Download for SG2210XMP-M2
Vx.0=Vx.6/Vx.8/Vx.9(eg:V1.0=V1.6/V1.8V1.9)
Vx.x0=Vx.x6/Vx.x8/Vx.x9 (eg:V1.20=V1.26/V1.28/1.29)
Vx.30=Vx.32/Vx.33 (eg:V3.30=V3.32/V3.33)
1.0_Omada_2.5G_Switch-1000px_normal_20231109030542p.png)
Omada 8-Port 2.5GBASE-T and 2-Port 10GE SFP+ Smart Switch with 8-Port PoE+FAQs
- How do I know the type of my Omada switch?
- What should I do if I forget my Omada switch’s login username or password?
- How to configure Voice VLAN on Omada Switches using Omada Controller
- Troubleshooting for Voice VLAN and Auto VoIP
- Troubleshooting multicast video issues on Omada switches
- How to configure Switch Port Mirroring on Omada Controller
- Troubleshooting guide for ARP Learning Failure
- How to configure Storm Control on Omada Switch via Omada Controller
- How to configure Class of Service (CoS) through Omada Controller
- How to configure Jumbo Frame on Omada Controller
- Suggested configurations for AVoIP protocols on Omada Switches
- How to configure Auto-VoIP on Omada Switches via Omada Controller
- How to configure LLDP & LLDP-MED on Omada Switches via Omada Controller
- Configuration guide of DHCP Options on Omada Switch
- Troubleshooting of Layer 2 Multicast Failure
- How to configure IGMP Snooping on Omada switches for hotel IPTV scenario
- How to configure 802.1X VLAN Assignment on Omada Controller
- Recommended ACL configuration on Omada Switch for common scenarios
- How to configure AAA to assign different privileges for radius users to login on Omada Switch
- Getting started without an Omada Controller
- How to configure Management VLANs for Omada Switches and APs (for SOHO scenario)
- How to configure Management VLANs for Omada Switches and APs (for Business scenario)
- What should I do if my switch has no Internet access?
- What should I do if my Internet from switch is unstable?
- How to build an 802.1X access authentication system using Switches on Omada Controller
- How to configure Optical Line Terminal (OLT) and Omada Switch with XM60A
- How to configure VLAN Interfaces and Static Routes on Omada Switches
- What to do if devices in the same VLAN fail to communicate with each other when connected to TP-Link switch
- Best practice to prevent network loops with Omada SDN solution
Firmware
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （ Normally V1.x=V1）
It is NOT suggested to upgrade firmware which is not for your region. Please click here to choose your own region and download the most suitable firmware version. ( eg. the firmware of EU and US are different hardware versions) - Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- Do NOT upgrade the firmware through wireless connection unless the TP-Link device only has wireless connection.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
SG2210XMP-M2(UN)_V1_1.0.4 Build 20241104 |
Download | |
|---|---|---|
| Published Date: 2024-11-22 | Language: English | File Size: 15.24 MB |
|
SG2210XMP-M2(UN)_V1_1.0.2 Build 20240528 |
Download | |
|---|---|---|
| Published Date: 2024-06-20 | Language: English | File Size: 16.56 MB |
|
Bug Fixed: 1. Fixed the issue that the speed measurement of Google Speed Test is inaccurate when forwarding through switch Layer 3 routing
Notes: 1. This firmware is fully adapted to Omada SDN Controller v5.9 and above. 2. Your device's configuration won't be lost after upgrading. |
||
|
SG2210XMP-M2(UN)_V1_1.0.1 Build 20240423 |
Download | |
|---|---|---|
| Published Date: 2024-05-16 | Language: English | File Size: 16.55 MB |
|
Bug Fixed: 1. Fix the bug that the SFP+ ports cannot link after manually configuring them as 1000M and restarting the device.
Notes: 1. This firmware is fully adapted to Omada SDN Controller v5.9 and above. 2. Your device's configuration won't be lost after upgrading. |
||
To Use Third Party Firmware In TP-Link Products
Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.
Open Source Code For Programmers (GPL)
Please note: The products of TP-LINK partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence termshere. You receive the GPL source codes of the respective software used in TP-LINK products for direct download and further information, including a list of TP-LINK software that contain GPL software code under GPL Code Center.
The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.
Apps
- Omada APP
TP-Link Omada lets you configure settings, monitor network status and manage clients, all from the convenience of a smart phone or tablet. Learn more about Compatible Devices.
Note: SDN switch/router is compatible with Omada App only in controller mode. To use Omada, please update your device's firmware to the latest version.