How to add an EasyMesh device to your Deco network

Configuration Guide
Ενημερομένα10-17-2024 07:41:41 AM 510
Αυτό το άρθρο ισχύει για: 

Deco EasyMesh allows you to add EasyMesh-compatible routers or extenders of the same or different brands to an existing Deco network to expand Wi-Fi coverage.

Note:

  • Features may vary from different Deco models.
  • The steps may vary depending on your device's operation system. Here we take the iOS system as an example.

Before Start

  1. Make sure the device to be added in the compatibility list that supports EasyMesh. Firmware upgrade may be required for certain models. Please check the user manual or ask the manufacturer.
  2. Make sure your Deco network is set up and working well. If not, you can scan the QR code below or go to Google Play or the App Store to download and install the Deco app on your Android or iOS device. Then follow app instructions to set up your Deco network first.

Follow the steps below to add an EasyMesh device to your Deco network.

1. Open Deco app, go to the Network module and tap +.

Locate the Add icon in the top right corner of the page.

2. Select Add EasyMesh Nodes.

Options to add or replace a device to the Deco network.

3. Select the Deco that is nearest to the EasyMesh device.

Display the Decos models for connection.

4. Use any of the ways to add an EasyMesh device to your Deco network.

  • Connect via WPS button:

  1. Place the EasyMesh device near your Deco.
  2. Power it on and press the WPS button on the EasyMesh device.
  3. Then tap I have pressed the WPS button on the Deco app. Then the EasyMesh device will be added to the Deco network.

Steps for how to use the WPS button to prepare your EasyMesh device. The nework has been set up successfully. A Done button is displayed at the bottom of the page. Display the current network connection status.

  • Connect via an Ethernet cable:

  1. Tap Use wired connection on the Deco app.

Display the position of Use wired connection on the page.

  1. Connect the LAN port of the EasyMesh device and the LAN port of the Deco with an Ethernet cable. Then tap Connected and Exit Setup. The EasyMesh device will be added automatically and appear in the Dashboard.

Steps for how to connect your EasyMesh device with an Ethenet cable. Display the current network connection status.

Είναι χρήσιμο αυτό το FAQ;

Τα σχόλιά σας συμβάλλουν στη βελτίωση αυτού του ιστότοπου.

Από United States?

Λάβετε προϊόντα, εκδηλώσεις και υπηρεσίες για την περιοχή σας.