How to Leave a Powerline network by Pair Button
User Application Requirement
Updated 06-29-2022 02:16:53 AM
99580
99580 Ez a leírás a következő eszköz(ök)re alkalmazható::
as the figure shown below, powerline adapter a, b and c have formed a homeplugav network. the user wants to remove one device (powerline adapter c) from this network.
step 1 press and hold the pair button on powerline adapter c for at least 10 seconds. powerline adapter c will restart.( the pwr led of powerline adapter c will momentarily extinguish and flash during restarting then illuminate steadily.)
note:for homeplugav2 like tl-pa8010p, tl-pa8030p,tl-pa7020p kit please press and hold the pair button for 8 seconds to leave a powerline network.
step 2 wait for the restart process to complete. after this, adapter c is removed from this network.
Ez a GY.I.K. hasznos volt?
Véleménye segíti az oldal fejlesztését
2.20-R1_normal_1582017472992w.jpg)
3.0_1532428956469j.jpg)