How to use a specific sip account or network to dial out certain numbers on VOIP Modem Router
User Application Requirement
Mis à jour06-29-2022 01:45:10 AM
29066
29066 Ce document concerne les modèles suivants :
Step 1
Please go to the Voice->Dial Plan->Dial Plan List page. Please click Add.
Step 2
A:
In the new page, please set Strip Prefix as the Operate. Then please fill in blank of Prefix, Max Length and Strip Length. Here we use 111, 32 and 3 for example.
Note:
1. The Max length (Prefix + dialing out numbers) should be more than or equal to the length of the numbers dialed on the telephone.
2. You’d better set the Strip Length equal to the length of the number set in the Prefix blank.
B:
Please select one sip account or PSTN as the Destination and select one of the phones as the Interface Enable. Here we use sip account 100 for example. Then please click Save.
Step3
Then you will be back to the Voice->Dial Plan->Dial Plan List page, please click Add.
Step 4
A:
In the new page, please set Strip Prefix as the Operate. Then please fill in blank of Prefix, Max Length and Strip Length. Here we use 222, 32 and 3 for example.
B:
Please select one sip account or PSTN as the Destination and select one of the phones as the Interface Enable. Here we use sip account 200 for example. Then please click Save.
After all the above settings, you can realize the following demands.
For example:
1. If you want to use sip account 100 to dial out 123 on phone 1, please pick up phone 1 and dial 111123.
If you want to use sip account 200 to dial out 123 on phone 1, please pick up phone 1 and dial 222123.
Est-ce que ce FAQ a été utile ?
Vos commentaires nous aideront à améliorer ce site.