How to bind IP Address and MAC Address of TP-Link Wireless N 4G LTE Router (new logo)

Here takes TL-MR6400 as demonstration.

1. Log into the router’s web management page:

How do I log into the web-based Management Page of TL-MR6400 (new logo)?

2. Go to IP &MAC Binding menu: Binding Settings and ARP List.

Binding Settings

This page displays the Binding Settings table, you can operate it in accord with your desire.

MAC Address - The MAC address of the controlled computer in the LAN.

IP Address - The assigned IP address of the controlled computer in the LAN.

Bind - Check this option to enable ARP binding for a specific device.

Modify - To modify or delete an existing entry.

When you want to add or modify an IP & MAC Binding entry, you can click Add New or Modify, and then you will go to the next page. This page is used for adding or modifying an IP & MAC Binding entry.

To add IP & MAC Binding entries, follow the steps below.

1. Click Add New....

2. Enter the MAC Address and IP Address.

3. Select the Bind checkbox.

4. Click Save.

To modify or delete an existing entry, follow the steps below.

1. Find the desired entry in the table.

2. Click Modify or Delete as desired on the Modify column.

To find an existing entry, follow the steps below.

1. Click Find.

2. Enter the MAC Address or IP Address.

3. Click Find in the page as shown below.

ARP List

To manage the computer, you could observe the computers in the LAN by checking the relationship of MAC address and IP address on the ARP list, and you could configure the items on the ARP list also.

MAC Address - The MAC address of the controlled computer in the LAN.

IP Address - The assigned IP address of the controlled computer in the LAN.

Status - Indicates whether or not the MAC and IP addresses are bound.

Load - Load the item to the IP & MAC Binding list.

Delete - Delete the item from the list.

Click the Bind All button to bind all the current items, available after enable.

Click the Load All button to load all items to the IP & MAC Binding list.

Click the Refresh button to refresh all items.

Note: An item cannot be loaded to the IP & MAC Binding list if the IP address of the item has been loaded before. Error warning will prompt as well. Likewise, "Load All" only loads the items have no interference with the IP & MAC Binding list.

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.