Λήψεις για T1600G-28TS V3.6

Επιλέξτε έκδοση υλικού:

V3.6

>How to find the hardware version on a TP-Link device

ΣΗΜΑΝΤΙΚΟ:Η διαθεσιμότητα έκδοσης μοντέλου και υλικού διαφέρει ανάλογα με την περιοχή. Ανατρέξτε στον τοπικό ιστότοπό σας TP-Link για να προσδιορίσετε τη διαθεσιμότητα των προϊόντων.
Επισκόπηση προϊόντος
Εγχειρίδια

802.1X Client

TP-LINK_802.1X_Client_Software

Λήψεις
Ημερομηνία Έκδοσης: 2017-09-05 Γλώσσα: Αγγλικά Μέγεθος αρχείου: 5.5MB
Λειτουργικό Σύστημα : Win2000/XP/2003/Vista/7/8/8.1/10

Συχνές ερωτήσεις

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

  • Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
  • Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. 
    How to find the hardware version on a TP-Link device
  • Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
  • To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
  • It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
  • Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

T1600G-28TS(UN)_V3.6_20200805

Λήψεις
Ημερομηνία Έκδοσης: 2022-06-11 Γλώσσα: Αγγλικά Μέγεθος αρχείου: 8.54 MB

New Features/Enhancements:
Add the feature that supports to be managed by the Omada SDN Controller. In the controller mode, some advanced functions will be limited. You can refer to the FAQ2936 to see the functions that can be configured on the controller.


Notes:
1. Your device's configuration will not be lost after upgrading, which means you don't need to configure your device again after upgrading.
2. If you choose to manage the switch with controller mode, the settings you configured in standalone mode will lose after the switch is adopted by the controller.   

T1600G-28TS(UN)-V3.6-20200109

Λήψεις
Ημερομηνία Έκδοσης: 2022-06-11 Γλώσσα: Αγγλικά Μέγεθος αρχείου: 9.36 MB

New Features/Enhancements:
1. Add the feature that needs to change the password when login for the first time.
2. Add the feature that can choose not to change the IP address when resetting the switch.
3. Add "service reset-disable" for removing reset option from Bootutil.
4. Add built-in Telnet client which allows the switch can telnet other devices.
5. Allow disabling HTTP and HTTPS for access types at the same time.
6. Optimize the password character set to support more special characters.
7. Optimize the BPDU Filter feature to make ports not send out BPDU packets when BPDU Filter is enabled. 
8. Optimized the CLI display of MVR configurations.
9. Support to display MVR members of inactive and active groups.
10. Support to view/clear mac-address table on port/VLAN.
11. Support to fill in file name with folder path when using SNMP or CLI to upgrade firmware or restore config file through TFTP.
Notes:
1. Your device's configuration will not be lost after upgrading, which means you don't need to configure your device again after upgrading.

2. After upgrading, it cannot downgrade to the old version firmware because of the encryption rule has changed.

T1600G-28TS(UN)_V3.6_20190516

Λήψεις
Ημερομηνία Έκδοσης: 2022-06-11 Γλώσσα: Αγγλικά Μέγεθος αρχείου: 9.06 MB

Modifications and Bug Fixes:
1. Enhanced the MVR function.
2. Support TLS 1.2.
3. Fix the bug that NTP server will be changed when set up only one NTP server and fail to get the time.
4. Fix the bug that cannot set up auto mode for fiber ports which in portchannel. 
5. Fix the bug that access control entries will not take effect when two or more entries are added for port binding.

To Use Third Party Firmware In TP-Link Products

Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.

Open Source Code For Programmers (GPL)

Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.

You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.

The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.

Από United States?

Λάβετε προϊόντα, εκδηλώσεις και υπηρεσίες για την περιοχή σας.