Descarga para T1700G-28TQ V3

Elige la versión de hardware:

>Cómo encontrar la versión de hardware en un dispositivo de TP-Link

IMPORTANTE : La disponibilidad de modelos y versiones de hardware varía según la región. Consulta el sitio web regional de TP-Link para determinar la disponibilidad del producto.

Visión General

T1700G-28TQ(UN)_V3_Datasheet

Manual

Archivos MIBs

T1700G-28TQ(UN)_V3_MIB_20190108

Descarga

Fecha de Publicación: 2019-05-13

Idioma: Inglés

Tamaño de Archivo: 202.51 KB

Sistema Operativo: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux

Preguntas Frecuentes

Cómo configurar el relé DHCP en un switch TP-Link 11-06-2024256680
How to configure LACP on our Smart/ Managed Switch 10-29-2024236437
Cómo configurar la VLAN 802.1Q para puertos LAG en switches inteligentes y administrados mediante la nueva GUI 09-16-202490252
¿Cómo configurar OpenSSH 7.0 (y superior) para iniciar sesión en switches inteligentes y administrados? 09-12-2024133774
¿Qué debo hacer si no puedo acceder a la página de administración web de mi switch TP-Link? 08-30-2024349541
How to Block Unknown Devices to Access the Switch by Using IP Source Guard 08-09-202476177
Why the firmware version does not change after upgrading in T Series switches? 08-09-202462739
How to configure the default gateway of the smart and managed switches using the old GUI 08-09-2024258945
How to set up an Enterprise VPN using tp-link products 08-02-202471215
Instrucciones de solución de problemas del puerto SFP del switch TP-Link 07-09-202486204
Do you still have any doubt about the effect of QoS on the Switch of TP-Link? 07-23-202489466
How to block an illegal client with Certain IP address from getting access to the network using TP-Link Managed Switches 07-01-202479199
Cómo lograr la autenticación AAA a través del servidor TACACS+ en el conmutador 04-26-202459814
How to Configure Port Isolation Function on Our Layer 2 Manage switches through Web Browser 06-29-2022128541
How to Configure Port Mirror on TP-Link Smart Switches and L2 Managed Switches 06-29-202282815
How to configure 802.1q VLAN on Smart Switches 06-29-2022148372
How to limit the port rate of the incoming traffic via ACL function 06-28-202259372
How to test the Jumbo Frame pass-through feature on TP-Link switches 06-28-2022185552
How to build up a multi-nets network via Multi-Nets NAT feature on TP-Link router with L2+/L3 switches 06-28-2022325641
How to change the IP address of the smart and managed switches using the old GUI and CLI 06-28-2022327139
How to configure MAC ACL on Smart/Managed switch 06-28-202285125
How to set up multi SSID on EAP Product 06-28-20222108
How to configure Extended IP ACL 04-28-201285550

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty.
Cómo encontrar la versión de hardware en un dispositivo de TP-Link
Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

T1700G-28TQ(UN)_V3_190108

Descarga

Fecha de Publicación: 2019-02-26

Idioma: Inglés

Tamaño de Archivo: 14.50 MB

Modifications and Bug Fixes:
First firmware released.

Notes:
1. For T1700G-28TQ V3.0
2. If your device's Hardware Version is 2.0, after upgrading to this firmware, the old configuration will be lost.

To Use Third Party Firmware In TP-Link Products

Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.

Open Source Code For Programmers (GPL)

Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.

You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.

The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.

Código GPL

T1700G-28TQ(UN)_V3_GPL

Simuladores

Versión de firmware	Modo en Uso	Idioma
181024(UN)	-	Inglés	Navegar

Nota:

1. El emulador es una GUI web virtual donde puede experimentar el panel de administración de productos TP-Link.

2. Es posible que los emuladores enumerados no tengan el firmware más reciente.

3. Las funciones que se muestran son para referencia y su disponibilidad puede depender de las regulaciones locales. Para obtener más información, consulte la hoja de datos o la página del producto.

De United States?

Obtener productos, eventos y servicios para su región.

Ir Otras opciones