SX3032F
NewOmada Switch Managed L2+ con 32 Porte 10GE SFP+
- 32× Slot 10 Gbps SFP+
- Capacità di Switching 640 Gbps
- Due moduli di alimentazione interna fissi si supportano reciprocamente
- Gestione centralizzata in cloud via web o con l'app Omada†
- Gestione standalone via web, CLI, SNMP e RMON
- Static Routing per gestire il traffico interno con maggiore efficienza
- VLAN, ACL, QoS, IGMP Snooping, OAM e DDM
- ERPS supporta una protezione rapida e il recupero in una ring topology
- Case in metallo e design rack-mountable
Scopri di più su Omada Cloud SDN >
Scopri di più sulla tecnologia Omada Multi-Gig >
Omada Switch Managed L2+
con 32 porte 10GE SFP+
SX3032F
-
Ideale per l'uso in
livelli di aggregazione -
32× Slot
10 Gbps SFP+ -
1+1 Alimentazione
Ridondata -
Zero-Touch
Provisioning† -
Gestione
centralizzata† -
App
Omada† -
Ethernet Ring
Protection Switching -
Static
Routing
Crea una rete multi-gigabit da 10G
-
Switch con
Uplink 10G -
Switch PoE
con Uplink 10G -
AP Wi-Fi 7/6
con porte 10G/2.5G
Software-Defined Networking (SDN) con gestione in Cloud
Gestisci da remoto i tuoi access point, switch e gateway: tutto da un'unica interfaccia.
Controller
Accesso in Cloud
| CARATTERISTICHE HARDWARE | |
|---|---|
| Interfaccia | • 32× 1/10Gbps SFP+ Slots• 1× RJ45 Console Port• 1× Micro-USB Console Port |
| Numero ventole | 2 internal fixed fans |
| Physical security lock | √ |
| Alimentazione | • 1+1 Redundant Power Supply (internal fixed)• 100-240 V AC~50/60 Hz |
| Dimensioni ( L x P x A ) | 17.3×13.0×1.7 in (440×330×44 mm) |
| Tipo di montaggio | Rack Mountable |
| Max Power Consumption | 49.4 W (220 V / 50 Hz) |
| PRESTAZIONI | |
|---|---|
| Capacità di switching | 640 Gbps |
| Packet Forwarding Rate | 240 Mpps |
| Tabella ARP | 32 K |
| Buffer (pacchetti) | 24 Mbit |
| Jumbo frame | 9 KB |
| CARATTERISTICHE SOFTWARE | |
|---|---|
| QoS (Quality of Service) | • 8 priority queues• 802.1p CoS/DSCP priority• Queue scheduling: SP (Strict Priority), WRR (Weighted Round Robin), SP+WRR• Bandwidth Control: Port/Flow-based Rating Limiting• Smoother Performance• Action for Flows: QoS remark (802.1P Remark, DSCP Remark) |
| Funzionalità L2 e L2+ | • 128 IP Interfaces: Support IPv4/IPv6 Interface• Static Routing: 48 IPv4/IPv6 Static Routes• Static ARP: 128 static entries• 510 ARP Entries• Proxy ARP• Gratuitous ARP• DHCP Server• DHCP Relay: DHCP Interface Relay, DHCP VLAN Relay• DHCP L2 Relay• Link Aggregation• Spanning Tree Protocol• Loopback Detection• 802.3x Flow Control• Mirroring |
| L2 Multicast | • Supports 4000 (IPv4, IPv6) IGMP groups• IGMP Snooping• IGMP Authentication• Multicast VLAN Registration (MVR)• MLD Snooping• Multicast Filtering: 256 profiles and 16 entries per profile |
| Caratteristiche avanzate | • Automatic Device Discovery†• Batch Configuration†• Batch Firmware Upgrading†• Intelligent Network Monitoring†• Unified Configuration†• Reboot Schedule†ISP Features:• L2PT (Layer 2 Protocol Tunneling) • Device Link Detect Protocol (DLDP)• PPPoE ID Insertion• ERPS• 802.3ah Ethernet Link OAM• DDM• sFlow |
| VLAN | • VLAN Group (802.1q VLAN): Max 4K VLAN Groups• 802.1Q Tagged VLAN• MAC VLAN: 30 Entries• Protocol VLAN• GVRP• VLAN VPN (QinQ): VLAN Mapping, VLAN Replace• Voice VLAN |
| ACL (Access Control List) | • Time-based ACL• MAC ACL: Source MAC, Destination MAC, VLAN ID, User Priority, Ether Type• IP ACL: Source IP, Destination IP, Fragment, IP Protocol, TCP Flag, TCP/UDP Port, DSCP/IP TOS• Combined ACL• Packet Content ACL• IPv6 ACL• Policy: Mirroring, Redirect, Rate Limit, QoS Remark• ACL applies to Port/VLAN |
| Sicurezza | • IP-MAC-Port Binding - 512 Entries - DHCP Snooping - ARP Inspection - IPv4 Source Guard• IPv6-MAC-Port Binding - 512 Entries - DHCPv6 Snooping - ND Detection - ND Snooping - IPv6 Source Guard• DoS Defend• Static/Dynamic Port Security: Up to 64 MAC addresses per port• Broadcast/Multicast/Unicast Storm Control: kbps/ratio control mode• 802.1X - Port base authentication - MAC-based authentication - VLAN Assignment - MAB - Guest VLAN - Radius authentication and accountability support• AAA (including TACACS+)• Port Isolation• Secure web management through HTTPS with SSLv3/TLS 1.2• Secure Command Line Interface (CLI) management with SSHv1/SSHv2• IP/Port/MAC-based access control |
| IPv6 | • IPv6 Dual IPv4/IPv6• Multicast Listener Discovery (MLD) Snooping• IPv6 ACL• IPv6 Interface• Static IPv6 Routing• IPv6 neighbor discovery (ND)• Path maximum transmission unit (MTU) discovery• Internet Control Message Protocol (ICMP) version 6• TCPv6/UDPv6• IPv6 applications: DHCPv6 Client, Ping6, Tracert6, Telnet (v6), IPv6 SNMP, IPv6 SSH, IPv6 SSL, Http/Https, IPv6 TFTP |
| MIBs | • MIB II (RFC1213)• Interface MIB (RFC2233)• Ethernet Interface MIB (RFC1643)• Bridge MIB (RFC1493)• P/Q-Bridge MIB (RFC2674)• RMON MIB (RFC2819)• RMON2 MIB (RFC2021)• Radius Accounting Client MIB (RFC2620)• Radius Authentication Client MIB (RFC2618)• Remote Ping, Traceroute MIB (RFC2925)• Support TP-Link private MIB |
| GESTIONE | |
|---|---|
| Omada App | Yes. Requires the use of Omada Hardware Controller, Omada Cloud-Based Controller, or Omada Software Controller. |
| Centralized Management | • Omada Cloud-Based Controller• Omada Hardware Controller• Omada Software Controller |
| Cloud Access | Yes. Requires the use of Omada Hardware Controller, Omada Cloud-Based Controller, or Omada Software Controller. |
| Zero-Touch Provisioning | Yes. Requires the use of Omada Cloud-Based Controller. |
| Management Features | • Web-based GUI• Command Line Interface (CLI) through the console port, telnet• SNMP v1/v2c/v3: Trap/Inform, RMON (1,2,3,9 groups)• SDM Template• DHCP/BOOTP Client• 802.1ab LLDP/LLDP-MED• DHCP Auto Install• Dual Image, Dual Configuration• CPU Monitoring• Password Recovery• SNTP• System Log |
| ALTRO | |
|---|---|
| Certificazione | CE, FCC, RoHS |
| Contenuto della confezione | • SX3032F Switch• 2× Power Cords• Quick Installation Guide• Rackmount Kit• Rubber Feet |
| Requisiti di sistema | Microsoft® Windows® 98SE, NT, 2000, XP, Vista™ or Windows 7/8/10/11, MAC® OS, NetWare®, UNIX® or Linux. |
| Ambiente | • Operating Temperature: -5–45 °C (23–113 °F);• Storage Temperature: -40–70 ℃ (-40–158 ℉)• Operating Humidity: 10–90% RH non-condensing• Storage Humidity: 5–90% RH non-condensing |
† Queste funzioni richiedono l'utilizzo del controller Omada SDN. Il provisioning automatico Zero-Touch richiede l'uso del controller Cloud-Based Omada. Visita la Lista dei controller Omada Cloud-Based per trovare tutti i modellli supportati del Controller Omada Cloud-Based.
NB: è consigliato usare al massimo un modulo 8 SM5310-T (TL-SM5310-T) con SX3032F, con un modulo utilizzato per ogni due set di slot SFP+.