Download for EAP110
Vx.8=Vx.0 ; Vx.x8=Vx.x0 ; Vx.33=Vx.30
For example V1.8=V1.0; V1.28=V1.20
- Product Overview
Setup Video
-
How to Set up a TP-Link EAP via Web browser
This video will demonstrate how to set up a TP-Link EAP via a web browser. The setup consists of three steps:
1. Connect the EAP to the network
2. Log into the EAP (via a wired/wireless connection)
3. Change the default SSID
This video is suitable for users with a small number (1-3) of EAPs .
More Fold
FAQs
- How to configure Fast Roaming on Omada Controller
- How to configure SSID VLAN on Omada AP with Third-Party Gateway
- How do I configure 802.11 Rate Control on the Omada Controller
- Should I keep the Omada Controller running after configuration?
- Getting started with the standalone EAP
- How to get sarted with Standalone Access Points without Omada Controller
- How to configure ACL on Omada AP via Omada Controller
- How to configure abnormal on Omada Pro Controller
- Configure rogue AP detection on EAP/Omada Controller
- How to Change the Default Ports for EAP Controller
- How to configure Multicast Filtering on Omada Controller
- How to choose EAP products
- How to build a Factory Network using TP-Link products
- How to build a Network for Restaurant & Cafe using tp-link products
- How to build a Campus Network using TP-LINK products
- How to build a Wireless Network for Chain Store using tp-link products
- How to build a Wireless Network for Dormitory using tp-link products
- How to build a Wireless Network for School Canteen using tp-link products
- How to build a Wireless Network for Shopping Mall using tp-link products
- Troubleshooting guide of roaming
- Troubleshooting guide of common wireless issues
- How to downgrade firmware of EAP if it is abnormal after the update
- Overview of Omada EAP Power Supply
- Explanation of portal authentication failure after EAP is extended with Range Extenders
- How to use iPerf to test the speed between the EAP and the wireless client
- Common questions about TP-Link EAP device when it’s used in home network
- What should I do when the Omada Software Controller (V3 or below) fails to discover the EAP?
- Troubleshooting of wireless issues for Omada EAP products
- How to view detailed client information of an EAP
- What can I do if I fail to log in to the EAP via the domain name?
- How do I upgrade the firmware of my EAP device via web browser?
- What is TP-Link EAP/CAP MU-MIMO?
- What is TP-Link EAP Beamforming?
- What is TP-Link EAP/CAP Airtime Fairness?
- Q&A for TP-Link Omada App
- Getting started without an Omada Controller
- How to configure Management VLANs for Omada Switches and APs (for SOHO scenario)
- How to configure Management VLANs for Omada Switches and APs (for Business scenario)
- Basic introduction to AP Mesh and Fast Roaming
- Why my clients don't roam or connect to the nearest AP
- Do I need to keep Omada Controller running when using portal authentication?
- What Is the difference between Login Account, Cloud Account, Device Account and User Account in Omada Controller?
- What should I do if I got a certificate error?
- Frequently asked questions of EAP Series Access Points
- Troubleshooting for Wireless Client Cannot Access the Internet
- Unable to connect to EAP WiFi
- How to optimize wireless performance of EAP products
- How do I find the firmware version of my EAP device?
- API and Code Sample for External Portal Server (Omada Controller 2.6.0 to 3.2.17)
- API and Code Sample for External Portal Server (Omada Controller 2.5.4 or below)
- API and Code Sample for RADIUS Server with External Web Portal (Omada Controller 3.0.5 or below)
- How to set Access Control to create guest SSID on Omada Controller/EAP
- Configuration Guide on EAP-TLS authentication for WPA-Enterprise (with FreeRADIUS)
- How to deploy EAP controller on a private cloud (AWS EC2)
- How to set up different SSIDs and Passwords for each EAP through EAP Controller
- How to manage EAPs in different subnets using Omada controller (via EAP Discover Utility) (Old UI)
- How to manage EAPs in different subnets using Omada Controller (via DHCP option 138) (Old UI)
- How to manage EAPs at different sites across Internet using Omada Controller (via VPN Tunnel with EAP Discover Utility) (Old UI)
- How to manage EAPs at different sites across Internet using Omada Controller (via VPN Tunnel with DHCP Option138) (Old UI)
- How to manage EAPs at different sites across Internet using Omada Controller (via NAT Port Forwarding for Controller Host with EAP Discover Utility) (Old UI)
- How to manage EAPs at different sites across Internet using Omada Controller (via NAT Port Forwarding for Controller Host with DHCP Option138) (Old UI)
- How to manage EAPs in different VLANs using Omada Controller (Old UI)
- How to Change the Language of the Printed Voucher Code
- How to Configure Band Steering on TP-Link Omada Controller
- How to Configure Load Balance on Omada Controller
- How to Configure Reboot schedule and Wi-Fi Scheduler function of Omada Controller
- How to manage EAPs in different subnets using Omada controller (via EAP Discovery Utility) (New UI)
- How to manage EAPs at different places across Internet using Omada Controller (via NAT Port Forwarding and DHCP Option 138) (New UI)
- What if I forget the password of EAP Controller?
- How to configure Multiple SSIDs with Multiple Subnets on EAP products
- What should be noticed when running the EAP Controller for the first time?
- How to adopt EAP in Controller Mode?
- How to Configure Omada Controller as a Windows Service(above Controller 2.5.4)
- How do I login to the web management page of the EAP Series products (Standalone mode)?
- Source code template for External Web Portal (Standalone Mode)
- How to manage EAPs at different places across internet using Omada Controller (via NAT Port Forwarding and EAP Discovery Utility)? (New UI)
- How to configure basic wireless settings of my TP-Link EAP in Standalone mode?
- How to configure basic wireless settings of my TP-Link EAP via Omada Controller?
- How to set up rate limit through EAP controller
- How to configure free authentication policy on EAP Controller
- How to Manage EAPs at Different Locations
- Hotspot authentication for multiple subnet with different VLANs
Firmware
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty.
How to find the hardware version on a TP-Link device - Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
EAP110(US)_V4.8_5.0.4 Build 20220216 |
Download | |
|---|---|---|
| Published Date: 2022-07-06 | Language: English | File Size: 5.63 MB |
|
This firmware is fully adapted to Omada SDN Controller V5.1. |
||
|
EAP110(US)_V4.8_5.0.3 Build 20211022 |
Download | |
|---|---|---|
| Published Date: 2022-07-06 | Language: English | File Size: 5.58 MB |
|
This firmware fully adapts the Omada SDN Controller v5 but only compatible with Omada Controller v4.1.5 or above. With this firmware, port 29814 instead of ports 29811/29812/29813 is used when EAP is managed by Omada SDN Controller v5. |
||
|
EAP110(US)_V4.8_5.0.2 Build 20210604 |
Download | |
|---|---|---|
| Published Date: 2022-07-06 | Language: English | File Size: 5.41 MB |
|
This firmware fully adapts the Omada SDN platform and only compatible with Omada Controller v4.1.5 or above. If you are using an old Omada controller and plan to upgrade this firmware for EAP, you must upgrade the Omada Controller as well: Upgrade Guide |
||
To Use Third Party Firmware In TP-Link Products
Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.
Apps
- Omada APP
TP-Link Omada lets you configure settings, monitor network status and manage clients, all from the convenience of a smart phone or tablet. Learn more about Compatible Devices.
Note: SDN switch/router is compatible with Omada App only in controller mode. To use Omada, please update your device's firmware to the latest version.