Tapo D235
신규 제품Tapo Video Doorbell Camera
- 210-Day Battery or Wired: 10000mAh battery or 8-24V hardwired, supports pre-roll when hardwired.
- 2K 5MP Clarity: Provides finer details and incredible clarity.
- 180° Ultra-Wide View: Captures everything from head-to-toe.
- Full Color Night Vision with Spotlight: Vivid night visibility and security.
- Free Detection and Notification: Alerts for person, vehicle, pet, and package.
- Two-Way Audio: High-quality talk with premium mic and speakers.
- Quick Response: Rapid reaction to any situation.
- IP66 Weatherproof: Reliable in all weather conditions.
- Local and Cloud Storage: Supports microSD card (up to 512GB) and Tapo Care cloud services.
Smart.Secure.Easy.
Always Know Who’s There
Video Doorbell Camera
Tapo D235
-
Hardwire & Battery
Power Supply -
Chime
Included -
IP66 Water &
Dust Resistance
Live View + Starlight Sensor
4:3 /180° filed of View 140°
Hardwire Supported 210 Day
Person / Pet / Vehicle / Package
2K 5MP Head-to-Toe 180° DFOV
Details matter, and with 2K 5MP clarity, D235 exceeds traditional Full HD resolution with finer details and incredible clarity. Experience the full picture with our 180° ultra-wide field of view, capturing every detail from head to toe in a single sweeping glance.
Various Power Supply Methods
Flexible Wedges, Flexible Views
Different wedge choices give users possibilities to make the doorbell suits more placement scenarios. Users can also use these wedges to adjust the views.
Local and Cloud Storage
Save recorded videos on the microSD Card* (up to 512 GB, purchased separately) or use Tapo Care cloud storage services (subscribe separately).
Up to
512 GB
Smart AI Detection and Notification
Smart AI identifies people, pets, vehicles, and packages, notifying users as needed.
Install Your Doorbell
Step 1
Option 1: Stick to the wall
Attach the included adhesive to the back of the bracket or the wedge you have selected. If you use the wedge, affix the bracket and the wedge with screws.
3M Adhesive
or
Mounting Wedge
Route the wires through the bracket (if there are existing wires) . Wipe off the dust from the surface using a dry cloth, stick the bracket with adhesive to the smooth wall, and press it down for 15 seconds to ensure the bracket is firmly attached.
or
Option 2: Mount to the wall
Route the wires (if there are existing wires) through the mounting template and stick the template. Drill two holes where indicated.
Φ=6 mm (15/64 in.)
Route the wires (if there are existing wires) through the bracket. Insert two anchors into the holes and use the screws to affix the bracket over the anchors.
Step 2 Mount the doorbell to the bracket
Option 1: Battery Powered
Mount the doorbell to the bracket.
Option 2: Hardwire Powered
Connect the wires to the doorbell and tighten the screws. Mount the doorbell to the bracket and turn on the circuit breaker.
If the wires are too short
카메라 | |
---|---|
이미지 센서 | 1/2.7“ Progressive Scan CMOS Sensor |
렌즈 | Focal Length: 1.18mmAperture: F1.8Field of View: 170.6° (Horizontal), 140.1° (Vertical) |
나이트 비전 | 850 nm IR LED (33 ft / 10 m)Full-Color Night Vision |
조명 | Built-in Spotlights |
인터페이스 및 버튼 | 1× RESET /SYNC Button1× Doorbell Button1× Anti-Theft Button1× Power ON/OFF Button |
비디오 및 오디오 | |
---|---|
최대 해상도 | 2K 5MP (2560 × 1920px) |
프레임 레이트 | 15/20 fps |
비디오 압축 | H.264 |
라이브 뷰 | Yes |
이미지 개선 | 3DNRWDR |
오디오 입력 및 출력 | Built-in Microphone and Speaker |
오디오 통신 | Two-Way Audio with Noise Cancellation |
사이렌 볼륨 | 98dB (Level measured at 4-inch/10-cm distance) |
스토리지 | |
---|---|
로컬 스토리지 | MicroSD Card Slot (Up to 512 GB) |
클라우드 스토리지 | Tapo Care Cloud Storage Services (Subscription required) |
감지 및 알림 | |
---|---|
센서 | Single PIR Motion Sensor (FOV: 130° horizontal)One Ambient Light Sensor |
AI 감지 | Motion DetectionPerson DetectionPet DetectionVehicle DetectionPackage Detection |
활동 영역 | Yes*Only works with Motion Detection. |
출력 알림 | System NotificationSystem Notification with Snapshot (Tapo Care Services) |
네트워크 | |
---|---|
네트워크 연결 | IEEE 802.11b/g/n, 2.4 GHz Wi-Fi |
보안 | |
---|---|
보안 | On-Device Machine Learning128-bit AES Encryption with SSL/TLSWPA/WPA2-PSK |
전원 | |
---|---|
전원 소스 | 10000 mAh Built-in Rechargeable Lithium-ion BatteryHardwire chargeHardwire supply |
입력 전압 | Doorbell Battery Pack Adapter Input: 100-240 V, 50/60 Hz |
출력 전압 | Doorbell Battery Pack Adapter Output: 5.0 V, 2.0 A |
일반 | |
---|---|
스마트 통합 | Google Assistant, Amazon Alexa |
내후성 | IP66 |
시스템 요구사항 | Tapo App: iOS 12.0 or higher, Andriod 4.4 or higher |
장착 옵션 | Stick to a WallMount to a Wall |
작동 온도 | -20℃~45℃ |
보관 온도 | -40℃~60℃ |
작동 습도 | 10%~90% RH, Non-condensing |
보관 습도 | 0~90% RH, Non-condensing |
충전 온도 | 0-45℃ |
크기 | Doorbell Dimensions: 2.13 × 1.97 × 1.52 in (150 × 50 × 38.4 mm)Chime Dimensions:US/JP Version: 2.87×1.85×1.71 in (73×46.9×43.5 mm)EU Version: 2.87 × 2.15 × 1.89 in (73×54.6×48 mm)UK Version: 2.87×2.45×1.71 in (73×62.3×43.5 mm)KR Version: 2.87×2.46×1.71 in (73×62.4×43.5mm)AU Version: 2.87×2.01×1.71 in (73×51×43.5 mm) |
패키지 구성품 | Tapo Video Doorbell × 1Tapo Chime × 1Mounting Template × 1Mounting Bracket × 1Vertical Mounting Wedge× 1Horizontal Mounting Wedge × 1USB Adapter Cable × 1Jumper for Existing Chime × 1Extension Wires × 2Mounting Screws and Anchors × 3Hardwire Installation Screws × 2Doorbell Detaching Pin × 1Mounting Wedge Screws × 53M Adhesive × 1Foam Pad × 1Wire Nuts × 2Quick Start Guide |
인증 | CE, RoHS, RCM,R-NZ,FCC, EAC, Triman, UKCA |