Descarga para T2600G-28MPS V4

Elige la versión de hardware:

>Cómo encontrar la versión de hardware en un dispositivo de TP-Link

IMPORTANTE : La disponibilidad de modelos y versiones de hardware varía según la región. Consulta el sitio web regional de TP-Link para determinar la disponibilidad del producto.

Visión General

T2600G-28MPS(UN)_V4_Datasheet

Manual

Switch Gestionable Gigabit L2 JetStream PoE+ de 24 Puertos con 4 Ranuras SFP
T2600G-28MPS

Archivos MIBs

T2600G-28MPS(UN)_V4_MIB_20181116

Descarga

Fecha de Publicación: 2019-05-13

Idioma: Inglés

Tamaño de Archivo: 205.75 KB

Sistema Operativo: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux

Cliente 802.1 X

TP-LINK_802.1X_Client_Software

Descarga

Fecha de Publicación: 2017-09-05

Idioma: Inglés

Tamaño de Archivo: 5.5MB

Sistema Operativo: Win2000/XP/2003/Vista/7/8/8.1/10

Driver

TP-LINK_USB_Console_Driver

Descarga

Fecha de Publicación: 2019-03-13

Idioma: Inglés

Tamaño de Archivo: 3.10 MB

Sistema Operativo: Win2000/XP/2003/Vista/7/8/8.1/10

Notes:

For TP-LINK switches with USB Console port

Preguntas Frecuentes

Cómo configurar MSTP en switches administrados L2 utilizando la nueva GUI 09-03-202463522
Cómo configurar STP/RSTP en switches administrados L2 utilizando la nueva GUI 09-03-202481276
Cómo configurar la VLAN 802.1Q para puertos LAG en switches inteligentes y administrados mediante la nueva GUI 09-16-202490255
¿Cómo configurar OpenSSH 7.0 (y superior) para iniciar sesión en switches inteligentes y administrados? 09-12-2024133777
¿Cómo restablecer el switch a la configuración predeterminada de fábrica usando PuTTy? 09-10-2024106102
Cómo configurar la VLAN de voz para optimizar la transmisión del tráfico de voz en los switches inteligentes y administrados de TP-Link utilizando la nueva GUI 09-10-2024111061
¿Qué debo hacer si no puedo acceder a la página de administración web de mi switch TP-Link? 08-30-2024349552
¿Cómo acceder al switch administrado TP-Link JetStream a través del puerto de la consola? 07-31-2024365447
La diferencia entre la función Voice VLAN y la función Auto VOIP 07-15-202480157
Do you still have any doubt about the effect of QoS on the Switch of TP-Link? 07-23-202489470
How to build up a multi-nets network via Multi-Nets NAT feature on TP-Link router with L2+/L3 switches 06-28-2022325646
The nodes that TP-Link T1600/T2600 series switch use to display the CPU and Memory utilization through SNMP 12-26-201668976

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty.
Cómo encontrar la versión de hardware en un dispositivo de TP-Link
Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

T2600G-28MPS(TL-SG3424P)(UN)_V4_20200728

Descarga

Fecha de Publicación: 2020-08-24

Idioma: Inglés

Tamaño de Archivo: 16.91 MB

Enhancement:
Optimize the POE function to solve the problem that probabilistic cannot provide power correctly.
Notes:
1. For T2600G-28MPS(UN) V4.0
2. Your device's configuration will not be lost after upgrading, which means you don't need to configure your device again after upgrading.

T2600G-28MPS(UN)_V4_20200109

Descarga

Fecha de Publicación: 2020-04-15

Idioma: Inglés

Tamaño de Archivo: 16.90 MB

New Features/Enhancements:
1. Add the feature that needs to change the password when login for the first time.
2. Add the feature that can choose not to change the IP address when resetting the switch.
3. Add "service reset-disable" for removing reset option from Bootutil.
4. Add built-in Telnet client which allows the switch can telnet other devices.
5. Allow disabling HTTP and HTTPS for access types at the same time.
6. Optimize the password character set to support more special characters.
7. Optimize the BPDU Filter feature to make ports not send out BPDU packets when BPDU Filter is enabled.
8. Optimized the CLI display of MVR configurations.
9. Support to display MVR members of inactive and active groups.
10. Support to view/clear mac-address table on port/VLAN.
11. Support to fill in file name with folder path when using SNMP or CLI to upgrade firmware or restore config file through TFTP.
Notes:
1. For T2600G-28MPS(UN) V4.0
2. Your device's configuration will not be lost after upgrading, which means you don't need to configure your device again after upgrading.

3. After upgrading, it cannot downgrade to the old version firmware because of the encryption rule has changed.

T2600G-28MPS(UN)_V4_20181116

Descarga

Fecha de Publicación: 2019-02-14

Idioma: Inglés

Tamaño de Archivo: 16.47 MB

First firmware released

Notes
For T2600G-28MPS(UN) V4.0

To Use Third Party Firmware In TP-Link Products

Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.

Open Source Code For Programmers (GPL)

Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.

You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.

The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.

Simuladores

Versión de firmware	Modo en Uso	Idioma
180301(UN)	-	Inglés	Navegar

Nota:

1. El emulador es una GUI web virtual donde puede experimentar el panel de administración de productos TP-Link.

2. Es posible que los emuladores enumerados no tengan el firmware más reciente.

3. Las funciones que se muestran son para referencia y su disponibilidad puede depender de las regulaciones locales. Para obtener más información, consulte la hoja de datos o la página del producto.

De United States?

Obtener productos, eventos y servicios para su región.

Ir Otras opciones

Descarga para T2600G-28MPS V4

Archivos MIBs

Cliente 802.1 X

Driver

Preguntas Frecuentes

Firmware

To Upgrade

To Use Third Party Firmware In TP-Link Products

Open Source Code For Programmers (GPL)

Simuladores

Q&A - Preguntas y Respuestas

Guía de configuración y características