How to change wireless channel on my TP-Link wireless ADSL2+ modem router
User Application Requirement
Updated 05-25-2016 03:12:18 AM
249993
249993 This Article Applies to:
Wireless modem routers use the auto wireless channel that changes from time to time, sometimes it would be better to set a static channel for better wireless performance.
Step 1
Open the web browser and type the IP address of the device in the address bar (default is 192.168.1.1). Press Enter.
Step 2
Type the username and password in the login page, the default username and password both are admin and thenclick OK to login the web page.
Step 3
For TD-W8950ND/TD-W8968/TD-VG3631:
Click on Wireless->Basic on the left, change the Channel from Auto to a static one, such as 1, 6 or 11, and then Apply/Save.
For some modems, after you save the settings, it will ask you to reboot the device. Then please follow the instructions to reboot the modem.
.jpg)
For TD-W8960N, TD-W8920G, TD-W8910G:
Click on Wireless->Advanced on the left, change the Channel from Auto to a static one, such as 1, 6 or 11, and then Apply/Save.
.jpg)
For TD-W8961N, TD-W8961NB, TD-W8951ND, TD-W8951NB, TD-W8901G, TD-W8901GB, TD-W8101G,TD-W8151N:
Click on Interface Setup->Wireless at the top, change the Channel from Auto to a static one, such as 1, 6 or 11, and then click Save.
.jpg)
Get to know more details of each function and configuration please go to Download Center to download the manual of your product.
Is this faq useful?
Your feedback helps improve this site.