What can I do if I forgot the login Username & Password (Wireless Router)?

User Application Requirement
Mis à jour02-29-2008 01:08:56 AM 20261
Ce document concerne les modèles suivants : 

The default login username and password both are admin, if you or some one else changed them but you can not remember now, you need do the hard reset to restore the device to factory default settings.

Note: A hard reset will remove all your settings, and your device will be restored to factory default settings. Do not perform a hard reset unless you have backed up your settings or you can do the configuration again.

Method 1:

Directly press and hold the reset button on the rear panel with a pin for approximately 6 to 10 seconds when the device is running, then the device will be reset and reboot automatically.

Please check the Appendix to know which model can be reset by method 1, if you can’t reset the device by following Method 1, please try method 2.

Method 2:

Step 1 Turn off the router (pull the power out of the unit).

Step 2 Press and hold the reset button on the rear panel with a pin, while holding down the reset button turn on the router (plug the power back into the unit), and please continue holding down the reset button for approximately 15 seconds.  

Step 3 Release the reset button and wait for the device to reboot.

Note:

1. Make sure the device is powered on before it reboots completely.

2. After the hard reset, the IP address of the device should be change to the default 192.168.1.1, and the default login username and password are both admin (all lower case).

3. Ensure that the IP address of your computer is in the same IP range with the device. That means your computer should have an IP address like 192.168.1.X (X is in range of 2~253), and the subnet mask is 255.255.255.0, the default gateway should be 192.168.1.1 which is the IP address of the device.

Appendix:

The devices with the specific hardware version and firmware version which listed below can be reset by following method 1. Others, or the hardware and firmware version of which wasn’t listed should be reset by following method 2.

Model

Hardware Version

Firmware Version

ADSL

TD-8610

Any version is OK

090120 or newer

TD-8616

Any version is OK

Any version is OK

TD-8810

Any version is OK

080130 or newer

TD-8811

Any version is OK

080131 or newer

TD-8816

Any version is OK

Any version is OK

TD-8817

Any version is OK

Any version is OK

TD-8840

Any version is OK

080130 or newer

TD-8840T

Any version is OK

Any version is OK

TD-8841

Any version is OK

080131 or newer

TD-8841T

Any version is OK

Any version is OK

TD-W8101G

Any version is OK

Any version is OK

TD-W8901G

Any version is OK

Any version is OK

TD-W8910G

Any version is OK

080731 or newer

TD-W8920G

Any version is OK

080731 or newer

Wireless Router

TL-WR340G

v5

080717 or newer

TL-WR340GD

V1

071123 or newer

TL-WR541G/TL-WR542G

v4/v6

080519 or newer

TL-WR641G/TL-WR642G

v3

080717 or newer

TL-WR841ND

v3

Any version is OK

TL-WR941ND

v2

Any version is OK

Wireless Access Point

TL-WA501G

v1

080407 or newer

TL-WA601G

v1

080325 or newer

Wired Router

TL-R460

v3

080711 or newer

TL-R860

v4

080128 or newer

TL-R480T

v2

080402 or newer

TL-R480T+

v2

080402 or newer

TL-R488T

v2

080402 or newer

TL-R4199

v2

080402 or newer

TL-R4299

v2

080402 or newer

 

Est-ce que ce FAQ a été utile ?

Vos commentaires nous aideront à améliorer ce site.

Recommend Products

De United States?

Infos produits, événements, services pour votre pays.