Download for T1600G-18TS V2

Please choose hardware version:

>How to find the hardware version on a TP-Link device

IMPORTANT: Model and hardware version availability varies by region. Please refer to your TP-Link regional website to determine product availability.
Vx.0=Vx.6/Vx.8/Vx.9(eg:V1.0=V1.6/V1.8V1.9)
Vx.x0=Vx.x6/Vx.x8/Vx.x9 (eg:V1.20=V1.26/V1.28/1.29)
Vx.30=Vx.32/Vx.33 (eg:V3.30=V3.32/V3.33)

Product Overview

T1600G-18TS(UN)_V2_Datasheet

Manual

MIBs Files

T1600G-18TS(UN)_V2_MIB_20180622

Download

Published Date: 2019-05-13

Language: English

File Size: 208.30 KB

Operating System: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux

802.1X Client

TP-LINK_802.1X_Client_Software

Download

Published Date: 2017-09-05

Language: English

File Size: 5.5MB

Operating System: Win2000/XP/2003/Vista/7/8/8.1/10

FAQs

How to configure MSTP on L2 Managed switches using the new GUI 10-29-202463561
How to configure 802.1Q VLAN on Smart and Managed switches using the new GUI 10-29-2024163218
How to configure DHCP Interface Relay on L2 Managed switches using the new GUI 10-29-202482339
How to configure IGMP Snooping for IPTV network on L2 Managed switches using the new GUI 10-29-2024174858
Troubleshooting Instruction of TP-Link switch’s SFP port 07-23-202486267
The difference between the Voice VLAN feature and Auto VOIP feature 07-23-202480216
How to configure DHCP VLAN Relay on L2 Managed switches using the new GUI 07-23-2024146195
What should I do if I cannot access the web management page of my TP-Link switch? 07-23-2024349697
How to build up a multi-nets network via Multi-Nets NAT feature on TP-Link router with L2+/L3 switches 06-28-2022325771
How to configure Getting Time from NTP Server on TP-Link Smart & Managed Switch 06-28-2022229037
How to change the IP address of the smart and L2 managed switches using the new GUI and CLI 06-27-2022183181
How to configure the default gateway of the smart and L2 managed switches using the new GUI 06-27-2022164366
How to configure Voice VLAN to optimize the transmission of voice traffic on TP-Link Smart and Managed Switches using the new GUI 06-27-2022111131
How to configure backup image when upgrading a firmware on TP-Link Smart/Managed Switches using the new GUI 06-27-202259413
How to configure Access Control to block users' access to the switch using the new GUI 06-27-202271113
How to configure Port Isolation on Smart and L2 Managed Switches using the new GUI 06-27-202262517
How to configure 802.1Q VLAN for LAG ports on Smart and Managed switches using the new GUI 06-27-202290296
How to achieve AAA Authentication through TACACS + server on the switch 11-22-202159873
Why are some functions lost after I log in to the switch? 07-20-202149330
How to configure MAC ACL on Smart and L2 Managed switches using the new GUI 06-06-201860479
How to configure OpenSSH 7.0(and above) to login smart and managed switches? 04-17-2018133799

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （ Normally V1.x=V1）
It is NOT suggested to upgrade firmware which is not for your region. Please click here to choose your own region and download the most suitable firmware version. ( eg. the firmware of EU and US are different hardware versions)
Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
Do NOT upgrade the firmware through wireless connection unless the TP-Link device only has wireless connection.
It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

T1600G-18TS(UN)_V2_20190516

Download

Published Date: 2019-07-04

Language: English

File Size: 9.48 MB

Modifications and Bug Fixes:
1. Fix the bug that the existing topology will reconverge when STP is enabled on a port which is not link-up.
2. Fix the bug that the status change of LACP port which is not enabled STP will cause the reconverge of the topology.

Notes:
1. For T1600G-18TS(UN) V2.0.
2. If your device's Hardware Version is 1.0, after upgrading to this firmware, the old configuration will be lost.

T1600G-18TS(UN)_V2_190408

Download

Published Date: 2019-05-29

Language: English

File Size: 8.95 MB

Modifications and Bug Fixes:
1. Support TLS 1.2.
2. Fix the bug that NTP server will be changed when set up only one NTP server and fail to get the time.
3. Fix the bug that cannot set up auto mode for fiber ports which in portchannel.
4. Fix the bug that access control entries will not take effect when two or more entries are added for port binding.

Notes:
1. For T1600G-18TS(UN) V2.0.
2. If your device's Hardware Version is 1.0, after upgrading to this firmware, the old configuration will be lost.

T1600G-18TS(UN)_V2_180622

Download

Published Date: 2018-10-22

Language: English

File Size: 7.70 MB

Modifications and Bug Fixes:
First firmware released.

Notes:
1. For T1600G-18TS(UN) V2.0
2. If your device's Hardware Version is 1.0, after upgrading to this firmware, the old configuration will be lost.

To Use Third Party Firmware In TP-Link Products

Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.

Open Source Code For Programmers (GPL)

Please note: The products of TP-LINK partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.

You can review, print and download the respective GPL licence termshere. You receive the GPL source codes of the respective software used in TP-LINK products for direct download and further information, including a list of TP-LINK software that contain GPL software code under GPL Code Center.

The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.

GPL Code

T1600G-18TS_V2_GPL

Emulators

Firmware Version	Working Mode	Language
180622	-	English	Browse

Note:

1. The emulator is a virtual web GUI where you can experience the TP-Link product management panel.

2. The listed emulators might not have the latest firmware.

3. The features displayed are for reference, and their availability may depend on local regulations. For more information, please refer to the datasheet or product page.

From United States?

Get products, events and services for your region.

GO Other Option

Download for T1600G-18TS V2

MIBs Files

802.1X Client

FAQs

Firmware

To Upgrade

To Use Third Party Firmware In TP-Link Products

Open Source Code For Programmers (GPL)

GPL Code

Emulators

Q&A

Feature Configuration Guide