Advanced Setup (IPTV) of TD-W8960N For TM UniFi
Αυτό το άρθρο ισχύει για:
Note:
- Before doing all these settings, please hard reset the device to factory first. If you don’t know how to make it, you can click here to see the guide.
- Please check your hardware version. TD-W8960N v4 doesn't support TM UniFi. FAQ_46
Step 1 Connect your computer to the device´s port 2 or 3. Open the web browser and type in router’s IP address, and press the Enter button. (The default is 192.168.1.1.) The Username and Password are both "admin".
![](https://static.tp-link.com/resources/images/faq/201162295747146.jpg)
Step 2 Go to Advanced Setup->LAN Ports, enable the virtual port, hit Save/Apply.
![](https://static.tp-link.com/resources/images/faq/201162295841157.jpg)
Step 3 Go to Advanced Setup->Layer2 Interface->ETH Interface, select the follow option and hit Save/Apply.
![](https://static.tp-link.com/resources/images/faq/201162295912875.jpg)
Confirm the settings again.
![](https://static.tp-link.com/resources/images/faq/201162295931688.jpg)
Step 4 Go to Advanced Setup->WAN Service, select all current interfaces, hit Remove to delete all.
![](https://static.tp-link.com/resources/images/faq/20116221005933.jpg)
Step 5 Hit Add to create IPTV interface. (Vlan.600) Select the Newly created WAN interface eth0.5/LAN1, hit Next to continue.
![](https://static.tp-link.com/resources/images/faq/201162210040510.jpg)
Step 6 Select & enter the following values for vlan.600 for IPTV, hit Next to continue.
![](https://static.tp-link.com/resources/images/faq/20116221010613.jpg)
Then hit Apply/Save to finish this process.
Step 7 Go to Advanced Setup->WAN Service, hit Add again to create the vlan.500 for Internet PPPoE. Select the same WAN interface, hit Next.
Step 8 Select & enter the following values for Internet PPPoE, hit Next to continue.
![](https://static.tp-link.com/resources/images/faq/201162210123630.jpg)
Step 9 Please ensure you enter the correct UniFi user ID & password (It is case sensitive!!) and the MTU value, hit Next to continue.
![](https://static.tp-link.com/resources/images/faq/201162210158621.jpg)
Step 10 Hit Next to continue.
![](https://static.tp-link.com/resources/images/faq/201162210236119.jpg)
Step 11 Select Use the following Static DNS IP address. You can use the OpenDNS as below or Google:8.8.8.8/8.8.8.4, hit Next to continue.
![](https://static.tp-link.com/resources/images/faq/201162210257113.jpg)
Then click Apply/Save to finish this process.
Step 12 Again, ensure the vlans are created in the exact sequences as follows.
![](https://static.tp-link.com/resources/images/faq/201162210316259.jpg)
Step 13 Go to Advanced Setup->Interface Grouping, hit Add to create & map the IPTV port.
![](https://static.tp-link.com/resources/images/faq/201162210343932.jpg)
Step 14 Enter the IPTV group name, select the correct vlan.600 interface. Select LAN4 on the right panel and move to left panel. Then hit Save/Apply.
![](https://static.tp-link.com/resources/images/faq/20116221044593.jpg)
Step 15 Re-confirm the interface grouping result as follows.
![](https://static.tp-link.com/resources/images/faq/201162210419138.jpg)
Step 16 Go to Advanced Setup->LAN, select IPTV group name and disable the DHCP, hit Save/Apply.
![](https://static.tp-link.com/resources/images/faq/201162210441198.jpg)
Until now, you can use the IPTV with TD-W8960N. If you have any problem, please contact support@tp-link.com. Below is the possible physical connection.
![](https://static.tp-link.com/resources/images/faq/201162210515390.jpg)
Είναι χρήσιμο αυτό το FAQ;
Τα σχόλιά σας συμβάλλουν στη βελτίωση αυτού του ιστότοπου.