Download untuk TL-WA850RE
Vx.0=Vx.6/Vx.8/Vx.9(eg:V1.0=V1.6/V1.8V1.9)
Vx.x0=Vx.x6/Vx.x8/Vx.x9 (eg:V1.20=V1.26/V1.28/1.29)
Vx.30=Vx.32/Vx.33 (eg:V3.30=V3.32/V3.33)
Setup Video
FAQs
- What should I do if the email shows that the link expired when I register cloud account or reset my password?
- How to improve my wireless speed or range
- What can I do if my client can’t roam between my wireless router and TP-Link AP & Range Extender product?
- Why is my TP-Link Range Extender not getting the same speed as the main router?
- How to set up Mac Filtering on router (blue UI) to control the devices connected to the range extender
- The Weak Security and Privacy Warning on the iOS14 or iOS15
- Unable to See the Wi-Fi Name or SSID of the TP-Link Range Extender After Configuration
- What should I do if I fails to login web interface of TP-Link Range Extender?
- How to set up system time of 11N Range Extender (new logo)
- What should I do if I fail to configure TP-Link Range Extender?
- TP-Link Range Extender Stops Working
- Cannot Find the Host Network When Setting up TP-Link Range Extender
- Why I cannot access range extender by using the domain name?
- How to efficiently improve success rate of WPS
- How to upgrade the firmware of the TL-WA850RE
- How to configure my range extender via Web GUI to extend an existing wireless network’s coverage(green UI)
- How to Upgrade TP-Link Wireless Access Point/Range Extender
- How to configure my Range Extender via WPS button to extend an existing wireless network’s coverage
- How to set up Mac Filtering on router to control the devices connected to the Range Extender(Green UI)
- How to log into the Web GUI of my Range Extender via IP address or domain name
- How to use my Range Extender properly if your range extender is configured correctly
- How to configure the range extender as an access point (new logo)
- How to adjust Wi-Fi coverage of TP-Link Range Extender (new logo)
- How to check Internet status of 11N Range Extender (new logo)
- How to configure my 11N Range Extender via Web GUI (new logo)
- How to configure wireless network of 11N Range Extender (new logo)
- How to control LEDs of 11N Range Extender (new logo)
- How to set Access Control of 11N Range Extender (new logo)
- How to upgrade the firmware of 11N Range Extender (new logo)
- How to confirm whether my range extender is successfully configured and in the best location
- Most frequently asked questions about TP-Link range extenders
- How to check whether my Range Extender is using the same SSID with my Router
- How to Boost Your Wi-Fi Signal
- What should I do if my range extender does not extend the Wi-Fi coverage?
- What's the solution if my TP-Link range extender can't connect to my router properly?
- My devices are connected to the range extender but no network access
- What should I do if my computer is connected to the TL-WA850RE but can't connect to the Internet?
- Bagaimana cara login ke halaman manajemen berbasis Web dari Wireless Access Point? (kasus lain)
- How to log into the Web GUI of my brand new 11N Range Extender (new logo)?
- PC cannot open any website when TL-WA850RE connects to BT Home Hub4/5
- My Range Extender won’t connect to my apple Router after pressing the WPS
- Why is my main router’s wireless password changed after using WPS to setup the Range Extender?
Firmware
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty.
How to find the hardware version on a TP-Link device - Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
TL-WA850RE(US)_V3_160927 |
Download | |
|---|---|---|
| Tanggal Publikasi: 2016-09-27 | Bahasa: Inggris | Ukuran File: 3.72 MB |
|
Notes: For TL-WA850RE(US)3.0 only |
||
To Use Third Party Firmware In TP-Link Products
Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.
Apps
- TP-Link Tether
TP-Link Tether provides the easiest way to access and manage your network with your iOS or Android devices. Learn more about TP-Link Tether and Compatible Devices
Note: To use Tether, please update your TP-Link device's firmware to the latest version.
GPL Code
Emulators
Versi Firmware |
Working Mode |
Bahasa |
|
|---|---|---|---|
160922 |
- |
Multi-language |
Catatan:
1. Emulator ini adalah virtual web GUI dimana Anda dapat memprogram firmware produk TP-Link Anda. Untuk rincian tentang fitur dan spesifikasi produk bisa menggunakan fasilitas pencarian dan pergi ke halaman produk.
2. Periksa versi firmware sesuai dengan versi ditampilkan pada antarmuka Emulator. Setiap firmware versi memiliki GUI dan fungsionalitas.
3. Harap dicatat bahwa tidak semua versi firmware yang terwakili di Emulator.