Download for ER7212PC
Vx.0=Vx.6/Vx.8/Vx.9(eg:V1.0=V1.6/V1.8/V1.9)
Vx.x0=Vx.x6/Vx.x8/Vx.x9 (eg:V1.20=V1.26/V1.28/V1.29)
Vx.30=Vx.32/Vx.33 (eg:V3.30=V3.32/V3.33)
Omada 3-in-1 Gigabit VPN RouterVPN Client
|
Omada VPN v1.0.9 Windows x86 |
Download | |
|---|---|---|
| Published Date: 2024-06-20 | Language: English | File Size: 39.04 MB |
Operating System: Windows x86 |
||
|
1. Updates the Open Source Software Statement. |
||
|
Omada VPN v1.0.9 Windows x64 |
Download | |
|---|---|---|
| Published Date: 2024-06-20 | Language: English | File Size: 45.02 MB |
Operating System: Windows x64 |
||
|
1. Updates the Open Source Software Statement. |
||
FAQs
- Troubleshooting for poor speed test results on Omada Gateways
- How to configure VLAN on Omada Gateway via Omada Controller
- Troubleshooting guide for mDNS Repeater cannot work on the Omada Gateway
- How to set up Site-to-Site Manual IPsec VPN Tunnels on Omada Gateway via Omada Controller
- How to add Omada Controller via Omada App
- The differences and similarities between Load Balancing and Link Backup
- Recommended ACL configuration on Omada Switch for common scenarios
- How to configure IPv6 Access Control on Omada Gateway
- What should I do when speed test results do not meet expectations?
- Client is unable to access the Internet for business router
- How to use Iperf to test the speed on TP-Link routers
- Getting started without an Omada Controller
- How to configure Management VLANs for Omada Switches and APs (for SOHO scenario)
- How to configure Management VLANs for Omada Switches and APs (for Business scenario)
- What should I do if my IPsec VPN connection fails?
- How to configure WAN Mode on the Omada Gateway via Omada Controller
- How to configure Link Backup in Controller Mode
- How to Configure IPsec Failover on Omada Router in Standalone mode
- How to Manage Omada Devices at Different Sites Using Omada SDN Controller via Port Forwarding (Controller 5.0 or Above)
- How to Manage Omada Devices at Different Sites Using Omada SDN Controller via VPN (Controller 5.0 or Above)
Firmware
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty.
How to find the hardware version on a TP-Link device - Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
ER7212PC(UN)_V1_1.1.1 Build 20230901 |
Download | |
|---|---|---|
| Published Date: 2023-09-20 | Language: English | File Size: 208.49 MB |
|
Built-in Omada SDN Controller v5.8.36 and fully adapted to Omada SDN Controller v5.8.36 |
||
To Use Third Party Firmware In TP-Link Products
Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.
Apps
- Omada APP
TP-Link Omada lets you configure settings, monitor network status and manage clients, all from the convenience of a smart phone or tablet. Learn more about Compatible Devices.
Note: SDN switch/router is compatible with Omada App only in controller mode. To use Omada, please update your device's firmware to the latest version.