How to Configure the Access Point Mode on the TL-MR3020 and TL-MR3040
User Application Requirement
Updated 05-25-2016 05:53:14 AM
227244
227244 This Article Applies to:
Definition:The TL-MR3020/TL-MR3040 is connected to a wired network and transforms the wired Internet access into wireless so that wireless devices can share the Internet.
Application:
1. Office, hotel and places where only wired network is available.
2. LAN gaming party, small meeting and other situations where a temporary wireless network is needed.
Run Quick Setup
Step 1:
Go to Quick Setup-> Click Next
Step 2:
Select AP-> Click Next
Step 3:
Customize your wireless name (SSID) and password
|
Wireless Radio: Enable
SSID: (Rename Your Wireless Name)
Region:(Select Your Current Location)
Channel: Auto
Mode: 11bgn mixed
Channel Width: Auto
Security Options: WPA-PSK/WPA2-PSK
PSK Password: (Create a Private Password)
Click Next
|
Step 4:
Click: Reboot, and wait until it goes to 100%
Relocate the TL-MR3020/TL-MR3040
You may now connect the TL-MR3020/TL-MR3040 directly into your Wired Ethernet Network Connection as displayed on the picture below.
Congratulations! All your Wi-Fi enabled devices can connect to the customized wireless network.
Computer Setup Reversion
After the configuration, we need change the TCP/IP settings back on the computer.
Get to know more details of each function and configuration please go to Download Center to download the manual of your product.
Is this faq useful?
Your feedback helps improve this site.
