Download untuk T2600G-28TS V2

Please choose hardware version:

>How to find the hardware version on a TP-Link device

IMPORTANT: Model and hardware version availability varies by region. Please refer to your TP-Link regional website to determine product availability.
Vx.0=Vx.6/Vx.8/Vx.9(eg:V1.0=V1.6/V1.8V1.9)
Vx.x0=Vx.x6/Vx.x8/Vx.x9 (eg:V1.20=V1.26/V1.28/1.29)
Vx.30=Vx.32/Vx.33 (eg:V3.30=V3.32/V3.33)

Product Overview

T2600G-28TS_V2_Datasheet

Dokumen

T2600G-28TS

MIBs Files

T2600G-28TS(UN)_V2_170928_MIB

Download

Tanggal Publikasi: 2017-09-28

Bahasa: Inggris

Ukuran File: 183.07 KB

Sisterm Operasi: Win2000/XP/2003/Vista/7/8/8.1/10

T2600G-28TS(UN)_V2_MIB_170323

Download

Tanggal Publikasi: 2017-03-23

Bahasa: Inggris

Ukuran File: 196.45 KB

Sisterm Operasi: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux

T2600G-28TS(UN)_V2_170118_MIB

Download

Tanggal Publikasi: 2017-01-18

Bahasa: Inggris

Ukuran File: 189.55 KB

Sisterm Operasi: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux

802.1X Client

TP-LINK_802.1X_Client_Software

Download

Tanggal Publikasi: 2017-09-05

Bahasa: Inggris

Ukuran File: 5.5MB

Sisterm Operasi: Win2000/XP/2003/Vista/7/8/8.1/10

FAQs

How to configure LACP on our Smart/ Managed Switch 10-29-2024236767
How to Block Unknown Devices to Access the Switch by Using IP Source Guard 08-09-202476317
Why the firmware version does not change after upgrading in T Series switches? 08-09-202462862
How to configure the default gateway of the smart and managed switches using the old GUI 08-09-2024259318
What is the Console Cable and the line sequence of it? 08-02-2024129176
How to build a Campus Network using TP-LINK products 08-02-202494377
The difference between the Voice VLAN feature and Auto VOIP feature 07-23-202480315
What should I do if I cannot access the web management page of my TP-Link switch? 07-23-2024350098
Do you still have any doubt about the effect of QoS on the Switch of TP-Link? 07-23-202489599
How to block an illegal client with Certain IP address from getting access to the network using TP-Link Managed Switches 07-01-202479317
How to access TP-Link JetStream Managed Switch via the Console port 06-29-2022365953
How to configure 802.1Q VLAN on L2 Managed switches using the old GUI 06-29-2022423253
How to Configure Port Isolation Function on Our Layer 2 Manage switches through Web Browser 06-29-2022128767
How to limit the port rate of the incoming traffic via ACL function 06-28-202259492
How to test the Jumbo Frame pass-through feature on TP-Link switches 06-28-2022185756
How to build up a multi-nets network via Multi-Nets NAT feature on TP-Link router with L2+/L3 switches 06-28-2022326041
How to change the IP address of the smart and managed switches using the old GUI and CLI 06-28-2022327494
How to configure MAC ACL on Smart/Managed switch 06-28-202285274
How to configure the DHCP Relay in TP-Link Switch 06-27-2022256916
How to change the IP address of the smart and L2 managed switches using the new GUI and CLI 06-27-2022183366
How to configure Voice VLAN to optimize the transmission of voice traffic on TP-Link Smart and Managed Switches using the new GUI 06-27-2022111244
How to configure OpenSSH 7.0(and above) to login smart and managed switches? 04-17-2018133914
The nodes that TP-Link T1600/T2600 series switch use to display the CPU and Memory utilization through SNMP 12-26-201669101
How to configure Extended IP ACL 04-28-201285724

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty.
How to find the hardware version on a TP-Link device
Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

T2600G-28TS(UN)_V2_170527

Download

Tanggal Publikasi: 2017-05-27

Bahasa: Inggris

Ukuran File: 10.81 MB

Modifications and Bug Fixes:

New Features/Enhancement:
1.Added the auto downspeed function.

T2600G-28TS(UN)_ V2_170323

Download

Tanggal Publikasi: 2017-03-23

Bahasa: Inggris

Ukuran File: 10.70 MB

Modifications and Bug Fixes:

New Features/Enhancement:
1.Optimized the CLI function.
2.Added new features, including VLAN-based loopback detection, LACP Pass through, DHCP VLAN relay, packet content ACL, Dynamic VLAN Assignment, MAC based 802.1x, LLDPDU Pass through, NAS ID configuration, QinQ Missdrop and so on.
3.Added basic functions of SNMP. Functions such as cable diagnostic, serial number display, TFTP firmware upgrade can be configured through SNMP.

T2600G-28TS(UN)_V2_170118

Download

Tanggal Publikasi: 2017-01-18

Bahasa: Inggris

Ukuran File: 10.74 MB

Modifications and Bug Fixes:

New Features/Enhancement:
1. LACP protocol is added to support in the L2TP feature.
2. Add the VLAN-Based mode in the Loopback Detection feature.
3. Add the SNMP Trap illegal DHCP server feature in the CLI.
4. Add the command "show access-list status" to check ACL hardware entry table status.
5. Add the command "show running-config [include/exclude/all]"to check the
configuration of the swicth.
6. Fix the SNMP problem, SFP port problem and the Radius problem in the AAA feature.

Notes:

1. For T2600G-28TS(UN)_V2, you can also upgrade this firmware on the T2600G-28TS(UN)_V1.
2.Upgrading the firmware will only upgrade the backup image.
3.Your device's configuration won't be lost after upgrading.

To Use Third Party Firmware In TP-Link Products

Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.

Open Source Code For Programmers (GPL)

Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.

You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.

The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.