) 04-16-202476350
• ¿Qué hacer si recibe una alerta de "El número de registros está en el límite"? 04-19-202451806
• ¿Cómo usar el modo de recuperación para recuperar el firmware del controlador de hardware Omada? 12-21-202173067
• Qué hacer si no puedes encontrar la página de Omada SDN Controller 05-20-202478758
• Preguntas frecuentes sobre la solución Omada SDN relacionadas con la actualización y la gestión 05-30-202477043
• Cómo utilizar herramientas en el controlador Omada 06-27-202410338
• Cómo configurar la VLAN de administración en el controlador Omada SDN (4.4.4 o superior) 07-03-2024246658
• Función PPSK con diferentes servidores RADIUS Guía de configuración 06-25-202411148
• Cómo migrar el controlador Omada con la función de migración 03-27-202454786
• Ejemplo de código y API para servidor RADIUS con portal web externo (controlador Omada 4.1.5 o superior) 05-30-202469131
• ¿Cómo agregar una puerta de enlace Omada a la red? (Controlador 4.3.5 o inferior) 05-27-2024124519
• ¿Cómo agregar una puerta de enlace Omada a la red? (Controlador 4.4.3 o superior) 04-30-202480584
• Guía de configuración en VLAN dinámica con la función de asignación de VLAN de RADIUS 04-30-202476796
• Configuraciones de VLAN de los puertos LAN en Omada Gateway en modo Controlador 04-30-202482305
• Cómo configurar la lista negra o blanca de URL utilizando la función de filtrado de URL del controlador Omada 04-26-202489823
• ¿Cómo preconfigurar la configuración de WAN en el controlador Omada (v5 o superior)? 04-19-202466266
• ¿Cómo configurar la función de grupo WLAN en el controlador SDN? (Nueva interfaz de usuario) 04-17-202442126
• ¿Cómo deshabilitar WiFi de 5GHz para Omada EAP? 04-17-202474320
• ¿Cómo configurar el ID de PVID/VLAN para el segundo puerto en el EAP? 04-17-202445535
• Guía de configuración de PPSK 04-09-202460739
• Guía de configuración de autenticación EAP-TLS para WPA-Enterprise (con FreeRADIUS) 04-04-2024109831
• Cómo pasar por el asistente de configuración al iniciar el controlador Omada SDN 03-27-202437617
• Anuncio sobre la interrupción de Wi-Fi de Facebook 03-26-202442972
• Cómo administrar dispositivos Omada en diferentes sitios usando el controlador Omada SDN a través de VPN (Controlador 5.0 o superior) 03-22-202440352
• Cómo administrar dispositivos Omada en diferentes sitios usando el controlador Omada SDN a través del reenvío de puertos (controlador 5.0 o superior) 03-22-202460643
• Las diferencias y los comunes de tres controladores Omada. 03-19-202431300
• Cómo obtener un archivo de copia de seguridad en Omada Hardware/Software/Cloud-Based Controller superior a V5.8 03-04-202430193
• ¿Cómo utilizar el servidor SMTP cifrado en el controlador Omada SDN? 02-28-202250228
• Cómo actualizar o degradar el firmware del controlador Omada 11-06-202345851
• Guía de configuración CLI para el controlador Omada SDN (v5.9.9 y superior) 08-11-202345689
• Cómo habilitar el acceso vía nube en el controlador Omada SDN 07-21-202345828
• Cómo configurar la función del portal en el controlador Omada 04-17-2023343410
• Cómo configurar la autenticación de vales en el controlador Omada 07-29-2022262833
• ¿Qué puertos utilizan Omada Controller y EAP Discovery Utility? 12-29-2021102833
• Cómo importar la página web de su portal personalizado a Omada Controller 12-29-202145320
• Cómo eliminar correctamente el registro de todos los eventos en el controlador Omada 12-17-202150194

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

• Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
• Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. 
  Cómo encontrar la versión de hardware en un dispositivo de TP-Link
• Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
• To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
• It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
• Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

OC300(UN)_V1_1.26.6 Build 20241101		Descarga
Fecha de Publicación: 2024-11-14	Idioma: Multilingüe	Tamaño de Archivo: 256.79 MB
Release Notes > Built-in Omada SDN Controller v5.14.32.56

OC300(UN)_V1_1.25.3 Build 20240620		Descarga
Fecha de Publicación: 2024-06-28	Idioma: Multilingüe	Tamaño de Archivo: 250.89 MB
Release Notes > Built-in Omada SDN Controller v5.14.26.23

OC300(UN)_V1_1.22.4 Build 20240304		Descarga
Fecha de Publicación: 2024-04-02	Idioma: Multilingüe	Tamaño de Archivo: 250.09 MB
Release Notes > Guía de Usuario > Built-in Omada SDN Controller 5.13.30.20

OC300(UN)_V1_1.19.3 Build 20230906		Descarga
Fecha de Publicación: 2023-09-19	Idioma: Inglés	Tamaño de Archivo: 234.00 MB
Release Notes > Guía de Usuario > Built-in Omada SDN Controller V5.12.9

OC300(UN)_V1_1.17.0 Build 20230328		Descarga
Fecha de Publicación: 2023-04-13	Idioma: Multilingüe	Tamaño de Archivo: 208.93 MB
Release Notes > Guía de Usuario > Built-in Omada SDN Controller v5.9.32

OC300(UN)_V1_1.14.7 Build 20221206		Descarga
Fecha de Publicación: 2022-12-14	Idioma: Multilingüe	Tamaño de Archivo: 213.33 MB
Release Notes > Built-in Omada SDN Controller v5.7.6

OC300(UN)_V1_1.13.1 Build 20220921		Descarga
Fecha de Publicación: 2022-11-01	Idioma: Multilingüe	Tamaño de Archivo: 190.15 MB
Release Notes > Guía de Usuario > Built-in Omada Controller v5.6.4

OC300(UN)_V1_1.12.1 Build 20220803		Descarga
Fecha de Publicación: 2022-09-01	Idioma: Multilingüe	Tamaño de Archivo: 186.44 MB
Release Notes > Built-in Omada Controller v5.5.7

OC300(UN)_V1_1.11.3 Build 20220715		Descarga
Fecha de Publicación: 2022-08-03	Idioma: Inglés	Tamaño de Archivo: 184.11 MB
Release Notes > Guía de Usuario > Built-in Omada SDN Controller v5.4.7

OC300(UN)_V1_1.10.7_20220623		Descarga
Fecha de Publicación: 2022-07-25	Idioma: Inglés	Tamaño de Archivo: 182.57 MB
Release Notes > Built-in Omada SDN Controller v5.3.2

OC300(UN)_V1_1.8.2 Build 20220411		Descarga
Fecha de Publicación: 2022-05-17	Idioma: Inglés	Tamaño de Archivo: 181.03 MB
Release Notes > Built-in Omada SDN Controller v5.1.8

OC300(UN)_V1_1.7.1_20220112		Descarga
Fecha de Publicación: 2022-01-19	Idioma: Inglés	Tamaño de Archivo: 161.72 MB
Release Notes > Built-in Omada SDN Controller v5.0.30 If you are planning to upgrade to this version from an old Controller (V3.2.14 or below), please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

OC300(UN)_V1_1.2.3 Build 20210914		Descarga
Fecha de Publicación: 2021-10-26	Idioma: Inglés	Tamaño de Archivo: 123MB
Release Notes > Guía de Usuario > Built-in Omada SDN Controller v4.4.6 If you are planning to upgrade to this version from an old Controller (V3.2.14 or below), please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller. Some new features of the Controller require firmware upgrades to the device, the firmware for gateways will be released soon.

OC300(UN)_V1_1.2.2 Build 20210721		Descarga
Fecha de Publicación: 2021-09-06	Idioma: Inglés	Tamaño de Archivo: 123.24MB
Release Notes > Guía de Usuario > Build-in Omada SDN Controller v4.4.4 If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

OC300(UN)_V1_1.1.0 Build 20210406		Descarga
Fecha de Publicación: 2021-04-28	Idioma: Inglés	Tamaño de Archivo: 120.33MB
Release Notes > Guía de Usuario > Build-in Omada SDN Controller v4.3.5 If you are planning to upgrade from the old controller(v3.2.14 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller. Some new functions of the Controller require device firmware support, and the supporting firmware for routers and switches will be released soon.

OC300(UN)_V1_1.0.4 Build 20210118		Descarga
Fecha de Publicación: 2021-03-03	Idioma: Inglés	Tamaño de Archivo: 119.38MB
Guía de Usuario > Built-in Omada SDN controller v4.2.11. If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.   Supported device models and firmware: EAP: EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above EAP265 HD_V1, EAP230-Wall_V1, EAP235-Wall_V1, EAP660 HD_V1, EAP620 HD_V1 Switch: TL_SG3428MP_V1, TL_SG3428_V1, TL-SG2210MP_V1, TL-SG2210P_V3.20, TL-SG2428P_V1, TL-SG2008P_V1, TL-SG2008_V3, TL-SG3428X_V1, TL_SG3428XMP_V1, TL-SG3210XHP-M2_V1, TL-SG3452P_V1, TL-SG3452_V1, TL-SG3428MP_V1, TL-SG3210_V3, TL-SG2218_V1, TL-SL2428P_V4.2 Gateway: TL-R605_V1, TL-ER7206_V1   Bug Fixed: 1. Fixed the bug that we may not be able to export the XLSX file in Settings->Services->Export Data. 2. Fixed the bug that the OC300 may get an “Invalid Controller” error in the Cloud Access function if the OC300 didn’t connect to the Internet during the Quick Setup. 3. Fixed the bug that the IPSec and L2TP over IPSec VPN cannot be set on the same WAN port at the same time. 4. Fixed the bug that the speedtest in the dashboard may display general error and internet Capacity and Gateway are still displayed as N/A. 5. Fixed the bug that we may not be able to re-adopt the Mesh AP if we failed to adopt it with the wrong password for the first time. 6. Fixed the bug that the wireless client will be displayed as a wired client (LAN) on the controller. 7. Fixed the bug that the controller's band steering range is inconsistent with the actual supported range of EAP, resulting in the configuration not taking effect. 8. Fixed the bug that the wired clients that have passed portal authentication may display 0 traffic data in the Authorized Clients list. 9. Fixed the bug that the wired clients that have passed portal authentication may have lower traffic statistics. 10. Fixed the bug that the Controller may show a general error if we forget an EAP and then delete an SSID. 11. Fixed the bug that the wired clients that have passed RADIUS portal authentication may have higher RADIUS accounting traffic statistics.   Notes:          1. For OC300 (UN) V1 Only. 2. Omada SDN Controller can configure and manage only certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller. 3. If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of the Omada Controller Upgrade Guide. 4. Once upgraded to this version of Omada Controller, you will be NOT able to downgrade to version 3.2.10 or below.  5. This version of the controller is applied to the Omada APP of version 3.0.X or above.

OC300(UN)_V1_1.0.3_Build_20201119		Descarga
Fecha de Publicación: 2020-12-18	Idioma: Inglés	Tamaño de Archivo: 118.6MB
Guía de Usuario > Built-in Omada SDN controller v4.2.8. If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.   Supported device models and firmware: EAP: EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above EAP265 HD_V1, EAP230-Wall_V1, EAP235-Wall_V1, EAP660 HD_V1, EAP620 HD_V1 Switch: TL_SG3428MP_V1, TL_SG3428_V1, TL-SG2210MP_V1, TL-SG2210P_V3.20, TL-SG2428P_V1, TL-SG2008P_V1, TL-SG2008_V3, TL-SG3428X_V1, TL_SG3428XMP_V1, TL-SG3210XHP-M2_V1 Gateway: TL-R605_V1, TL-ER7206_V1   New Feature/Enhancement: 1. Support to manage TL-SL2428P(UN) 4.20. 2. Optimize the protocol for the device reporting information of rate/duplex capability. 3. Optimize the password retrieval mechanism. If multiple local accounts are bound to one mailbox, you can choose which account to reset the password. 4. Add the batch cancelling of devices migration in the migration function. 5. Vulnerability optimization   Bug Fixed: 1. Fixed the bug that the device will move to the upper left corner when you visit again if the device location is locked in the MAP. 2. Fixed the bug that uplink signal strength of Mesh EAP is not displayed accurately on the devices private configuration page. 3. Fixed the bug that the user without device permission may display that it still has permission in the account settings. 4. Fixed the bug that the function of Log Server/Alert Email may not take effect after restoring the backup file of Controller. 5. Fixed the bug that you may unsuccessfully import the local user account in the Hotspot Manager. 6. Fixed the bug that the “Last Seen” time in the private configuration page of the switch is the last uptime (not the last disconnected time) after the switch disconnects from Omada Controller. 7. Fixed the bug that the expiration time of Facebook authentication in “->authorized clients” is inconsistent with the actual expiration time. 8. Fixed the bug that the Controller may generate lots of roaming logs if clients leave from one EAP to another EAP implicitly since clients still send auth frame to the previous EAP.   Notes: 1.  For OC300(UN) V1 Only. 2.  Omada SDN Controller can configure and manage only certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller. 3.  If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of Omada Controller Upgrade Guide. 4.  Once upgraded to this version of Omada Controller, you will be NOT able to downgrade to version 3.2.10 or below.  5.  This version of the controller is applied to Omada APP of version 3.0.X or above.

OC300(UN)_V1_1.0.1 Build 20201016		Descarga
Fecha de Publicación: 2020-11-13	Idioma: Inglés	Tamaño de Archivo: 118.58MB
Guía de Usuario > Built-in Omada SDN controller v4.2.4. Omada SDN Controller can manage only certain devices with supported firmware. Please make sure your device is compatible with Omada SDN Controller, and follow Omada Controller Upgrade Guide to upgrade OC200.   Supported device models and firmware: EAP: EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above EAP265 HD_V1, EAP230-Wall_V1, EAP235-Wall_V1, EAP660 HD_V1, EAP620 HD_V1 Switch: TL_SG3428MP_V1, TL_SG3428_V1, TL-SG2210MP_V1, TL-SG2210P_V3.20, TL-SG2428P_V1, TL-SG2008P_V1, TL-SG2008_V3, TL-SG3428X_V1, TL_SG3428XMP_V1, TL-SG3210XHP-M2_V1 Gateway: TL-R605_V1, TL-ER7206_V1   New Feature/Enhancement: 1.  Support to import the SSL certificate of PFX format.  2.  Support to create of up to 1000 sites. 3.  Support arbitrary adjustment of logo display and closing logo. 4.  Support to paste the IP address for everywhere there is IP setting. 5.  Support to restore the site privilege setting for cloud users when backup and restore for the same controller. 6.  Support to print all unused voucher codes.  7.  Support to delete the archived alert log and event log. 8.  Support to export device list, client list, etc. in Export Data function.  9.   Support to drag and drop card adjust the dashboard display. 10.  Add the Hostname/IP setting which will be used for the controller URL in the notification email. 11.  Add Past Connection page in the Insight menu. 12.  Improve the MAP topology display.     Bug Fixed: 1.  Fixed the bug that the Limited Online Users voucher code still can be used after expired. 2.  Fixed the bug that cannot use the website subpath in The Promotional URL settings of portal function. 3.  Fixed the bug that cannot import the picture in MAP and Portal settings if access controller with cloud access. 4.  Fixed the bug that the cutout logo will show a black background. 5.  Fixed the bug that auto backup and schedule function cannot work if the time zone uses summertime.   Notes: 1.  For OC300(UN) V1 Only. 2.  Omada SDN Controller can configure and manage only certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller. 3.  If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of Omada Controller Upgrade Guide. 4.  Once upgraded to this version of Omada Controller, you will be NOT able to downgrade to version 3.2.10 or below.  5.  This version of the controller is applied to Omada APP of version 3.0.X or above.

OC300(UN)_V1_1.0.0 Build 2020080		Descarga
Fecha de Publicación: 2020-11-09	Idioma: Inglés	Tamaño de Archivo: 114.01MB
Guía de Usuario > Bundle Omada Controller 4.1.5 If you are using the old controller(v3.2.10 or below) and planning to replace with OC300, please read the Omada Controller Upgrade Guide at first.   Supported device models and firmware: EAP: EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above EAP265 HD_V1, EAP230-Wall_V1, EAP235-Wall_V1, EAP660 HD_V1, EAP620 HD_V1 Switch: TL_SG3428MP_V1, TL_SG3428_V1, TL-SG2210MP_V1, TL-SG2210P_V3.20, TL-SG2428P_V1, TL-SG2008P_V1, TL-SG2008_V3, TL-SG3428X_V1, TL_SG3428XMP_V1, TL-SG3210XHP-M2_V1 Gateway: TL-R605_V1, TL-ER7206_V1   New Feature/Enhancement: 1. First firmware for OC300(UN)_v1. 2. Suitable for small and medium business network. 3. Omada SDN hardware controller provides a unified approach to configuring enterprise networks comprised of routers, switches, and wireless access points. 4. Brand new UI and style to provide high-efficiency, rapid and comprehensive network settings and maintenance function.   Notes: 1. Omada SDN Controller can configure and manage only the certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller. 2. This version of controller is applied to Omada APP of version 3.0.X or above. 3. For OC300 (UN) v1.0 only.

To Use Third Party Firmware In TP-Link Products

Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.

Open Source Code For Programmers (GPL)

Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.

You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.

The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.

Código GPL

• OC300(UN)_V1_GPL

Simuladores

Versión de firmware	Modo en Uso	Idioma
Omada SDN Controller 5.0	-	Inglés	Navegar
Omada SDN Controller 4.3	-	Inglés	Navegar