No internet connection when using TP-Link Wireless 4G LTE Router working as 3G/4G Router Mode(Case 1)
550033 Note: This article is applied in the following situation: you can connect to the wireless of Archer MR200, but none of your devices can get internet access and you might see the following icon on your computer.
Preparation: log in the web interface (click here to see how to do this) ----check the Ip address in the Internet window on Status page under Advanced.
If the Ip address is not 0.0.0.0, then refer to this FAQ.
If the IP address is 0.0.0.0, it means the router is not connected to the internet yet. The reason can be that the SIM card’s supporting BAND is not the same as this router’s or the router’s pre-configured APN profile doesn’t match with your SIM card etc.
Solution
1: SIM card’s supporting band doesn’t match the router
The phenomenon can be that a SIM card has been detected but Network Type shows “No Service” on the Status page.
Solution: Make sure the SIM card itself works fine on another 4G router or your phone. Reset the router to factory defaults by holding the reset button for about 10s. If still the same, check with your SIM card carrier to confirm the Network Type and Band supported by the SIM card, then you may compare them with Network Type and Band supported by the 4G router displayed on our Official Web Site (Use Archer MR200 as an example).
2. The SIM Card is locked by PIN code.
Solution: Enter the PIN code of your SIM card to unlock it, you have three chances of mistyping it, if you are not sure about it, contact your SIM card carrier to confirm it.
3: The router’s pre-configured APN profile doesn’t match with your SIM card
APN profile of known carriers are pre-configured in the router, but sometimes, your carrier may change their APN without our notice, or the carrier may have different APN profiles for different SIM card packages
Solution: Choose other available profiles in the Profile Name list or create a profile manually.
If there are no other available profiles, the following information will be needed to create a profile manually, if you are not sure about it, contact your SIM card carrier to confirm it:
After you do the above troubleshooting, if still no internet access, you may update the firmware to the latest one for a try, please refer to this FAQ.
Get to know more details of each function and configuration please go to Download Center to download the manual of your product.
Is this faq useful?
Your feedback helps improve this site.
TP-Link Community
Still need help? Search for answers, ask questions, and get help from TP-Link experts and other users around the world.